From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Mr. Royce's recommendation for wiring the starter switch in series to simplify connections.
| Identifier | WestWitteringFiles\C\May1919\ Scan14 | |
| Date | 17th May 1919 | |
| To BY.{R.W. Bailey - Chief Engineer} from E.{Mr Elliott - Chief Engineer} -2- El/G17/5/19 Contd. on this point. Mr. Royce considers that the main switch and actuating switch of the starter would be better joined in series instead of in parallel, for the purpose of simplifying the connections. This would require coarser wire. It should be clearly understood that Lec.1089 is only diagrammatic, and is not intended to be an actual scheme of the board so far as linear sizes go. Mr. Royce would like schemes prepared in Derby, shewing complete details of the connections and other features of the board. Mr. Clark should inspect Lec.1089 E.{Mr Elliott - Chief Engineer} | ||