Rolls-Royce Archives
| Identifier | Entry | ||
| img001 | Standardisation document regarding the addition of friction to steering pivots to improve steering. | ||
| View original record | R R 745 (S H) (S H 268, 20-2-20) G 2184 GOSHAWK COMPLETED 16.11.22. STANDARDISATION of CHASSIS PARTS. ORIGINAL. Description of Parts. ADDITIONAL FRICTION TO STEERING PIVOTS. Origin. In order to… | ||
| img002 | Standardisation report on bevelling the scraper piston ring to address over-oiling and smoking on Goshawk cars. | ||
| View original record | GOSHAWK COMPLETED 24.11.22. STANDARDISATION of CHASSIS PARTS. Date 15.11.22 X No. 4324 Description of Parts. ORIGINAL. BEVEL ON SCRAPER PISTON RING. Origin. To overcome over-oiling and smoking.… | ||
| img003 | The standardisation of a side steering tube to increase movement and overcome shocks in the steering wheel. | ||
| View original record | R. R. 784 (5 M) (S.J. 29), 11-10-21 G. 3087. GOSHAWK. SHAW. COMPLETED 24.11.22. STANDARDISATION OF CHASSIS PARTS. ORIGINAL Description of Parts. SIDE STEERING TUBE - increased movement in the spring… | ||
| img004 | Increased movement in the side steering tube's spring control joint and the scrap value for the modification. | ||
| View original record | X4265 To Hs. from My/JW. My/JW3/139A/M16.1.23. X.4265 - SIDE STEERING TUBE - increased movement in the spring control joint in the side steering tube. We return herewith copy of above Standardisation… | ||
| img005 | Standardisation report for a side steering tube, detailing an alteration to reduce steering wheel shocks. | ||
| View original record | R R 746 (S H) (S H 268, 29-9-20) G 2764 GOSHAWK STANDARDISATION of CHASSIS PARTS. Description of Parts. SIDE STEERING TUBE - increased movement in the spring control joint in the side steering tube.… | ||
| img006 | Standardisation of chassis parts for radiator shutters. | ||
| View original record | R.R. 73d (5 H) (S.J. 291) 19-10-21. G. 3057. GOSHAWK. HAWK COMPLETED 24.11.22. STANDARDISATION of CHASSIS PARTS. Description of Parts. RADIATOR SHUTTERS. ORIGINAL Origin. In order to control… | ||
| img007 | Standardisation form for radiator shutters used to control water temperature. | ||
| View original record | R R 75A (S H) (S H 263. 19-9-20) G 8954 GOSHAWK STANDARDISATION of CHASSIS PARTS. Description of Parts. RADIATOR SHUTTERS. Origin. In order to control temperature of water. Experimental Test Report.… | ||
| img008 | Works cost and estimate inclusion for radiator shutters on a 20 HP chassis. | ||
| View original record | Hs. My/JW/N1/139/B.9.1.23. ORIGINAL - : re Standardisation Sheet No.4240 :- Radiator Shutters for 20 H.P. ..................Chassis............ We return herewith above Standardisation Sheet with the… | ||
| img009 | Standardisation of a brake for the generator drive to overcome slight rattles. | ||
| View original record | R.R. 782 (5 H) (S.J. #91, 12-10-21). G. 2087. GOSHAWK COMPLETED 29.11.22. STANDARDISATION of CHASSIS PARTS. Description of Parts. BRAKE FOR GENERATOR DRIVE. ORIGINAL Origin. To overcome slight… | ||
| img010 | The cost of scrap that a modification to the generator drive brake would create. | ||
| View original record | COPY. To Hs. from My/JW. My/JW/N1/139A/M24.11.22. X.3522 - BRAKE FOR GENERATOR DRIVE. As requested:- We return herewith copy of above Standardisation Sheet, with Costs filled in. If this modification… | ||
| img011 | Standardisation of fixed bushes for Goshawk chassis spring eyes to prevent wear. | ||
| View original record | R.R. 756 (5 B) (S.J. 291, 1k-10-21) G. 3057. STAMP: COMPLETED 8.1.23. STANDARDISATION of CHASSIS PARTS. Date: 8.12.22 Drawing No: X No.4261 Description of Parts: GOSHAWK. FIXED BUSHES FOR SPRING EYES.… | ||
| img012 | Awaited cost for a standardisation sheet on fixed bushes for spring eyes. | ||
| View original record | 9.1.23. STANDARDISATION SHEET. FIXED BUSHES FOR SPRING EYES. X.4261. We are still awaiting the cost in connection with the above. We will forward this as soon as it comes to hand. Hs. | ||
| img013 | Standardisation of a luggage grid for the 20 HP Goshawk chassis. | ||
| View original record | R R 755 (5 H) (S.H. 187, 20-8-20) G. 2507. GOSHAWK COMPLETED 10.1.23. STANDARDISATION of CHASSIS PARTS. Description of Parts. 20 HP. CHASSIS. LUGGAGE GRID. ORIGINAL. Origin. Experimental Test Report.… | ||
| img014 | The cost of a Luggage Grid for the 20 HP Chassis. | ||
| View original record | To Hs from My/JW. X 3524 My/JW/N1/139A/B.8.1.23. -: re Standardisation Sheet No.3524 :- Luggage Grid. 20 H.P.Chassis.... ........................ We return herewith above noted statdardisation, with… | ||
| img015 | Standardisation of ground gears in place of helical gears in the gearbox to improve silence. | ||
| View original record | R R 765 (S H) (S R 268. 19-9-21) G 2954 COMPLETED 6.3.23. STANDARDISATION of CHASSIS PARTS. Date 26.2.23. X No. 4543 Drawing No. Part List Description of Parts. Ground gears in place of helical for… | ||
| img016 | Standardisation of ground gears to replace helical gears for the gearbox. | ||
| View original record | COPY. Hs. My/JW/N1/139a/M28.2.23. STANDARDISATION OF CHASSIS PARTS. GROUND GEARS IN PLACE OF HELICAL, FOR CONTINUOUS GEARS IN GEAR BOX. Please receive herewith Std. Sheet X.4543, with costs filled in.… | ||
| img017 | Standardisation of chassis parts, replacing helical gears with ground gears in the gearbox to improve silence. | ||
| View original record | R R 755 (S H) (S.H. 187, 20-8-20) G. 3807. STANDARDISATION of CHASSIS PARTS. COMPLETED 6.3.23. Date 26.2.23. X No. 4543 Description of Parts. Ground Gears in place of Helical for continuous gears in… | ||
| img018 | The standardisation of chassis parts, replacing helical gears with ground gears in the gearbox. | ||
| View original record | Hs. My/JW/N1/139A/M28.2.23. STANDARDISATION OF CHASSIS PARTS. GROUND GEARS IN PLACE OF HELICAL, FOR CONTINUOUS GEARS IN GEAR BOX. Please receive herewith Standardisation Sheet X No.4543, with Costs… | ||
| img019 | Standardisation document for an adjusting screw for cross steering rod ball joints. | ||
| View original record | R R 755 (5 H) (S H 958. 29-9-20) G 2944 ORIGINAL COMPLETED 8. 3. 23. STANDARDISATION of CHASSIS PARTS. Date 28. 2. 23. X No4263 Description of Parts. ADJUSTING SCREW FOR CROSS STEERING ROD BALL… | ||
| img020 | Costs for the standardization of an adjusting screw for a cross steering rod ball joint. | ||
| View original record | C O P Y To hs. from My/JW. My/JW/N1/139A/MS.3.23. X.4263 - ADJUSTING SCREW FOR CROSS STEERING ROD BALL JOINT. Receive herewith standardisation sheet with costs filled in. The old part has been ordered… | ||
| img021 | Standardisation of an adjusting screw for cross steering rod ball joints. | ||
| View original record | R R 746 (S H) (S H 258, 29-9-20) G 8964 COMPLETED 8.3.23. STANDARDISATION of CHASSIS PARTS. Date 28.2.23. Description of Parts. Re Canadel. Drawing No. X No.4263 ADJUSTING SCREW FOR CROSS STEERING ROD… | ||
| img022 | The costs and value of an adjusting screw for a crossing steering rod ball joint. | ||
| View original record | COPY To Hs. from My/JW. My/JW/N1/139A/M3.3.23. X.4263 - ADJUSTING SCREW FOR CROSSING STEERING ROD BALL JOINT. Receive herewith standardisation sheet with costs filled in. The old part has been ordered… | ||
| img023 | Standardisation of a low speed jet spindle and cone to prevent whistling noise and for strengthening. | ||
| View original record | R R 746 (5 H) (S H 268, 20-9-20) G 9564 COMPLETED 8.3.23. STANDARDISATION of CHASSIS PARTS. Date 28.2.23. Description of Parts. LOW SPEED JET SPINDLE AND CONE. Origin. To prevent whistling noise and… | ||
| img024 | Value of work for a low-speed jet spindle and cone. | ||
| View original record | To Hs. from Hy/JW. Hy/JW/N2/139a/M5.3.23. X.4228 - LOW SPEED JET SPINDLE AND CONE. Receive herewith standardisation sheet with Cost filled in. The old part has been ordered up to 500 sets. We are not… | ||
| img025 | Standardisation of the low-speed jet spindle and cone to prevent whistling noise and for strengthening. | ||
| View original record | R R 760 (6 H) (S H 268, 19-9-20) G 2454 COMPLETE 8.3.23 STANDARDISATION of CHASSIS PARTS. Date 28.2.23. X No. 4228 Description of Parts. LOW SPEED JET SPINDLE AND CONE. Handwritten: R, Re Canadell… | ||
| img026 | Standardisation sheet and cost value for part X.4228, the Low Speed Jet Spindle and Cone. | ||
| View original record | To Hs. from My/JW. My/JW/N2/139a/M5.3.23. X.4228 - LOW SPEED JET SPINDLE AND CONE. Receive herewith standardisation sheet with Cost filled in. The old part has been ordered up to 500 sets. We are not… | ||
| img027 | Modification to the 20 HP hand brake lever to prevent rattles. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS. Description of Parts. 20 HP. MODIFICATION TO HAND BRAKE LEVER. Origin. To prevent rattles. Experimental Test Report. The original brake levers fitted to the 20 HP.… | ||
