From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Arrangement of the Enots-Bijur centralised chassis lubrication system on the rear axle.
| Identifier | ExFiles\Box 26\5\ Scan138 | |
| Date | 16th May 1928 | |
| BY.{R.W. Bailey - Chief Engineer} from DA.{Bernard Day - Chassis Design} c. to BJ. Hs.{Lord Ernest Hives - Chair} X3806 DA{Bernard Day - Chassis Design}2/M16.5.28. CENTRALISED CHASSIS LUBRICATION - X.7350 REAR AXLE. X.3806 Herewith we send N.sch.2602 - arrangement of the Enots-Bijur lubrication on the back axle. The main universal joint is still to be in what remains of the Bijur system. The serrated joint and ball bearing and torque tube, and the brake camshafts, are filled at long intervals from the Enots nipple on the torque tube. The spring pads have been dealt with by taking them out of the lubrication system altogether. We have endeavoured to simplify the piping by removing some of the banjos and junctions. It may be found possible to dispense with the junction in front of the rear torque tube flange. When the axle is dismounted the whole piping system comes off in one unit. DA.{Bernard Day - Chassis Design} | ||