Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Distribution Board and Cutout for a 40-50 HP Chassis No. 23-EX, detailing required modifications and parts.

Identifier  ExFiles\Box 163\6\  img021
Date  17th March 1930
  
X.6016
RHC.{R. H. Coverley - Production Engineer}
EFC.
BY/RD2/W.17-3-30.
X7740
X.6016
Re :- 40-50 H.P.Chassis No.23-EX.
Distribution Boad and Cutout.
Section 8170 : 'D' Scheme 315.
---------------------------------------------
Will you please put in hand one Distribution Board and Cutout with additional Connections for the half charge scheme, and we send you herewith the following Blue Prints :-
D72627 Distribution Board Base - 1 off.
D72628 Terminal, dynamo field - 1 off.
D72629 Clip, field fuse. - 1 off.
D72632 Coil for cutout. - 1 off.
These represent nearly all standard pieces slightly modified. The Base can be made from a standard production piece by slight machining and the addition of D72628 Terminal.
The Coil for cutout is quite the standard coil but with one Lead left a little longer.
Will you please put this in hand as quickly as possible and we will cover these parts with an L.O.P., as soon as it is ready.
We suggest for the time being, the diagram in the distribution board lid{A. J. Lidsey} should be omitted.
BY/RD.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