| img028 | Modification to the 20 HP Rear Axle Casing to improve strength. | ||
| View original record | R R 755 (6 H) (S R 268, 19-9-21) G 2434 COMPLETED 28.3.23. STANDARDISATION OF CHASSIS PARTS. Description of Parts. ORIGINAL Modification to 20 HP. Rear Axle Casing. Origin. To improve the strength.… | ||
| img029 | Standardisation of Chassis Parts: Sharp corners on radiator tank in place of radius. | ||
| View original record | R R 746 (5 H) (S H 258, 19-9-20) G 2554 COMPLETED 31.3.23. STANDARDISATION of CHASSIS PARTS. Date 21.3.23 X No. 3456 Description of Parts. SHARP CORNERS ON RADIATOR TANK IN PLACE OF RADIUS. Origin. To… | ||
| img030 | Standardisation of a spring tension system for fan belt adjustment. | ||
| View original record | COMPLETED 13.4.23. STANDARDISATION of CHASSIS PARTS. Date 26.2.23 Drawing No. X No.4237 Description of Parts. SPRING TENSION FOR FAN BELT ADJUSTMENT. Origin. To ensure fan belt is always at the… | ||
| img031 | Production and cost implications for a new spring tension fan belt adjustment. | ||
| View original record | C O P Y. To Hs. from MY/JW. MY/JW/N1/139A/M6.3.23. X.4237 - SPRING TENSION FOR FAN BELT ADJUSTMENT. Receive herewith standardisation sheet as above with Cost filled in. The old parts have been ordered… | ||
| img032 | Standardisation of chassis parts, specifically road springs made by Firths to replace those by Woodheads for the 40/50 and Goshawk models. | ||
| View original record | R R 755 (S H) (S.H. 157, 20-8-20) G. 2807. ORIGINAL COMPLETED 24.4.23. STANDARDISATION of CHASSIS PARTS. Date 29.12.22 X No. 4419 Description of Parts. 40/50 and GOSHAWK. ROAD SPRINGS MADE BY FIRTHS… | ||
| img033 | Standardisation sheet for road springs, discussing a supplier change and cost implications. | ||
| View original record | Hs. from My/JW. My/JW/N3/139/B 8.1.23. RE. STANDARDISATION SHEET X.4419. ROAD SPRINGS MADE BY FIRTHS IN PLACE OF WOODHEADS. We return herewith copy of above standardisation sheet, but regret to say… | ||
| img034 | Standardisation proposal for coarser pitch rear axle gears to enable quieter production. | ||
| View original record | R.R. 785 (5 H) (S.J. 99), 10-10-21. G. 3057. ORIGINAL COMPLETED 20.6.23 STANDARDISATION OF CHASSIS PARTS. Date 23.5.23 X No.4424 Drawing No. Part List Description of Parts. COARSER PITCH REAR AXLE… | ||
| img035 | Estimated cost savings of using coarser pitch rear axle gears on the 20-HP chassis. | ||
| View original record | To Hs. from My/JW. RE - STANDARDISATION SHEET NO.4424, COARSER PITCH REAR AXLE GEARS - 20-HP. CHASSIS. We return herewith above-noted Standardisation Sheet from which it will be seen we estimate a… | ||
| img036 | Standardisation of chassis parts, regarding rear shock absorbers with increased friction. | ||
| View original record | STANDARDISATION of CHASSIS PARTS. COMPLETED 27.6.23. Date 14.6.23. Drawing No. X No. 4329 Description of Parts. REAR SHOCK ABSORBERS - INCREASED FRICTION. Origin. To improve the riding of the car.… | ||
| img037 | Standardisation proposal for an improved spring drive on a chassis. | ||
| View original record | R.R. 755 (S H) (S.J. 29). 15-10-21. G. 3057. COMPLETED 10.7.23 STANDARDISATION of CHASSIS PARTS. Date 22.6.23 X No. 4222 Drawing No. Part List Description of Parts. IMPROVED SPRING DRIVE. Origin.… | ||
| img038 | Standardisation of an undershield chassis part to assist in cooling floor-boards. | ||
| View original record | R.R. 755 (10M) (SL 72 18-7-23) MP 274954z. COMPLETED 31.8.23. STANDARDISATION of CHASSIS PARTS. Date 16.8.23. Description of Parts. UNDERSHIELD. ORIGINAL X No. 4272 Drawing No. Part List Origin: To… | ||
| img039 | Standardisation of lagging the exhaust pipe with asbestos to reduce heat under the scuttle. | ||
| View original record | R.R. 755 (10M) (SL 72 18-7-23) MP 274954e. COMPLETED 31.8.23. STANDARDISATION of CHASSIS PARTS. Date 16.8.23. Description of Parts. Exhaust Pipe lagged with asbestos. ORIGINAL Origin To reduce heat… | ||
| img040 | Standardisation of 45° angle valve seats to avoid valves burning on 20 HP cars. | ||
| View original record | R.R. 755 (10M) (SL 72 18-7-23) MP 274954s. COMPLETED 14.9.23. STANDARDISATION of CHASSIS PARTS. Date 1.9.23. Description of Parts: 45° angle seats [STAMPED: ORIGINAL] Origin: To avoid valves burning.… | ||
| img041 | Standardisation of chassis parts concerning a modification to the Hand Brake Lever. | ||
| View original record | COMPLETED 30.10.23. STANDARDISATION of CHASSIS PARTS. Date 4.10.23. X No. 4253 Drawing No. Part List Description of Parts: HAND BRAKE LEVER. Origin: To make lever more accessible and to give front… | ||
| img042 | Standardisation Sheet for a Hand Brake Lever and the material surplus from its modification. | ||
| View original record | To Hs. - from My/JW. My/JW/N1/139A/M26-10-23. X.NO.4253 - HAND BRAKE LEVER. Receive herewith the above Standardisation Sheet with Costs filled in. Should this modification be brought in on the 751st… | ||
| img043 | Standardisation of chassis parts concerning the petrol tank filler cap to prevent it from being lost. | ||
| View original record | R.R. 755 (10M) (SL 72 18-7-23) MP 274954s. COMPLETED 6.11.23. STANDARDISATION of CHASSIS PARTS. Date 25.10.23 Description of Parts. PETROL TANK FILLER CAP. Origin: To prevent cap being lost.… | ||
| img044 | Standardisation of a camshaft modification to increase power. | ||
| View original record | R.R. 755 (10M) (SL 72 18-7-23) MP 274954a. COMPLETED 6.11.23. STANDARDISATION of CHASSIS PARTS. Date 4.10.23. X No. 4229 Drawing No. Part List Description of Parts. CAMSHAFT. Origin: To increase… | ||
| img045 | 20 HP Camshaft, the return of its standard sheet, and the valuation of existing stock. | ||
| View original record | MY/JW. To Hs. C O P Y. MY/JW/N8/139A/M8.10.23. X.4229 - CAMSHAFT - 20 HP. We return herewith Std. Sheet as above. We now have Camshafts going through the Works, a quantity of which are past the Cam… | ||
| img046 | Standardisation of chassis parts, specifically adding friction dampers to the engine mounting to reduce vibration. | ||
| View original record | R.R. 755 (10M) (SL 72 18-7-23) MP 274954s. COMPLETED 7.11.23. STANDARDISATION of CHASSIS PARTS. Date 3.10.23. Description of Parts. FRICTION DAMPERS TO ENGINE MOUNTING. Origin: To reduce vibrations.… | ||
| img047 | Standardisation proposal for a new petrol level indicator to improve appearance and visibility. | ||
| View original record | R.R. 755 (10M) (SL 72 18-7-23) MP 274954s. COMPLETED - 24.11.23. STANDARDISATION of CHASSIS PARTS. Date 30.10.23 Description of Parts. PETROL LEVEL INDICATOR. X No. 3596 Drawing No. Part List Origin:… | ||
| img048 | Standardisation proposal for shorter instrument board brackets to improve coachwork. | ||
| View original record | R.R. 752 (10M) (SL 72 18-7-23) MP 274954a. COMPLETED 8.12.23. STANDARDISATION of CHASSIS PARTS. Date 17.11.23. No. 4067 Description of Parts: SHORTER INSTRUMENT BOARD BRACKETS. Origin: To improve… | ||
| img049 | Standardisation report for Dunlop Artillery Steel Wheels as an alternative to wire wheels. | ||
| View original record | R.R. 755 (5 H) (S.J. 391. 1x-10-21. G. 5057. COMPLETED 2.1.24. STANDARDISATION of CHASSIS PARTS. Description of Parts. ORIGINAL DUNLOP ARTILLERY STEEL WHEELS. Origin. As an alternative to the wire… | ||
| img050 | Offering Dunlop steel artillery wheels as an alternative when a customer refuses wire wheels. | ||
| View original record | BY. from Hs. Wor. RG. DA. EP. PN. Hs/LG22.6.23. DUNLOP STEEL ARTILLERY WHEELS. With reference to the attached standardisation sheet. It is not intended to standardise the Artillery steel wheels but… | ||
| img051 | Dunlop Artillery Steel Wheels and Standardisation Sheet No. 4586. | ||
| View original record | S/W Hs C2/C2.1.24. Re Dunlop Artillery Steel Wheels. ---------- I attach hereto Standardisation Sheet No.4586 in duplicate, duly signed by CJ. and BJ. CJ. will take the matter up with R. later.… | ||
| img052 | Standardisation proposal for a reduced diameter swan neck exhaust pipe to reduce noise. | ||
| View original record | R.R. 755 (10M) (SL 72 18-7-23) MP 274954s. COMPLETED 10.1.24. STANDARDISATION of CHASSIS PARTS. Date 21.12.23. No. 4238 Description of Parts: REDUCED DIAMETER SWAN NECK EXHAUST PIPE. Origin: To reduce… | ||
| img053 | Standardisation of the chassis Undershield to make it easier to take down. | ||
| View original record | STANDARDISATION of CHASSIS PARTS. Date 15.1.24. Description of Parts. UNDERSHIELD. Origin: To make Undershield easier to take down. No. 4272 Drawing No. Part List Experimental Test Report. At present… | ||
| img054 | Material value for the standardisation of a chassis undershield, part X.No.4272. | ||
| View original record | Hs. My/JW/N1/139A/M18-1-24. Standardisation of Chassis Parts. X.No.4272 - Undershield. We return herewith copy of the above, with Costs filled in. Please note, the value of material this alteration… | ||
