From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Requesting servo cams with a 40 degree angle instead of the instructed 45 degrees for the 6-B-IV Servo chassis.
| Identifier | ExFiles\Box 87\5\ scan0065 | |
| Date | 1st January 1937 | |
| To HPS.{Horace Percy Smith - Experimental Factory Mgr} Rm{William Robotham - Chief Engineer}/FJH.{Fred J. Hardy - Chief Dev. Engineer}10/JH.1.1.37. 6-B-IV Servo. We wish to have for use on the above chassis some servo cams wihh 40° angle instead of the 45° angle at present instructed. Will you please detail cams to Hs.{Lord Ernest Hives - Chair}1631 with 40° angle and make two sets as soon as possible, 1 set to be sent out to France. Rm{William Robotham - Chief Engineer}/F.J.Hardy. | ||