Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Register of part drawings with titles and applicability checks against various models.

Identifier  ExFiles\Box 171\4\  img064
Date  20th February 1926
  
[Column Headers]
TITLE, C, Ph, Sp{Mr Spinney}, R, Los, B, By, EPD, F, ANC, P, C, Sp{Mr Spinney}, R, Los, B, EPD, F, A, L, C, W, H, R, P

[Top Right Corner Notes]
Sent for comt.
20/2/26
Sent 7.6.30 Comt.
50.15 7.6.30
Sent 19.6.30 Comt.
.20

[Table Content]
Part No.: x4442
TITLE: Untarnishable finish to Chassis parts.
Note: Sent for comt. 20/26 PII.

Part No.: x842 x7480
TITLE: Automatic oiling of Clutch Spigot Bearing.
Note: PII.

Part No.: x7080
TITLE: Trunnion pin feed pipe to Carburetter.
Note: PII.

Part No.: x7480
TITLE: Supporting Stay to Clutch Pedal Shaft.
Note: PII.

Part No.: x7060
TITLE: Asbestos Valve Gland Rabbits.
Note: PII.

Part No.: x6020
TITLE: Aluminium ignition Conduit with Ebonite inserts.
Note: BII.O

Part No.: x7580 x5580.
TITLE: Revised Wheel Kit.
Note: BII.O

Part No.: x7370
TITLE: Sowo Fabric secured to pressure plate by Staples etc.
Note: PII

Part No.: x7306
TITLE: HS{Lord Ernest Hives - Chair} Coil Armature dynamo with two piece mod. for bottom fixings.
Note: PII
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