From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Particulars of the 'Ripplet Frame' assembly drawing RF.158.
| Identifier | ExFiles\Box 118\1\ scan0026 | |
| Date | 11th January 1940 | |
| To HPS.{Horace Percy Smith - Experimental Factory Mgr} c. to HPS{Horace Percy Smith - Experimental Factory Mgr}/RH.{R. Hollingworth} Rm{William Robotham - Chief Engineer}/CTS.{C. Trot Salt - Carburation}8/JH.11.1.40. RIPPLET FRAME. FRAMES & FITTINGS - Sec. 7000. We send you herewith four prints of the following :- RF.158 Frame assembly. This drawing gives particulars of the drilling for the following items :- (1) Rear Bumper. (2) Rear spring - Aft. shackle bracket. (3) Flexible lubrication pipe to aft shackle bracket. (4) Rear brake equaliser. (5) Wiring junction box. (6) Gearbox near suspension. (7) Hydraulic master cylinder. (8) Starter main switch. (9) Pedals. (10) Torque arm bearing. NOTE. This drawing is not complete. Further information will be added when available. Rm{William Robotham - Chief Engineer}/CTS.{C. Trot Salt - Carburation} | ||