| img055 | Standardisation of friction discs for the slipper wheel, proposing a change from fibre to bakelized linen. | ||
| View original record | R.R. 755 (10M) (SL 72 18-7-23) MP 274954a. ORIGINAL COMPLETED 4.3.24. STANDARDISATION of CHASSIS PARTS. Date 21.1.24. Description of Parts. FRICTION DISCS FOR SLIPPER WHEEL. X No. 4244 Drawing No.… | ||
| img056 | Finding a suitable friction material for slipper flywheels on 20 HP cars. | ||
| View original record | COPY. Experimental Report. To H. from Hs. c. to CJ. Rg. E. DA. BY. FRICTION MATERIAL FOR SLIPPER FLYWHEELS. There has been trouble with some of the slipper wheels on 20 HP. cars not performing… | ||
| img057 | Standardisation proposal for a stay for the exhaust pipe to prevent vibration. | ||
| View original record | RR 755 (10H) (SL391 2-11-23) MP 281297 COMPLETED 22.5.24. STANDARDISATION of CHASSIS PARTS. Date 15.4.24. Description of Parts. STAY FOR EXHAUST PIPE. Box ticked X No. 4238 Drawing No. Part List… | ||
| img058 | Standardisation proposal for a carburetter air inlet to reduce noise. | ||
| View original record | RR 755 (10M) (SL391 2-11-23) MP 281297 COMPLETED 22.5.24. STANDARDISATION of CHASSIS PARTS. Date 29.4.24 X No. 4228 Drawing No. Part List Description of Parts. CARBURETTER AIR INLET. Origin. To reduce… | ||
| img059 | Modified air inlet for a 20 HP car, detailing noise issues and providing a horsepower comparison with the standard part. | ||
| View original record | R.R. 493a (20H) (D.A. 652 20-3-24) J.E.D. EXPERIMENTAL REPORT Expl. No. REF. Hs/TMW/LG29.4.14. MODIFIED AIR INLET - 20 HP CAR. We recommend that Air Inlet No. E.53197 be made standard. At present,… | ||
| img060 | Standardisation of Chassis Parts regarding K.L.G. Sparking Plugs. | ||
| View original record | RR 755 (10M) (SL391 2-11-23) MP 281297 ORIGINAL COMPLETED 29.5.24. STANDARDISATION of CHASSIS PARTS. Date 20.5.24. Description of Parts. K.L.G. SPARKING PLUGS. No. 1918 Drawing No. Part List Origin.… | ||
| img061 | Standardisation of frame tie rods to increase stiffness of the frame. | ||
| View original record | RR 755 (10M) (SL391 2-11-23) MP 281297 COMPLETED 7.7.24. STANDARDISATION of CHASSIS PARTS. Date 26.6.24. Description of Parts. FRAME TIE RODS. Origin. To increase stiffness of Frame. [X] No. 4260… | ||
| img062 | Standardisation proposal for an improved luggage grid design. | ||
| View original record | RR 755 (10M) (SL391 2-11-23) MP 261297 COMPLETED 8.7.24. STANDARDISATION of CHASSIS PARTS. Date 11.6.24 Description of Parts. LUGGAGE GRID. X No. 3524 Drawing No. Part List Origin. Improvement in… | ||
| img063 | Standardisation of the 20 HP luggage grid, returning a costed standard sheet X.3524. | ||
| View original record | C O P Y. To Hs. from My/Rms. My/Rms6/N/139A/BJ24.6.24. STANDARDISATION OF 20 HP. LUGGAGE GRID. X.3524 Returned herewith std. sheet X.3524 with cost filled in. Please note that in both costs we have… | ||
| img064 | Standardisation test report for a new radiator and shutter design intended to improve appearance. | ||
| View original record | RR 755 (10H) (SL391 2-11-23) MP 281297 COMPLETED 12.7.24. STANDARDISATION of CHASSIS PARTS. Date 7.4.24. X No. 4240 Drawing No. Part List Description of Parts: RADIATOR & SHUTTER. Origin: To improve… | ||
| img065 | Standardisation of chassis parts, specifically the lubricator on the rear universal joint. | ||
| View original record | RR 755 (10M) (SL391 2-11-23) MP 281297 ORIGINAL COMPLETED 14.10.24. STANDARDISATION of CHASSIS PARTS. Date 10.9.24. Description of Parts. LUBRICATOR ON REAR UNIVERSAL JOINT. Origin. To avoid… | ||
| img066 | The altered position of a 20 HP rear universal joint lubricator. | ||
| View original record | Hs/T.W./LG11.9.24. ALTERED POSITION OF 20 HP. REAR UNIVERSAL JOINT LUBRICATOR. N.sch.1456, in conjunction with modified Battery Box to Drg. F.53198. N.sch.1456 was originally fitted to 6-G-11 and has… | ||
| img067 | Standardisation of chassis parts for side steering tube joint lubrication. | ||
| View original record | RR 755 (10H) (SL391 2-11-23) MP 281297 COMPLETED 5.11.24. STANDARDISATION of CHASSIS PARTS. Description of Parts. SIDE STEERING TUBE JOINT LUBRICATION. Origin. To improve lubrication. Experimental… | ||
| img068 | Standardisation report on the use of copper tubes in place of steel for the cylinder and cylinder head. | ||
| View original record | RR 755 (10M) (SL391 2-11-23) MP 281297 ORIGINAL COMPLETED 22.7.25. STANDARDISATION of CHASSIS PARTS. Date 14.7.25. X No. 5050 Drawing No. Part List Description of Parts. TUBES IN CYLINDER & CYLINDER… | ||
| img069 | Standardisation of chassis parts for a 20 HP chassis with 4-wheel brakes and a 4-speed gearbox. | ||
| View original record | RR 755 (10H) (SL391 2-11-23) MP 281297 ORIGINAL COMPLETED 15.9.25. STANDARDISATION of CHASSIS PARTS. Date 10.8.25. Drawing No. 5770 Description of Parts: 20 HP. CHASSIS FITTED WITH 4-WHEEL BRAKES -… | ||
| img070 | Standardisation of chassis parts for a 20 HP car with 4-wheel brakes and 4-speed gearbox. | ||
| View original record | ORIGINAL RR 756 (10M) (SL391 2-11-23) MP 281297 STANDARDISATION of CHASSIS PARTS. Description of Parts. 20 HP. CHASSIS FITTED WITH: 4-WHEEL BRAKES - 4-SPEED GEARBOX. Origin. To improve design.… | ||
| img071 | Standardisation report for an improved catch on the magneto drive to make it easier to operate. | ||
| View original record | RR 755 (10M) (SL.391 2-11-23) MP 281297 ORIGINAL COMPLETED 16.10.25. STANDARDISATION of CHASSIS PARTS. Date 8.10.25. Description of Parts. IMPROVED CATCH ON MAGNETO DRIVE. Origin. To make it easier to… | ||
| img072 | Standardisation of chassis parts report for a lock plate on the exhaust pipe nut. | ||
| View original record | RR 755 (10H) (SL391 2-11-23) MP 281297 ORIGINAL COMPLETED 17.10.25. STANDARDISATION of CHASSIS PARTS. Date 8.10.25. Description of Parts. LOCK PLATE FOR NUT ON EXHAUST PIPE. Origin. To prevent nut… | ||
| img073 | Standardisation of chassis parts, specifically dampers for brake drums. | ||
| View original record | RR 755 (10M) (SL391 2-11-23) MP 281297 ORIGINAL COMPLETED 30.10.25. STANDARDISATION of CHASSIS PARTS. Date 14.10.25. No. 4257 Description of Parts. DAMPERS FOR BRAKE DRUMS. Origin. To reduce… | ||
| img074 | Returning standardisation sheet X.No.4257 with the cost of supplying and fitting parts to an existing chassis. | ||
| View original record | To Hs from My/Rns. MY/Pns33/N/139/BJ.21.10.25. Standardisation of Chassis Parts Sheet X.No.4257 Returned herewith standardisation sheet X.No.4257 with cost filled in. Please note the figure of £3-5-0… | ||
| img075 | Standardisation of the thrust race for the rear axle bevel pinion. | ||
| View original record | RR 755 (10M) (SL391 2-11-23) MP 281297 ORIGINAL COMPLETED 30.10.25. STANDARDISATION of CHASSIS PARTS. Date 14.10.25. X No. 5350 Drawing No. Part List Description of Parts. THRUST RACE FOR REAR AXLE… | ||
| img076 | Standardisation of Chassis Parts - Slipper Wheels fitted with Dowel Pegs. | ||
| View original record | RR 755 (10M) (DB130 12-9-24) MS 301225 ORIGINAL. COMPLETED 23.12.25 STANDARDISATION of CHASSIS PARTS. Date 10.12.25 Description of Parts: SLIPPER WHEELS FITTED WITH DOWEL PEGS. Origin: To improve… | ||
| img077 | Standardisation of chassis parts for modified dust covers for front brakes. | ||
| View original record | RR 755 (10H) (DB130 12-9-24) MS 301225 ORIGINAL COMPLETED 8.3.26. STANDARDISATION of CHASSIS PARTS. Date 20.2.26 Description of Parts: MODIFIED DUST COVERS FOR FRONT BRAKES. X No. 5940 / 2428 Drawing… | ||
| img078 | Standardisation proposal for the deletion of the window in the float chamber to prevent leaks. | ||
| View original record | RR 755 (10M) (DB130 12-9-24) MS 301225 ORIGINAL COMPLETED. 16.3.26. STANDARDISATION of CHASSIS PARTS. Date 5326 X No. 5080 Drawing No. Part List Description of Parts: DELETION OF WINDOW IN FLOAT… | ||
| img079 | Proposal for the deletion of the window in the carburetter float chamber to avoid leaks. | ||
| View original record | RR 755 (10M) (DB130 12-9-24) MS 301225 ORIGINAL STANDARDISATION of CHASSIS PARTS. Description of Parts: DELETION OF WINDOW IN FLOAT CHAMBER. Origin: To avoid leaks. Experimental Test Report: It has… | ||
| img080 | Standardisation of a chassis frame, moving the joggle 1' further back to improve coachwork. | ||
| View original record | RR 755 (10M) (DB130 12-9-24) MS 301225 ORIGINAL COMPLETED 22.4.26. STANDARDISATION of CHASSIS PARTS. Date 18.3.26 Description of Parts: FRAME WITH JOGGLE 1" FURTHER BACK. Origin: To improve coachwork.… | ||
| img081 | Standardisation proposal for moving a frame joggle 1 inch further back to improve coachwork. | ||
| View original record | RR 755 (10M) (DB130 12-9-24) MS 301225 COMPLETED. 22.4.26. STANDARDISATION of CHASSIS PARTS. Date 18.3.26 No. 5380 Description of Parts: FRAME WITH JOGGLE 1" FURTHER BACK. Origin: To improve… | ||
