Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Centralised chassis lubrication for the India 3 model, including battery suspension and an experiment with cadmium plating.

Identifier  ExFiles\Box 26\5\  Scan124
Date  7th March 1928
  
BY.{R.W. Bailey - Chief Engineer} from DA.{Bernard Day - Chassis Design}
c. to BJ. Hs.{Lord Ernest Hives - Chair}

X3806

DAL/M17.3.28.

INDIA 3 - CENTRALISED CHASSIS LUBRICATION ETC.

X.3806
X.1360

We send herewith N.sch.2561 shewing the application of centralised lubrication to the rear springs front end, and the carrier levers.

On this drg. we have also shewn the battery suspension and cross member.

The arrangement of lubrication shewn depends on the proposed experiment with cadmium plating to avoid lubrication of the brake gear on the axle being a success. If not it will be necessary to get on to the front axle by means of a pipe along the springs, and we are sending some proposals for this on additional schemes.

We have shewn a drip plug to N.sch.2502 for the sake of consistency, but if these are not available the American plug can be used without material alteration.

the battery is exactly the present std. without alteration.

Will you kindly send us an extra print for R.{Sir Henry Royce}

DA.{Bernard Day - Chassis Design}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