From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification sheet detailing the interior and exterior fittings for a vehicle body.
| Identifier | ExFiles\Box 84\3\ scan0030 | |
| Date | 17th July 1936 guessed | |
| -4- Interior Woodwork. Wood to choice. Solid type finishers to doors and quarter lights not using concealed fixings. Base of finishers to line up with screen capping. Visors and Mirror. Two interior sun visors of standard pattern, and also an interior mirror as fitted to our standard body. Scuttle Rail Light. A flush fitting lamp to be fitted on the under side of the scuttle rail, for map reading, with an integral switch. Carpet - To choice. Scuttle Ventilator. The top scuttle ventilator opening forward with tray and drains. Head Lamps. Lucas P.100 with dip and switch reflectors, supplied by Rolls-Royce. Fog Lamp. Supplied and fitted by Rolls-Royce. Wing Lamps. Special design supplied by Rolls-Royce as fitted to Phantom III. Outside Handles. - As fitted as standard to standard Saloon. Tools. - All tools to be housed in the rear luggage compartment. Pockets. - Slash pockets on front doors and rear doors. Roomy gusseted pocket on inside of scuttle at the near side with Zipp fastener. Bumpers. - Front bumpers as supplied with chassis. Rear bumper as shown on Lec.5116. This is a complete bumper. Finishing and Mounting Instructions - to follow. Anti-Noise Treatment of Body. - Dashboard and scuttle to be treated with Seapak noise insulation according to our standard scheme. | ||