| img082 | Standardisation of a modified starting handle jaw to improve ease of turning the engine by hand. | ||
| View original record | RR 755 (10H) (DB130 12-9-24) MS 301225 ORIGINAL COMPLETED 10.5.26. STANDARDISATION of CHASSIS PARTS. Date 23.4.26. X No. 5270 Drawing No. Part List Description of Parts: MODIFIED STARTING HANDLE JAW.… | ||
| img083 | Standardisation document for modified louvres for the bonnet. | ||
| View original record | RR 755 (10H) (DB130 12-9-24) MS 301225 ORIGINAL COMPLETED 10.5.26. STANDARDISATION of CHASSIS PARTS. Date 12.4.26 Description of Parts: MODIFIED LOUVRES FOR BONNET. Origin: To improve appearance.… | ||
| img084 | Standardisation document for a friction device for pivots to prevent low speed wobbles. | ||
| View original record | RR 735 (10H) (DB130 12-9-24) MS 301225 ORIGINAL. COMPLETED 13.5.26. STANDARDISATION of CHASSIS PARTS. Date 30.4.26 Description of Parts: FRICTION DEVICE FOR PIVOTS. Origin: To prevent low speed… | ||
| img085 | Standardisation of connecting rods with loose big end bearings to improve reliability. | ||
| View original record | RR 755 (10M) (DB130 12-9-24) MS 301225 ORIGINAL COMPLETED 27.5.26 STANDARDISATION of CHASSIS PARTS. Date 18.5.26. No. 5030 Description of Parts CONNECTING RODS WITH LOOSE BIG END BEARINGS. Origin. To… | ||
| img086 | Standardisation document for well base rims and 5 1/4' tyres to improve riding. | ||
| View original record | RR 755 (10M) (DB130 12-9-24) MS 301225 ORIGINAL COMPLETED 28.5.26 STANDARDISATION of CHASSIS PARTS. Description of Parts: WELL BASE RIMS AND 5 1/4" TYRES. Origin: To improve riding. Experimental Test… | ||
| img087 | Standardisation proposal for a modified steering design to reduce shocks on the steering wheel. | ||
| View original record | RR 755 (10M) (DB130 12-9-24) MS 301225 ORIGINAL COMPLETED 14.6.26 STANDARDISATION of CHASSIS PARTS. Date: 18.5.26 Drawing No. X No. 5430 Part List Description of Parts: MODIFIED STEERING. Origin: To… | ||
| img088 | Standardisation of chassis parts to move pedals nearer the dash. | ||
| View original record | RR 755 (10M) (DB130 12-9-24) MS 301225 STANDARDISATION OF CHASSIS PARTS COMPLETED 15.6.26 Date 18.5.26. X No. 5470 Drawing No. Part List Description of Parts: PEDALS NEARER THE DASH+ Origin: To… | ||
| img089 | Standardisation of chassis parts, approving the use of hydraulic dampers on the front of the 20 HP model. | ||
| View original record | RR 755 (10M) (DB130 12-9-24) MS 301225 COMPLETED 16.6.26 STANDARDISATION OF CHASSIS PARTS. Date 18.5.26 X No. 235 5520 Description of Parts: HYDRAULIC DAMPERS ON FRONT OF 20 HP. Origin: To reduce… | ||
| img090 | Standardisation of modified steering for existing 20 HP cars. | ||
| View original record | STANDARDISATION of CHASSIS PARTS. Description of Parts: MODIFIED STEERING FOR EXISTING 20 HP. CARS. Origin: To Improve steering. Experimental Test Report: The changeover consists of a new nut and worm… | ||
| img091 | Standardisation report for modified steering on existing 20 HP cars. | ||
| View original record | RR 755 (10M) (DB130 12-9-24) MS 301225 [STAMP] ORIGINAL COMPLETED 14.9.26 STANDARDISATION of CHASSIS PARTS. Date 20.8.26 Description of Parts: MODIFIED STEERING FOR EXISTING 20 HP. CARS. X No. 5430… | ||
| img092 | Standardisation proposal for incorporating 'B' type side levers with 'D' type steering. | ||
| View original record | RR 758 REVISED (IOH) (DE 444 6-10-26) BM. ORIGINAL COMPLETED 11.11.26 STANDARDISATION of CHASSIS PARTS. Date 22.10.26 Description of Parts. INCORPORATION OF 'B' TYPE SIDE LEVERS WITH 'D' TYPE… | ||
| img093 | Standardisation of chassis parts for flexibility in the servo device to eliminate servo jaggers. | ||
| View original record | RR 755 REVISED (10M) (DE444 6-10-26) BM. ORIGINAL COMPLETED 24.11.26 STANDARDISATION OF CHASSIS PARTS. Date 25.10.26 Description of Parts. FLEXIBILITY IN SERVO DEVICE. Origin. To eliminate servo… | ||
| img094 | Standardisation of bonnet louvres to improve appearance by reducing their height. | ||
| View original record | RR 755 REVISED (10H) (DE 444 6-10-26) BM. ORIGINAL COMPLETED 29.11.26 STANDARDISATION of CHASSIS PARTS. Date 18.11.26 Description of Parts. LOUVRES IN BONNET. Origin. To improve appearance.… | ||
| img095 | Standardisation of louvres in the bonnet for the 20 HP model, seeking confirmation of no extra cost. | ||
| View original record | C. to BY. To Hs. from BJ. Standardisation Sheet. BJ32/E29/11/36 -------------- 20 HP.Louvres in Bonnet. -------------- With reference to the attached Standardisation Sheet for louvres in the bonnet of… | ||
| img096 | Standardisation of a thermometer with an electrical contact for the chassis. | ||
| View original record | RR 755 REVISED (10H) (DE444 6-10-26) BM. COMPLETED 15.1.27 STANDARDISATION of CHASSIS PARTS. Date 4.1.27 5250 X No. 3875 Description of Parts. THERMOMETER WITH ELECTRICAL CONTACT. Origin. To prevent… | ||
| img097 | Standardisation document for a modified side steering tube to improve steering. | ||
| View original record | RR 755 REVISED (10M) (DE.444 6-10-26) BM. ORIGINAL COMPLETED 20.1.27 STANDARDISATION of CHASSIS PARTS. Date 3.12.26 Description of Parts. MODIFIED SIDE STEERING TUBE. Origin. To improve steering.… | ||
| img098 | Standardisation document for a spring loaded cross steering tube for the 20 HP chassis. | ||
| View original record | RR 755 REVISED (10H) (DE444 6-10-26) BM. [STAMP: ORIGINAL] [STAMP: COMPLETED 20.1.27] STANDARDISATION OF CHASSIS PARTS. Date 7.1.27 Description of Parts. SPRING LOADED CROSS STEERING TUBE. Origin. To… | ||
| img099 | Standardisation proposal for side steering tube springs to improve the 20 HP steering. | ||
| View original record | RR 755 REVISED (10H) (DE 444 6-10-26) BM. ORIGINAL COMPLETED 27.1.27 STANDARDISATION of CHASSIS PARTS. Date 10.12.26 No. 5450 Drawing No. F.54584 Part List Description of Parts: SIDE STEERING TUBE… | ||
| img100 | Outlining an agreement to modify side steering tube springs. | ||
| View original record | X.5454 SIDE STEERING TUBE SPRINGS. F.54584 DA. remarks :- Agreed on the understanding that F.54584 will be slightly modified in accordance with N.sch.2328 so that the more flexible springs with… | ||
| img101 | Standardisation proposal for side steering tube ends to reduce joggles and road shocks. | ||
| View original record | RR 755 REVISED (10M) (DE 444 6-10-26) BM. ORIGINAL COMPLETED 27.1.27 STANDARDISATION of CHASSIS PARTS. Description of Parts. SIDE STEERING TUBE ENDS. Origin. To reduce joggles and road shocks.… | ||
| img102 | Standardisation of a chassis part, changing the piston design to use five narrow rings instead of three narrow and one wide. | ||
| View original record | RR 785 REVISED (10M) (DE 649 9-12-26) BM. 2/1187 ORIGINAL COMPLETED 25.5.27 STANDARDISATION of CHASSIS PARTS. Date 6.4.27 X No. 5040 Drawing No. Part List Description of Parts. "PISTON WITH 5 NARROW… | ||
| img103 | Standardisation of chassis parts, replacing cast iron induction pipes with aluminium ones to improve reliability. | ||
| View original record | RR 785 REVISED (10H) (DE.649 9-12-26) BM. 2/1187 ORIGINAL COMPLETED 25.5.27 STANDARDISATION of CHASSIS PARTS. Date 5.4.27 Description of Parts. ALUMINIUM INDUCTION PIPE IN PLACE OF CAST IRON. X No.… | ||
| img104 | Standardisation report for an improved undershield. | ||
| View original record | RR 755 REVISED (10H) (OE. 9-12-25) BM. 2/1169. ORIGINAL COMPLETED 26.5.27 STANDARDISATION of CHASSIS PARTS. Date 5.4.27 Description of Parts. IMPROVED UNDERSHIELD. X No. 5290 Drawing No. Part List… | ||
| img105 | Standardisation test report for artillery wheels. | ||
| View original record | RR 755 REVISED (10H) (DR.649 9-12-26) 5M. 2/1157. ORIGINAL COMPLETED 1.6.27 STANDARDISATION of CHASSIS PARTS. Description of Parts. ARTILLERY WHEELS. Origin. To be fitted at customers special request.… | ||
| img106 | Returning a standardisation sheet for chassis parts with costs, noting specific exclusions from the savings calculation. | ||
| View original record | To Hs from My/Rb. Re: Standardisation of Chassis Parts. Sheet X.No.4586. Returned herewith standardisation sheet X.No.4586 with costs filled in. Please note the £1-13-11 saving does not take into… | ||
| img107 | Standardisation of a Zenith petrol filter to prevent stoppage of jets. | ||
| View original record | RR 785 REVISED (10M) (DE 648 9-12-26) BM. 2/1167. COMPLETED 11.6.27 STANDARDISATION of CHASSIS PARTS. Date 23.5.27 Description of Parts. ZENITH PETROL FILTER. X No. 3700 Origin. To prevent stoppage of… | ||
| img108 | Standardisation of an anti-brake squeaking device for the 20 HP chassis. | ||
| View original record | RR 755 REVISED (10M) (DE 649 9-12-26) BM. 2/1167. STANDARDISATION of CHASSIS PARTS. COMPLETED 16.6.27 Description of Parts. ANTI-BRAKE SQUEAKING DEVICE. Origin. To cure complaints of front brake… | ||
| img109 | Costs for the standardisation of an Anti-Brake Squeaking Device. | ||
