From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Loose square-headed bolt on the rear axle bridge piece.
| Identifier | ExFiles\Box 82\5\ scan0130 | |
| Date | 19th May 1937 | |
| Rm{William Robotham - Chief Engineer}/GWH{George W. Hancock - Head Chateauroux}/HFH.{Hoppy F. Hamilton} 200a Rm{William Robotham - Chief Engineer}/Gry{Shadwell Grylls}7/R.19.5.37. 3.B.IV. REAR AXLE. With regard to your memo saying that one of the square headed bolts securing the bridge piece is loose, these bolts are rivetted over on the inside. Unless this operation has been left out there should be no danger of the nut coming off and getting into the axle gears. Before such a thing could happen you would be able to pull the bolt out a few threads. Rm{William Robotham - Chief Engineer}/Gry{Shadwell Grylls}, | ||