From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Parts and drawings required for a hydraulic measuring unit for all chassis.
| Identifier | ExFiles\Box 133\4\ scan0357 | |
| Date | 17th February 1939 | |
| 1126 c. Rm.{William Robotham - Chief Engineer} By/Ald.{F. Allwood - Experimental Design}1/AW.17.2.39. HYDRAULIC MEASURING UNIT. ALL CHASSIS. Please receive herewith 2 Blue Prints of the following drawings:- SCD. 1175. - Hydraulic Measuring Unit. 1 off. EXS. 1432. - Piston. 1 off. EXS. 1433. - Adaptor. 1 off. EXS. 1434. - Adaptor. 1 off. EXS. 1435. - Washer. 1 off. EXS. 1436. - Washer. 1 off. EXS. 1437. - Cast Iron Block. 1 off. The following standard parts will also be required:- KB. 1064. - Plug. 1 off. KB. 1082. - Washer. 1 off. KB. 1077. - Washer. 1 off. F.{Mr Friese} 9771. - Enots. Lubricator. 1 off. F.{Mr Friese} 9775. - Cap - Lubricator. 1 off. KB. 1085. - Washer. 1 off. F.{Mr Friese} 87462. - Spring. 1 off. .250 dia. - Steel Ball. 1 off. One Hopkinson Pressure gauge as ordered by Rm{William Robotham - Chief Engineer}/GRY.{Shadwell Grylls} The above drawings have been made in accordance with memo Rm{William Robotham - Chief Engineer}/GRY.{Shadwell Grylls}1/MH.{M. Huckerby}7.2.39. Kindly instruct one set. Ald{F. Allwood - Experimental Design} By/Ald.{F. Allwood - Experimental Design} | ||