Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Letter from High Duty Alloys Ltd. enclosing a summary of discussions about the manufacture of A.C.9 Bearing Alloy.

Identifier  ExFiles\Box 116\2\  scan0116
Date  26th November 1938
  
1020a

HIGH DUTY ALLOYS LTD.

TELEPHONE: SLOUGH 21201 (PRIVATE BRANCH EXCHANGE)
TELEGRAMS: ALLOYS, SLOUGH.

DIRECTORS:
W.C.DEVEREUX, F.R.Ae.S.,(Managing)
DUNCAN McKELLAR.

Our Ref JTR/WP. Your Ref Rm{William Robotham - Chief Engineer}4/R.{Sir Henry Royce}
Technical

BUCKINGHAM AVENUE,
TRADING ESTATE,
SLOUGH,
BUCKS.

26th November, 1938.

Messrs. Rolls Royce Limited,
Nightingale Road,
Derby.

Dear Sirs,

For the attention of W.M Robotham, Esq.,

We beg to acknowledge and thank you for your letter of the 25th, and enclosed summary of the discussions held at Derby, with reference to the manufacture of A.C.9. Bearing Alloy.

This summary furnishes very interesting data, and we hope that by means of same, the position relative to the bearing alloy will be put on a much sounder basis.

If there are any outstanding points upon which we are in doubt, we will communicate with you in the course of a few days.

Yours faithfully,
For and on behalf of
HIGH DUTY ALLOYS LTD.,

Jower Hobman.
Technical Superintendent.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