| View original record | To Hs from My/Rb. My/Rb.7/N/139A/BJ.19.3.27. Standardisation of Chassis Parts. Anti-Brake Squeaking Device - X.5420/4612. Returned herewith above standardisation sheet with Costs filled in. Please… | ||
| img110 | Standardisation of hydraulic shock dampers on the rear of the chassis. | ||
| View original record | RR 755 REVISED (10H) (DE 649 9-12-26) 5M. 2/1157. ORIGINAL COMPLETED 20.6.27 STANDARDISATION of CHASSIS PARTS. Description of Parts. HYDRAULIC SHOCK DAMPERS ON REAR. Origin. To attain consistent… | ||
| img111 | Standardisation report for a new petrol tank with a reserve and larger filler. | ||
| View original record | RR 755 REVISED (10H) (DE 649 9-12-26) BM. 2/1157. ORIGINAL COMPLETED 23.6.27 STANDARDISATION of CHASSIS PARTS. Date 23.5.27 Description of Parts. NEW PETROL TANK WITH RESERVE AND FILLER. Origin.… | ||
| img112 | Standardisation report for 33' x 6' tyres on the 20 HP chassis. | ||
| View original record | RR 755 REVISED (10H) (DE 649 9-12-26) BM. 2/1167 ORIGINAL COMPLETED 22.6.27 STANDARDISATION of CHASSIS PARTS. Date 21.3.27 Description of Parts. 33" X 6" TYRES - 20 HP. X No. 5820 / 4565 Drawing No.… | ||
| img113 | Returning a standardisation sheet for chassis parts with costs filled in. | ||
| View original record | To Hs from My/Rb. My/Rb.3/N/139A/BJ.21.4.27. Re: Standardisation of Chassis Parts. Sheet X.No.5820/4565. Hs We return herewith the above standardisation sheet with costs filled in. The increase in… | ||
| img114 | Standardisation of a new petrol tank with a reserve and filler for a chassis. | ||
| View original record | RR 755 REVISED (10H) (OE 649 9-12-26) BM. 2/1167. ORIGINAL COMPLETED 23.6.27 STANDARDISATION of CHASSIS PARTS. Date 23.5.27 Description of Parts. NEW PETROL TANK WITH RESERVE AND FILLER. Origin.… | ||
| img115 | Modification to the side steering tube end to prevent clicking when turning on a left lock. | ||
| View original record | RR 755 REVISED (10H) (DE 649 9-12-26) 5M. 2/1187 ORIGINAL COMPLETED 8.7.27. STANDARDISATION of CHASSIS PARTS. Date 23.6.27 Description of Parts. MODIFICATION TO SIDE STEERING TUBE END. N.Sch.2417.… | ||
| img116 | Standardisation report for the spring-loaded front end side steering tube. | ||
| View original record | RR 755 REVISED (10H) (DE 649 9-12-26) BM. 2/1 ORIGINAL COMPLETED 8.7.27 STANDARDISATION of CHASSIS PARTS Date 21.6.27 Description of Parts: SPRING LOADED FRONT END SIDE STEERING TUBE. Origin: To… | ||
| img117 | Standardisation of a radiator with integral vertical shutters for the 20 HP chassis. | ||
| View original record | RR 75S REVISED (10H) (DE 649 9-12-26) BM. 2/1157. ORIGINAL COMPLETED 1.9.27 STANDARDISATION of CHASSIS PARTS. Description of Parts: RADIATOR WITH INTEGRAL VERTICAL SHUTTERS. Origin: To bring design in… | ||
| img118 | Standardisation of new controls on the instrument board to conform with the changeover of mixture controls to the column. | ||
| View original record | RR 755 REVISED (10H) (DE 649 9-12-26) BM. 2/1157. ORIGINAL COMPLETED 5.10.27 STANDARDISATION of CHASSIS PARTS. Date 23.5.27 Description of Parts. NEW CONTROLS ON INSTRUMENT BOARD. Origin. To conform… | ||
| img119 | Standardisation of chassis parts for the mixture control on column. | ||
| View original record | RR 755 REVISED (10M) (DE649 9-12-26) BM. 2/1197. ORIGINAL COMPLETED 7.10.27 STANDARDISATION of CHASSIS PARTS. Date 23.5.27 Description of Parts. MIXTURE CONTROL ON COLUMN. Origin. To bring design in… | ||
| img120 | Standardisation of the spare wheel fixing bolt, changing from a hexagon head to a handle. | ||
| View original record | RR 755 REVISED (10H) (DE649 9-12-26) BM. 2/1197. ORIGINAL COMPLETED 12.12.27 STANDARDISATION of CHASSIS PARTS. Date 7.11.27 Description of Parts. SPARE WHEEL FIXING BOLT WITH HANDLE INSTEAD OF… | ||
| img121 | Standardisation of chassis parts for a wider dashboard and bonnet to improve coachwork. | ||
| View original record | RR 789 REVISED (10M) (DE 649 9-12-26) BM. 2/1167. COMPLETED 22.12.27 STANDARDISATION of CHASSIS PARTS. Date 10.11.27 Description of Parts. WIDER DASHBOARD AND BONNET. X No. 5800 Drawing No. 5260… | ||
| img122 | Standardisation report for a modified starter motor drive to improve reliability. | ||
| View original record | RR 755 REVISED (10M) (DE 649 9-12-26) BM. 2/1157. ORIGINAL COMPLETED 18.4.28 STANDARDISATION of CHASSIS PARTS. Description of Parts: MODIFIED STARTER MOTOR DRIVE. Origin: To improve reliability.… | ||
| img123 | Standardisation proposal for improved steering geometry on the 20 HP chassis. | ||
| View original record | RR 755 REVISED (10H) (DE 649 9-12-26) BM. 2/1157. COMPLETED 13.2.28 STANDARDISATION of CHASSIS PARTS. Date 22.12.27 Description of Parts. 20 HP. IMPROVED STEERING GEOMETRY. Origin. To reduce road… | ||
| img124 | Standardisation proposal for a modified starter motor drive, to improve reliability by replacing the Bijur scheme. | ||
| View original record | RR 755 REVISED (10H) (DE 649 9-12-26) BM. 2/1187. ORIGINAL COMPLETED 18.4.28 STANDARDISATION of CHASSIS PARTS. Description of Parts. MODIFIED STARTER MOTOR DRIVE. Origin. To improve reliability.… | ||
| img125 | Standardisation document for replacing the .930 lead worm with a .750 lead worm and nut on the 20 HP chassis. | ||
| View original record | RR 755 REVISED (10M) (DE 649 9-12-26) BM. 2/1157. ORIGINAL COMPLETED 30.5.28 STANDARDISATION of CHASSIS PARTS. Date 2.4.28 Description of Parts. N.SCH.2265. F.54618/9. 20 HP. .750 LEAD WORM AND NUT.… | ||
| img126 | Standardisation of a reduced axle ratio for chassis parts to increase performance. | ||
| View original record | RR 755 REVISED (10H) (D.C. 777-29-2-28) MY C.LTD COMPLETED 7.6.28 STANDARDISATION of CHASSIS PARTS. Date 19.5.28 Drawing No. X No. 5350 Part List [X] D Use existing stock Alteration effective on… | ||
| img127 | Standardisation proposal for raising the headlamps on the 20 HP chassis. | ||
| View original record | RR 758 REVISED (10M) (D.C. 777 - 29-2-28) Mᴄ C.Lṭḍ STANDARDISATION of CHASSIS PARTS. Description of Parts. 20 HP. HEADLAMPS RAISED AS on 12-G-4. Origin. N. Sch. 2833. Experimental Test Report. Fitted… | ||
| img128 | Standardisation of chassis parts, specifically raising the headlamps on the 20 HP model. | ||
| View original record | RR 75S REVISED (10M) (D.C. 777-29-2-28) MF C.LYP COMPLETED 25.9.28 STANDARDISATION of CHASSIS PARTS. Date 3.9.28 Description of Parts. 20 HP. HEADLAMPS RAISED AS on 12-G-4. X No. 5800 Drawing No. Part… | ||
| img129 | Standardisation proposal for a higher radiator and dashboard to improve appearance. | ||
| View original record | RR 788 REVISED (10M) (D.C. 777-29-2-28) MC C.LTD COMPLETED 2.10.28 STANDARDISATION of CHASSIS PARTS Date 7.6.28 Description of Parts. HIGHER RADIATOR AND DASHBOARD. X No. 5500 Drawing No. Part List… | ||
| img130 | Standardisation of chassis parts for the 20 HP, specifically 20' rims and 6' tyres. | ||
| View original record | RR 755 REVISED (10H) (D.C. 777-29-2-28) Mc C.LTD COMPLETED 27.10.28 STANDARDISATION of CHASSIS PARTS. Date 24.7.28 No. 527 (5820 crossed out) Drawing No. Part List Description of Parts: 20 HP. 20"… | ||
| img131 | Standardisation of the 20 HP cast dash chassis part. | ||
| View original record | RR 755 REVISED (10H) (D.C. 777-20-2-28) M.C. L.TD COMPLETED 11.1.29 STANDARDISATION of CHASSIS PARTS. Date 9.7.28 Description of Parts. 20 HP. CAST DASH. Origin. To bring the 20 HP. car in line with… | ||
| img132 | Standardisation form for the modification to bonnet lines to improve appearance. | ||
| View original record | RR 785 REVISED (10H) (D.C. 777-29-2-28) ME C.LTD COMPLETED 11129 STANDARDISATION of CHASSIS PARTS. Date 6.11.28 Description of Parts. MODIFICATION TO BONNET LINES. Origin. To improve appearance.… | ||
| img133 | Standardisation of a modified gearbox casing to reduce the height of front floorboards. | ||
| View original record | RR 785 REVISED (10M) (D.C. 777-29-2-28) MT C.L.Yd COMPLETED 18.2.29 STANDARDISATION of CHASSIS PARTS. Date 30.5.28 Description of Parts. MODIFIED GEARBOX CASING. Origin. To reduce height of front… | ||
| img134 | Standardisation of Mechanics Joints for the 20 HP car to improve transmission. | ||
| View original record | RR 785 REVISED (10H) (D.C. 777-29-2-28) M'C C.L'TD COMPLETED 8.3.29 STANDARDISATION OF CHASSIS PARTS. Date 17.12.28 Description of Parts: 20 HP. CAR. MECHANICS JOINTS. X No. 4183 Origin: To improve… | ||
| img135 | Standardisation document for a modified brake lever. | ||
| View original record | RR 755 REVISED (10M) (D.C. 777-29-2-28) M.C.L.TD ORIGINAL COMPLETED 8.4.29 STANDARDISATION of CHASSIS PARTS. Date 30.5.28 Description of Parts. MODIFIED BRAKE LEVER. X No. 5420 Drawing No. Part List… | ||
| img136 | Standardisation of a 'Tangye' jack for the 20 HP chassis, replacing a Michelin-made part. | ||
| View original record | RR 785 REVISED (10H) (D.C. 777-29-2-28) MC.C.LYP ORIGINAL COMPLETED 24.4.29 STANDARDISATION of CHASSIS PARTS. Date 20.2.29 [Box Start] X No. 4491 Drawing No. C177 Part List A Scrap and replace at all… | ||
