Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Standardisation of chassis parts relating to the crankcase vent.

Identifier  ExFiles\Box 74\3\  scan0138
Date  4th September 1922
  
R.R. 755 (5 H) (S.J. 291. 1k-10-21) G.{Mr Griffiths - Chief Accountant / Mr Gnapp} 3037.
X3908
COMPLETED 18.9.22.
STANDARDISATION of CHASSIS PARTS.
Date 4.9.22.
X No. 3908
Description of Parts.
CRANKCASE VENT.
Drawing No.
Part List
Origin.
To prevent crankcase fumes getting into bodies.
Experimental Test Report.
An extension is fitted from the crankcase breather to the carburetter. All fumes are taken in through the carburetter - similar scheme used on Goshawk 11.
Road Test Report.
Fitted to 5 or 6 customers cars and has given satisfaction. Repair Dept. have made demands for these. Run on Expl: cars 12,500 miles.
A Scrap and replace at all costs, including Chassis already delivered to customers.
B Scrap and replace on Chassis in works.
C Scrap present stock and replace on all Chassis not yet handed to test.
D Use existing stock Alteration effective on future Chassis.
Cost of Parts in Works which will be scrapped if commenced on :-
Series......... £.........
Series......... £.........
Series......... £.........
Storekeeper advised re above:
Storekeeper's Signature
Signature of Exp. Dept. that above is correct. E.Hives.
Weight of Old Part. Cost of Old Part. £0. 9. 2
Weight of New Part. Cost of New Part. £0. 14. 10
Difference per Car. Difference per Car. £0. 5. 8 increase.
Signature of Mr. De LOOSE that above is correct. My/JW 8.9.22
SIGNATURES | DATE | REMARKS
Mr. JOHNSON / Mr. B.Johnson. | 13.9.22 | Agreed. C.Johnson.
| 13.9.22 | Agreed. B.J. (Presume no scrap as it is not mentioned)
Mr. ROYCE | 15.9.22 | Agreed. FHR.
Mr. WORMALD | 11.9.22 | Agreed. Wor.{Arthur Wormald - General Works Manager}
Mr. ROWLEDGE | 4.9.22 | Agreed. Rg.{Mr Rowledge}
Mr. DAY | 5.9.22 | Agreed. Da.{Bernard Day - Chassis Design}
Mr. BAILEY | 4.9.22 | Agreed. BY.{R.W. Bailey - Chief Engineer}
Mr. PLATFORD | 11.9.22 | Agreed - successfully used on American R-R cars for some time. EP.{G. Eric Platford - Chief Quality Engineer}
Mr. NORTHEY | 6.9.22 | Agreed. PN.{Mr Northey}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