From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Modifications to the gearbox and cross member for a future car model.
| Identifier | WestWitteringFiles\R\January1928-March1928\ 108 | |
| Date | 6th March 1928 | |
| BY.{R.W. Bailey - Chief Engineer} FROM DA.{Bernard Day - Chassis Design} ORIGINAL C. to DJ. HS.{Lord Ernest Hives - Chair} DA{Bernard Day - Chassis Design}2/M6.3.28. INDIA 3. K5380 X5770 X5310 With reference to the long frame and 'X' shaped cross member which R.{Sir Henry Royce} instructs should be on the next 10,000 mile car, we have looked into the question of dismantling the gearbox without removing the unit from the frame, and have ascertained that this can be done with a slight modi-fication to the tubular cross member. We have indicated it on N. sch. 2560. herewith. It will be seen that we propose to remove the foot brake differential shaft, and that the box can then be drawn off, being slightly dipped as it passes below the cross member. If this dismounting is considered by any-body to be too difficult for any reason, we should be glad if they would let us know as soon as possible, but we are under the impression that it will be alright. It follows from this that the instructions sent you on N. schs. 2518/9/26/28. are alright subject to the slight alterations indicated on N. sch. 2560. We have yet to send you particulars of the petrol tank and rear of the car, definite instructions as to the suspension of the battery, and information as to the driving positions, which are the same as now except that the levers come in a slightly different position. DA.{Bernard Day - Chassis Design} [Handwritten on left margin in a circle]: 12 8 28 | ||