| img137 | Standardisation of the rear spare wheel carrier and luggage grid to increase ground clearance. | ||
| View original record | RR 755 REVISED (10M) (D.C. 777-29-2-28) MC C.LTD Completed 9/5/29. STANDARDISATION of CHASSIS PARTS. Date 26.3.29 Description of Parts. REAR SPARE WHEEL CARRIER AND LUGGAGE GRID. LOP. 51697. Origin.… | ||
| img138 | Standardisation document for the Hobson K-S distance petrol gauge. | ||
| View original record | RR 755 REVISED (10H) (D.C. 777 - 29 - 2 - 28) Mᶜ C. Lᵀᴰ STANDARDISATION of CHASSIS PARTS. COMPLETED 9.5.29 Date 7.6.28 Description of Parts. HOBSON K-S DISTANCE PETROL GAUGE. X No. 4038 Drawing No.… | ||
| img139 | Standardisation form for a chassis part, including costs, test dates, and approval signatures. | ||
| View original record | D.M.P. 2.9.29 STANDARDISATION OF CHASSIS PARTS Drg. No. T.29. GROUP No X HOMOLOGATION NOTICE No. M-8 The number of the first chassis on which the new part will be fitted......... O series. Date when… | ||
| img140 | Standardisation of a 20 HP steering wheel, including costs, tests, and approval. | ||
| View original record | RR.788 REVISED (10M) (D.C.777-20-2-28) MC C.L.TP COMPLETED 13.5.29 STANDARDISATION of CHASSIS PARTS. Date 4.4.29 Description of Parts. 20 HP. STEERING WHEEL. Origin. Request from Sales. Experimental… | ||
| img141 | Standardisation form for chassis parts detailing fitment, testing date, and associated costs. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS A.9.a./D. COMPLETED 13.9.29 C.A.S.O X The number of the chassis on which the new part will be fitted. P. series. Date when chassis will be handed to test. T/I 8.9.29… | ||
| img142 | Standardisation of the 20 HP Steering Wheel. | ||
| View original record | RR 788 REVISED (10H) (D.C. 777 - 29 - 2 - 28) M C.LTD STANDARDISATION of CHASSIS PARTS. Date 4.4.29 Description of Parts. 20 HP. STEERING WHEEL. Origin. Request from Sales. Experimental Test Report.… | ||
| img143 | Standardisation of chassis parts, specifically wheels with 19' rims to reduce car height. | ||
| View original record | RR 785 REVISED (10H) (D.C. 777 - 29 - 2 - 28) Mᶜ C.Lᵀᴰ COMPLETED 15.5.29 STANDARDISATION of CHASSIS PARTS. Date 24.4.29 X No. 5810/3725 Drawing No. Part List A Scrap and replace at all costs,… | ||
| img144 | Standardisation form for fitting a new part to a chassis, detailing testing information and costs. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS. MEMO. IN REPLY QUOTE D S9/8 A.29 DATE 15.6.29 OFFICE USE X ITEMS TO BE REPLACED BY: The number of the chassis on which the new part will be fitted. 51 in 'O' Date… | ||
| img145 | Standardisation of wheels with 19' rims to reduce vehicle height. | ||
| View original record | RR 759 REVISED (10H) (D.C. 777-29-2-28) Mᵀ C.Lᵀ STANDARDISATION OF CHASSIS PARTS. Date 24.4.29 X No. 5810 / 3725 Drawing No. Part List Description of Parts. WHEELS WITH 19" RIMS. Origin. To reduce… | ||
| img146 | Standardisation of chassis parts record for a petrol tank modification to increase ground clearance. | ||
| View original record | RR 755 REVISED (10H) (D.C. 777-29-2-28) MC C.LTD COMPLETED 29.5.29 STANDARDISATION of CHASSIS PARTS. Description of Parts. PETROL TANK. F.56268 Origin. To increase ground clearance. Experimental Test… | ||
| img147 | Record for fitting a new part to a chassis for testing purposes. | ||
| View original record | STANDARDISATION of CHASSIS PARTS. The number of the chassis on which the new part will be fitted. 51 in 'O' Date when chassis will be handed to test. 13.4.29 Cost of scrapped material, if any. Nil. | ||
| img148 | Standardisation of a 20 HP stiffer crankshaft to overcome vibrations. | ||
| View original record | RR 755 REVISED (10H) (D.C. 777 - 29 - 2 - 28) M C.LTD COMPLETED 29. 5. 29 STANDARDISATION of CHASSIS PARTS. Date 24. 4. 29 Description of Parts. 20 HP. STIFFER CRANKSHAFT. Drawing No. X No. 5010 Part… | ||
| img149 | Standardization of a chassis part, including test dates and costs. | ||
| View original record | STANDARDISATION of CHASSIS PARTS X cross Drg. No. EHTIHP The number of the first chassis on which the new part will be fitted. P. series. Date when chassis will be handed to test. 23. 9. 29 Cost of… | ||
| img150 | Standardisation of a 20 HP stiffer crankshaft. | ||
| View original record | RR 785 REVISED (10M) (D.C. 777-20-2-28) MC C.LTD STANDARDISATION of CHASSIS PARTS. Date 24.4.29 Description of Parts. 20 HP. STIFFER CRANKSHAFT. X No. 5010 Origin. To overcome vibrations and improve… | ||
| img151 | Standardisation of chassis parts for 20 HP narrow hubs to improve design. | ||
| View original record | RR 785 REVISED (10H) (D.C. 777 - 29 - 2 - 28) MC C.L.TD COMPLETED 13.6.29 STANDARDISATION of CHASSIS PARTS. Date 18.5.29 Description of Parts. 20 HP. NARROW HUBS. Drawing No. X No. 5810 Part List… | ||
| img152 | Test fitting of a new part to a 'P' series chassis. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS OR TO IMPROVE DESIGN. OR HAWTHORN BENT. X SPICER D.M.W/5.9.29 The number of the chassis on which the new part will be fitted. 'P' series. Date when chassis will be… | ||
| img153 | Standardisation document for the Bijur lubrication system to improve the 20 HP car. | ||
| View original record | RR 755 REVISED (IOH) (D.C. 777 - 29-2-28) M/r C.L.TP STANDARDISATION of CHASSIS PARTS. COMPLETED 20.11.29 Description of Parts. BIJUR LUBRICATION. Origin. To improve 20 HP. car. Date 26.3.29 X No.… | ||
| img154 | Report form for standardizing a chassis part, specifying the chassis, test date, and material cost. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS The number of the chassis on which the new part will be fitted. 51 in 'O'. Date when chassis will be handed to test. 13.4.29. Cost of scrapped material, if any. Nil.… | ||
| img155 | Standardisation of chassis parts for the Large Bore 20 HP Car 10-G4. | ||
| View original record | RR 785 REVISED (10M) (DF 587 4-1-29) BM. 2/3943 ORIGINAL COMPLETED 27.11.29 STANDARDISATION of CHASSIS PARTS. Date: 20.8.29 X No. 5840c. Description of Parts. LARGE BORE 20 HP. CAR 10-G4. Origin.… | ||
| img156 | Standardisation of the 20 HP long chassis frame to enable the use of raked steering on all cars. | ||
| View original record | RR 785 REVISED (10M) (D.C. 777 - 29-2-28) Mᶜ C. LTD STANDARDISATION of CHASSIS PARTS. Description of Parts. 20 HP. LONG FRAME. Origin. To enable raked steering to be used on all cars. Experimental… | ||
| img157 | Standardisation of lower controls in the steering column to improve appearance. | ||
| View original record | RR 759 REVISED (10M) (OF 697 4-1-29) SM. 2/5943 ORIGINAL COMPLETED 28.1.30 STANDARDISATION of CHASSIS PARTS. Date 27.11.29. Description of Parts. LOWER CONTROLS IN STEERING COLUMN. X No. 5430. Drawing… | ||
| img158 | Standardisation of improved K.1 K.L.G. plugs for the 20 HP chassis. | ||
| View original record | RR 753 REVISED (10M) (DF 637 4-1-29) BM. 2/5943 ORIGINAL COMPLETED 15.4.30 STANDARDISATION of CHASSIS PARTS. Date 19.3.30. X No. 1918 Description of Parts. IMPROVED K.1 K.L.G. PLUGS FOR 20 HP. Drawing… | ||
| img159 | Standardisation of a brake clank silencer and stop for front brake ropes. | ||
| View original record | RR 755 REVISED (10H) (OF 687 4-1-29) BM. 2/5913 ORIGINAL COMPLETED 2.5.30 STANDARDISATION of CHASSIS PARTS. Date 8.4.30. Description of Parts. BRAKE CLANK SILENCER AND STOP FOR FRONT BRAKE ROPES. No.… | ||
| img160 | Standardisation of chassis parts for the rear engine suspension. | ||
| View original record | RR 755 REVISED (10M) (DF 687 4-1-29) ORIGINAL. COMPLETED 17.5.30. STANDARDISATION of CHASSIS PARTS. Date 16.4.30. X No. 5005 Drawing No. Sch. 183 Part List LMO. 255 Description of Parts. REAR ENGINE… | ||
| img161 | Standardisation of chassis parts, specifically introducing 20% stiffer springs in the clutch to prevent slipping. | ||
| View original record | RR 755 REVISED (10M) (DF 687 4-1-29) BM. 2/5943. ORIGINAL COMPLETED 20.5.30 STANDARDISATION of CHASSIS PARTS. Description of Parts. 20% STIFFER SPRINGS IN CLUTCH TO PREVENT SLIPPING INCLUDING… | ||
| img162 | Standardisation of exhaust valves to replace a failed steel type. | ||
| View original record | RR 755 REVISED (10M) (DF 657 4-1-29) BM. 2/2943 ORIGINAL COMPLETED 22.5.30. STANDARDISATION of CHASSIS PARTS. Date 16.4.30. Description of Parts. EXHAUST VALVES E.53158. S/SLV. X No. 5250 Drawing No.… | ||
| img163 | Standardisation of chassis parts, specifically steel dashboard brackets. | ||
| View original record | RR 758 REVISED (10H) (DF 687 4-1-29) SH.2 ORIGINAL R. COMPLETED 27.6.30. STANDARDISATION of CHASSIS PARTS. Date 24.4.30. Description of Parts. Steel Dashboard Brackets. X No. 5500. Drawing No.… | ||
| img164 | Standardisation of chassis parts, specifically the exhaust system E.55578. | ||
