From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Secret memo discussing potential modifications to the EAC.1 and 2 steering column to make steering easier.
| Identifier | ExFiles\Box 72\3\ scan0285 | |
| Date | 1st January 1924 | |
| To RG.{Mr Rowledge} E.{Mr Elliott - Chief Engineer} & DA.{Bernard Day - Chassis Design} from R.{Sir Henry Royce} c. to CJ. BJ. Wor.{Arthur Wormald - General Works Manager} HS.{Lord Ernest Hives - Chair} BY.{R.W. Bailey - Chief Engineer} EP.{G. Eric Platford - Chief Quality Engineer} X.9430 S E C R E T. EAC-1. 2 & 3. R4/M1.1.24. STEERING - X.9430 I omitted to mention that if the new EAC.1 and 2. steering column is adopted some modification seems necessary to make the steering easier. (1) We could reduce the speed of the steering to that of our earlier suggestion, but still keeping it somewhat quicker than the hispano. (2) We could fit ball or roller bearings each side where the heavy loads from the worm create friction on the pendulum lever shaft. (3) We might find out if the nut really gives a large bearing area on the worm. Mr. hardy and I spent a long time on this design and it ought to be superior to the one we have had in use so long, in robustness, and oil retaining; it is surprising that it shews more friction but in some ways we should have preferred this as it is slightly less reversible which has often been desired. Suggestion (1) above will also make it more irreversible but the steering less heavy. R.{Sir Henry Royce} | ||