From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Listing blueprints for Dynamo components being sent to complete the machine.
| Identifier | ExFiles\Box 51\1\ Scan229 | |
| Date | 7th September 1923 | |
| X. 4383 To RHC. {R. H. Coverley - Production Engineer} C. EFC. {E. Fowler Clarke - Electrical Engineer} BY {R.W. Bailey - Chief Engineer} /Ds3/ML 7.9.23. X.4383 - DYNAMO. Further to our memo - BY {R.W. Bailey - Chief Engineer} /Ds1/ML5.9.23., we now send you herewith blueprints of the following parts to complete the machine. O D.51081.DC - Bearing Bracket (C.E). D.51082 - End Cover. D.51083 - End Cover Support. D.51084 - Adjusting Plate for Control Brush. D.51085 - Clamping Bolt for D.51084. O D.51087.DC - Brush Holder. L.H. O D.51088.DC - Brush Holder. R.H. O D.51089.DC - Brush Holder (Control). D.51090.- Securing Screw for Brush Holder (Short). D.51091 - Securing Screw for Brush Holder (Long). D.51092 - Insulating Washer. D.51093 - Brush Holder Insulation. D.51101 - Commutator Brush (Main). D.51102 - Commutator Brush (Control). D.51104 - Brush Spring. D.70177 - Brush Separator. D.51105 - L.O.P. (c) - 1 Print extra for Pattern Shop. We have instructed the O.O. to obtain the necessary Commutator Brushes in accordance with EFC {E. Fowler Clarke - Electrical Engineer} 's. instructions, the remainder of the parts called for on the L.O.P. are standard, except - D.70156 - Spring Spindle. D.70161 - Connector. D.70178 - Clamping Bolt. D.70179 - Clamping Washer. which have been issued to you on previous experiments. BY {R.W. Bailey - Chief Engineer} /Ds. | ||