| View original record | RR 755 REVISED (10H) (OF 687 4-1-28) RR.1/5843 ORIGINAL COMPLETED 27.5.30. STANDARDISATION of CHASSIS PARTS. Date 23.4.30+ No. 2280 Description of Parts. EXHAUST SYSTEM. E.55578. Drawing No. C.1241… | ||
| img165 | Standardisation of a chassis part modification to improve lubrication by removing a restriction in the side-steering tube drip-plug. | ||
| View original record | RR 75B REVISED (10M) (DG 348 19-7-29) BM. 6/643. COMPLETED 27.6.30 STANDARDISATION of CHASSIS PARTS. Date 24.4.30. Description of Parts. Increased lubrication to Front end of Side-steering tube by… | ||
| img166 | Standardisation of chassis parts for an engine with 5.25 to 1 compression ratio. | ||
| View original record | RR 785 REVISED (10M) (DG 248 19-7-29) SM. 6/643. COMPLETED 27.6.30. STANDARDISATION of CHASSIS PARTS. Date 24.4.30. X No. 5770 Description of Parts. Engine with 5.25 to 1 compression ratio. With coil… | ||
| img167 | Standardisation document for the lower radiator cap on the 20 HP model. | ||
| View original record | RR 765 REVISED (10H) (DG 348 18-7-29) BM. 5/543. COMPLETED 27.6.30 ORIGINAL STANDARDISATION of CHASSIS PARTS. Date 30.4.30 Description of Parts. LOWER RADIATOR CAP, 20 HP. X No. 5250 Drawing No. N.… | ||
| img168 | Standardisation of the CL.377 Operating Lever on the rear Brake Equalizing Shaft. | ||
| View original record | RR 755 REVISED (10M) (DD 348 19-7-29) 5M. 6/643. COMPLETED 27.6.30 ORIGINAL STANDARDISATION of CHASSIS PARTS. Date 25.4.30 Description of Parts. CL.377 Operating Lever on rear Brake Equalizing Shaft.… | ||
| img169 | Standardisation of chassis parts, specifically for improved lubrication on shock damper connecting links. | ||
| View original record | RR 788 REVISED (10H) (DG 348 18-7-29) SM. 6/643. ORIGINAL COMPLETED 2.7.30. STANDARDISATION of CHASSIS PARTS. Description of Parts. Improved Lubrication on Shock Damper Connecting Links. Origin. To… | ||
| img170 | Standardisation of chassis parts for a cotton duck brake lining for the servo. | ||
| View original record | RR 755 REVISED (10M) (DF 687 4-1-29) B'M. 2/5943) COMPLETED 2.7.30. STANDARDISATION of CHASSIS PARTS. Date 15.4.30. Description of Parts. COTTON DUCK BRAKE LINING FOR SERVO. X No. 5370 Drawing No.… | ||
| img171 | Standardisation document for lubricated road springs, designed to improve riding qualities. | ||
| View original record | RR 755 REVISED (10H) (DE 444 6-10-26) BM. ORIGINAL COMPLETED 19.7.30. STANDARDISATION of CHASSIS PARTS. Date 8.4.30. Description of Parts. LUBRICATED ROAD SPRINGS. X No. 5410 Origin. To improve riding… | ||
| img172 | Reversion to reserve petrol supply in main tank and deletion of reserve supply in the Autovac tank for the 20/25 HP chassis. | ||
| View original record | RR 78S REVISED (10M) (DG 348 19-7-29) SM. 6/643. ORIGINAL COMPLETED 8.9.30. STANDARDISATION of CHASSIS PARTS. Date 21.7.30. Description of Parts. REVERSION TO RESERVE PETROL SUPPLY IN MAIN TANK AND… | ||
| img173 | Standardisation of headlamp and wing stay parts to resolve a 'jellying' issue on the front of the car. | ||
| View original record | RR 755 REVISED (10M) (DG 340 19-7-29) BM. 6/543 COMPLETED 27.9.30 ORIGINAL STANDARDISATION of CHASSIS PARTS. Date 30.6.30 Reference No. 457/ X No. 5390. 5800. Drawing No. Part List Description of… | ||
| img174 | Standardisation of chassis parts, specifically asbestos valve guide washers for the 20 HP model. | ||
| View original record | RR 755 (10M) (3-7-30) BM. 6/2571. ORIGINAL COMPLETED 17.10.30. STANDARDISATION of CHASSIS PARTS. Date 1.9.30. Description of Parts. ASBESTOS VALVE GUIDE WASHERS ON THE 20 HP. X No. 5060 Drawing No.… | ||
| img175 | Standardisation report for a radiator cap with an anti-splash valve. | ||
| View original record | RR 788 (10M) (3-7-30) BM. 6/2871. ORIGINAL COMPLETED 16.12.30. STANDARDISATION of CHASSIS PARTS. Date 7.11.30. Description of Parts. RADIATOR CAP WITH ANTI-SPLASH VALVE. Origin. To reduce loss of… | ||
| img176 | Standardisation form for a new chassis part, detailing implementation and costs. | ||
| View original record | STANDARDISATION of CHASSIS PARTS AMD. 7.11.20 PART, NEW - WITH J.C. HEALTH X. 2380 Drawing Hall The number of the first chassis on Which the new part will be fitted. Not decided. Date when chassis… | ||
| img177 | Standardisation of a Dunlop Rubber Fan Belt for the 25 HP Chassis. | ||
| View original record | RR 752 (10M) (3-7-30) BM. 6/2571. ORIGINAL COMPLETED 11.2.31. STANDARDISATION of CHASSIS PARTS. Date 14.1.31. Description of Parts. Dunlop Rubber Fan Belt. 25 HP. Chassis. Origin. To increase… | ||
| img178 | First chassis fitting for a new part, the scheduled test date, and associated costs. | ||
| View original record | Header Text (mirrored from reverse): ORIGINAL STANDARDISATION OF PARTS COMPLETED 11.2.31 Description of part Drawing No. Material Preliminary Test Report Final Test Report V.I.C. 31 DO No. 55308… | ||
| img179 | Standardisation document for a 2.5' propeller shaft for the 25 HP model, aimed at preventing whirling. | ||
| View original record | RR 755 (10M) (3-7-30) BM. 6/2571. COMPLETED 11.2.31. STANDARDISATION of CHASSIS PARTS. Date 17.10.30. Description of Parts. 2.5" Propeller Shaft for the 25 HP. Origin. To prevent whirling. Drawing No.… | ||
| img180 | Standardisation record for a propeller shaft to rear axle part. | ||
| View original record | STANDARDISATION of CHASSIS PARTS Ref. No.: 14 / 2.1.31 Date: 2.1.31 Description of Part: Propeller shaft to rear axle C.H. Drawing No.: X 3480. Object: To reverse fitting. Reason for Test: To test.… | ||
| img181 | Standardisation of a Rear Brake Equaliser (Foot) to reduce the sponginess of brakes by replacing lever G.52381 with G.54143. | ||
| View original record | RR 759 (10M) (3-7-30) BM. 6/2571. ORIGINAL COMPLETED 21.2.31. STANDARDISATION of CHASSIS PARTS. Date: 5.1.31. Description of Parts. Rear Brake Equaliser (Foot). reducing direct braking by 25%.… | ||
| img182 | Standardisation of parts form detailing chassis testing, costs, and approvals. | ||
| View original record | STANDARDISATION of PARTS ORIGIN COPIED PARTS LIST From H.R. The number of the first chassis on which the new part will be fitted...... 'S' Series. Date when chassis will be handed to test......… | ||
| img183 | Standardisation of cotton 'A' fabric linings for 20/25 HP torque reaction dampers to reduce booming. | ||
| View original record | RR 758 (10H) (3-7-30) BM. 6/2571. COMPLETED 3.3.31 STANDARDISATION of CHASSIS PARTS. Date 18.12.30. Description of Parts: Cotton 'A' Fabric Linings for Torque Reaction Dampers. 20/25 HP. No. 634 /… | ||
| img184 | Standardisation of chassis parts form, detailing costs, implementation, and a list of approvals. | ||
| View original record | CONFIDENTIAL S.F.S. /83 STANDARDISATION OF CHASSIS PARTS S.F.S. D32 / Date 18.3.32 X 2008 633 Drawn by Design Office 'A' Section, for action please. Ref. S.F.S./82 Experimental Test Report. A… | ||
| img185 | Standardisation report for an Enots Petrol Filter on 25 HP cars. | ||
| View original record | RR. 78B (10H) (3-7-30) BM. 6/2571. ORIGINAL COMPLETED 6.3.31. STANDARDISATION of CHASSIS PARTS. Date 14.1.31. Description of Parts. Enots Petrol Filter. Origin. To shorten petrol pipe and improve… | ||
| img186 | Standardisation of parts form detailing costs and chassis fitting information. | ||
| View original record | STANDARDISATION OF PARTS Description of Part COPIED .3.3.31. 21.49.A2. Handwritten note: No 2. / Thos H. Hall / 28/2/31 The number of the first chassis on which the new part will be fitted.........… | ||
| img187 | Standardisation of chassis parts, deleting the starter carburetter jet in the induction pipe. | ||
| View original record | RR 78B (10M) (3-7-30) BM. 6/2571. STANDARDISATION OF CHASSIS PARTS. COMPLETED 30.3.31. Date 14.1.31. X No. X5280. Drawing No. F51083. Part List Description of Parts: Starter Carburetter Jet in… | ||
| img188 | Standardisation form for a chassis part to be fitted to 'T' Series vehicles. | ||
| View original record | STANDARDISATION of CHASSIS PARTS Ref. D.S. 4. A. Drawing No. X The number of the first chassis on which the new part will be fitted. 'T' Series. Date when chassis will be handed to test. 19.4.31. Cost… | ||
| img189 | Standardisation of chassis parts, increasing the thickness of the front and rear brake shoes to .375 inches. | ||
| View original record | RR 788 (10H) (3-7-30) BM. 6/2571. ORIGINAL COMPLETED 16.4.31. STANDARDISATION of CHASSIS PARTS. Date 14.1.31. Description of Parts. Brake shoes, Front and Rear. .375" thick. Origin. To increase life… | ||
| img190 | Standardisation form for a new part, detailing costs, chassis fitting information, and approval signatures. | ||
| View original record | STANDARDISATION PARTS. Handwritten: Show P.L. 22 Ref. No. X M.A.C./3530 Date. 12.1.21. The number of the first chassis on which the new part will be fitted................... Not decided Date when… | ||
