Instructions regarding the supply and material change of brake linings for the Wraith III chassis.
| Identifier | ExFiles\Box 7\7\ X 606 Brakes-page094 | |
| Date | 16th December 1937 | |
| To. [illegible] cc. [illegible] cc. HPO/ANF c. Rm {William Robotham - Chief Engineer} /AFM. {Anthony F. Martindale} 606 HY {Tom Haldenby - Plant Engineer} /CRL. {C. R. Lisson} S/E.16.12.37. WRAITH III. CHASSIS. (6 SETS). File REAR BRAKES. SECTION 6120. FRONT BRAKES. SECTION 7043. Please receive herewith two blue prints of each of the following :- Sec.7043. GW.1891. Brake Lining. 4 off per set. Sec.6120. GW.1892. Brake Lining. 4 off per set. The above pieces have been produced at Mr. Martindale's request in Thermoid D.35. I.H. Material in place of Ferodo HX. Quality. It is intended that the above pieces shall be cut to length to suit the Main and Auxiliary Shoes as follows :- Sec.7043. GW.1891. makes - GW.1871. and GW.1872. Sec.6120. GW.1892. " - GW.1873. and GW.1874. This completes the instructions for the above from "G" Department. Tracings and one blueprint herewith to KBC/CAN. One set of prints attached herewith to Rm {William Robotham - Chief Engineer} /AFM {Anthony F. Martindale} 's copy and HPG/RH. {R. Hollingworth} Kindly instruct. R [Signature] HY {Tom Haldenby - Plant Engineer} /CRL. {C. R. Lisson} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).