The wiring connections for fitting a Bosch coil to vehicle 28.G.VI.
| Identifier | ExFiles\Box 164\5\ img427 | |
| Date | 20th May 1939 | |
| 6017 To HPS {Horace Percy Smith - Experimental Factory Mgr} /WSC. {W. S. Cassel} from Rm {William Robotham - Chief Engineer} /RC. {R. Childs} c. Rm {William Robotham - Chief Engineer} /FD. {Frank Dodd - Bodies} c. Rm {William Robotham - Chief Engineer} /RC {R. Childs} /MC. Rm {William Robotham - Chief Engineer} /RC. {R. Childs} 4/MH. {M. Huckerby} 20.5.39. RE BOSCH COIL. Will you please arrange for a coil of the above type, which will be handed over by the Laboratory, to be fitted to 28.G.VI. The following connections should be made:- Coil Terminal "15". To positive side of ballast. (No ballast is required. Coil Terminal "16". To terminal "10" on switchbox or to terminal "I" on main switch. X Coil Terminal 1. To "LT" distributor terminal. Coil Terminal 4. To "HT" distributor. RM {William Robotham - Chief Engineer} /RC. {R. Childs} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).