From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Broken servo bushes on model 9.G.III and a proposal for a thicker replacement.
| Identifier | ExFiles\Box 105\4\ scan0034 | |
| Date | 9th December 1925 | |
| X5370 To Hs{Lord Ernest Hives - Chair} from RHC.{R. H. Coverley - Production Engineer} RHC{R. H. Coverley - Production Engineer}1/BE. 9.12.25. RE INDIA SERVOS When Servo on 9.G.III was dismantled it was found that bushes for Pressure Plate dowels were broken away. In one case there was no bush left. Section of these bushes are very thin being .031 - Forging would allow for a much thicker bush. It could be increased to .062 section. Do you consider this alteration should be carried out? RHC.{R. H. Coverley - Production Engineer} | ||