Scheme for a locating screw for threaded bushes on rear springs for Bentley 3, 50 and Wraith 80 models.
| Identifier | ExFiles\Box 154a\4\ scan0083 | |
| Date | 26th August 1938 | |
| BT {Capt. J. S. Burt - Engineer} /MS. [Struck through] c. Rm. {William Robotham - Chief Engineer} ------- 1306 DA. {Bernard Day - Chassis Design} 1/G.26.8.38. BENTLEY 3, 50 and WRAITH 80. REAR SPRINGS. A.R.M. Please receive herewith the following scheme :- F.CD.852 Locating screw for threaded bushes. In order to obtain a definite stop for the threaded bushes pressed into position without knurling, we show a screw produced in S/N. with a .137 dia. end instead of the one at present used, which is produced in brass. It will be noticed that a locating screw has been added to the shackle bracket, a boss will therefore require adding to the forgings. Please instruct experimentally. DA. {Bernard Day - Chassis Design} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).