| img191 | Standardisation of chassis parts for the automatic oiling of the clutch spigot from the gear box. | ||
| View original record | RR 758 (10H) (3-7-30) BM. 6/2571. COMPLETED 16.4.31. STANDARDISATION of CHASSIS PARTS. Date 15.1.31. Description of Parts: Automatic oiling of clutch spigot from gear box. Origin: To do away with hand… | ||
| img192 | Standardisation form for a new part, detailing costs and departmental approvals. | ||
| View original record | STANDARDISATION OF SISTS. PARTS. Description of Alteration To be filled up by Mr. Phillipe of Sqdn. Office. Handwritten sticker: 107L From H. Reference: X .95.X DRAWING NO. C.77 PART NO. 784 Last Test… | ||
| img193 | Standardisation of chassis parts report for a revised bonnet overhanging the dash with concealed hinges. | ||
| View original record | RR 78B (10M) (3-7-30) BM. 6/2571. ORIGINAL. COMPLETED 29.4.31. STANDARDISATION of CHASSIS PARTS. Date 15.1.31. Description of Parts. Revised Bonnet overhanging Dash and concealed Bonnet Hinges.… | ||
| img194 | Standardisation record for SISS parts on a 20/25 HP Chassis. | ||
| View original record | STANDARDISATION SISS PARTS Ref. No. X 4202 Date. 25.8.31. COPIES JAN. 25.8.31. D. 29330 O. 29145 L. 29175 Handwritten: sp. from R. 29 Stamp: Not sent through for tooling owing to probable change.… | ||
| img195 | Standardisation of spring loaded tubular connecting links for the 25 HP hydraulics. | ||
| View original record | RR 755 (10M) (3-7-30) BM. 6/2571. COMPLETED 6.5.31. STANDARDISATION of CHASSIS PARTS. Date 2.12.30 X No. 5520. Drawing No. Sch. 1296. Part List Fig. 2 Description of Parts. SPRING LOADED TUBULAR… | ||
| img196 | Standardisation of parts form for a crankshaft oil plug, noting it is obsolete due to a new design. | ||
| View original record | STANDARDISATION OF S12 PARTS COMPLETED C. 2. 35 Ref. S/12.30 Date 2.12.30 Description of Subject: CRANKSHAFT OIL PLUG X M.12658 FOR ALL HY & RH ENGINES [Stamped in bold black ink] This will not be… | ||
| img197 | Standardisation of a revised petrol filler with a hinged filler cap for the Phantom II chassis. | ||
| View original record | RR 78B (10M) (3-7-30) BM. 6/2571. COMPLETED 6. 5. 31. STANDARDISATION of CHASSIS PARTS. Date 15. 1. 31. Description of Parts. Revised Petrol Filler with Hinged Filler Cap. Origin. To prevent loss of… | ||
| img198 | Standardization of parts form detailing chassis fitting, testing, and costs. | ||
| View original record | Text from front of document: The number of the first chassis on which the new part will be fitted......... 'T' Series. Date when chassis will be handed to test....................... 19th. April,1931.… | ||
| img199 | Standardisation of chassis parts by increasing oil capacity in the engine sump to keep the oil cooler. | ||
| View original record | RR 78B (10M) (S459. 24-10-30) 6/3185. ORIGINAL. COMPLETED 14.7.31. STANDARDISATION of CHASSIS PARTS. Date 29.4.31. Description of Parts. INCREASING OIL CAPACITY IN ENGINE SUMP TO 1.25 GALLONS WITH A… | ||
| img200 | Standardisation of chassis parts to increase engine sump oil capacity and keep the oil cooler. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS Description of Proposal: INCREASING OIL CAPACITY IN ENGINE SUMP TO 2½ GALLONS WITH A MATERIAL B.4 AND C.3 CHASSIS. Drawing No. X 8000 Order: To keep oil cooler. The… | ||
| img201 | Standardisation of the water pump end cover by replacing it with a combined cover and bend. | ||
| View original record | RR 755 (10H) (8459. 24-10-30) 5/3185. ORIGINAL. COMPLETED 20.11.31. STANDARDISATION of CHASSIS PARTS. Date 8.10.31 Description of Parts. WATER PUMP END COVER COMBINED COVER AND BEND. Origin. To lessen… | ||
| img202 | Standardisation of parts form detailing costs and approvals for fitting a new part to a chassis. | ||
| View original record | The document text is mirrored and has been transcribed as if corrected. ORIGINAL STANDARDISATION OF PARTS Top Right Section: Ref. H./H.C./V10-81 Date 8.10.31 Top Left Section: Date 8.10.31 X 1800… | ||
| img203 | Standardisation of 25.HP. Matrix Tubes with 8 Indentations to improve cooling effect. | ||
| View original record | RR 755 (10M) (3-7-30) BM. 6/2571. COMPLETED 21.11.31. ORIGINAL STANDARDISATION of CHASSIS PARTS. Date 19.1.31. Description of Parts. 25.HP. Matrix Tubes with 8 Indentations. Origin. To remove any… | ||
| img204 | Standardisation document for a chassis part, specifying the 'T' Series chassis for fitting and associated testing and cost details. | ||
| View original record | STANDARDISATION of CHASSIS PARTS D. 92 / 20.1.21 D.E.S.I.G.N. OFFICE The number of the first chassis on which the new part will be fitted. 'T' Series. Date when chassis will be handed to test. 19th.… | ||
| img205 | Standardisation of chassis parts, specifically a test report on India Tyres as an alternative to Dunlop tyres. | ||
| View original record | RR 758 (10M) (3-7-30) BM. 6/2571. ORIGINAL COMPLETED 25.11.31. STANDARDISATION of CHASSIS PARTS. Date 4.3.31. X No. 4462. Description of Parts: India Tyres. Super Duty 6.00 X 19. for 4 1/2 X 19.… | ||
| img206 | Standardisation report for an improved Magneto and Dynamo drive on the 20/25 HP chassis. | ||
| View original record | RR 788 (10M) (3-7-30) EM. 6/2571. ORIGINAL COMPLETED 26.11.31. STANDARDISATION of CHASSIS PARTS. Date 16.1.31. Description of Parts: Magneto and Dynamo drive. Origin: Improved dynamo drive to overcome… | ||
| img207 | Standardisation of chassis parts form, noting that the modification is not proceeding to production. | ||
| View original record | ORIGINAL STANDARDISATION OF CHASSIS PARTS As There is no likelihood of this coming on production, tool cost have not been gone into. The number of the first chassis on which the new part will be… | ||
| img208 | Standardisation document for modified lubrication to rear brake actuating shafts. | ||
| View original record | RR 755 (10H) (S459. 24-10-30) c/3185. ORIGINAL COMPLETED 2.12.31. STANDARDISATION of CHASSIS PARTS. Date 8.10.31 No. 1559 No. 5360 Drawing No. LOP. C3594 Price List Description of Parts. MODIFIED… | ||
| img209 | Standardisation form for chassis parts regarding a new part to be fitted to overcome a mixture shortage. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS WE NOTE:- YOUR INSTRUCTION THAT WE ARE TO PROVIDE NEW AUTOMATIC PARTS. (Reversed text) Description of Part. TO overcome SHORTAGE of mixture. To provide better Idling.… | ||
| img210 | Standardisation of Chassis Parts for a Front Apron. | ||
| View original record | RR 75B (10M) (8459. 24-10-30) 6/3185. ORIGINAL. COMPLETED 2.12.31. STANDARDISATION of CHASSIS PARTS. Date 20.10.31 X No. 4531. Description of Parts. FRONT APRON. Origin. To improve appearance.… | ||
| img211 | Standardisation form for a chassis part, detailing its introduction, costs, and approval history. | ||
| View original record | STANDARDISATION of CHASSIS PARTS. Description of Part Part No. Origin: To improve appearance. Experiment Test Report No. Drawing No. Material Fitted to B.O.O.I. VI. G.3. D.I. because of new front… | ||
| img212 | Standardisation test report for low rating front road springs. | ||
| View original record | RR 755 (10M) (6459. 24-10-30) 6/3165. COMPLETED 4.12.31. STANDARDISATION of CHASSIS PARTS. Date 5.5.31 Description of Parts. LOW RATING FRONT ROAD SPRINGS. X No. 5410 Origin. To improve riding… | ||
| img213 | Standardisation of low fitting front road springs to improve riding control. | ||
| View original record | STANDARDISATION of CHASSIS PARTS Description of Part: LOW FITTING FRONT ROAD SPRINGS Drawing No: X Object: To improve riding control. Experimental Test Report. Road Test Report. The number of the… | ||
| img214 | Standardisation of chassis parts for low rating rear road springs to improve riding comfort. | ||
| View original record | RR 788 (10M) (8459. 24-10-30) 6/3185. ORIGINAL COMPLETED 4.12.31. STANDARDISATION of CHASSIS PARTS. Date 5.5.31. Description of Parts. LOW RATING REAR ROAD SPRINGS. X No. 5410. Origin. To improve… | ||
| img215 | Standardisation form for low rating rear road springs, including costs and approval signatures. | ||
| View original record | (Text is mirrored and upside down in the original document) STANDARDISATION OF CHASSIS PARTS LOW RATING REAR ROAD SPRINGS Drawing No. X M.O/410 To improve riding comfort. The number of the first… | ||
| img216 | Standardisation of a Low Inertia Spring Drive for the 20/25 HP Chassis. | ||
| View original record | RR 759 (10M) (3-7-30) BM. 6/2571. ORIGINAL COMPLETED 4.12.31. STANDARDISATION of CHASSIS PARTS. Date 15.1.31. Description of Parts. Low Inertia Spring Drive. Origin. To obtain more consistent results… | ||
| img217 | List of parts for standardization for 9.HP Cylinders, a project which was not put into production. | ||
| View original record | STANDARDIZATION of PARTS Handwritten Note: 29 from R.F.S. DEVICE No. X .00.00. Date: 21.12.28 Stamped Text 1: As there is no likelihood of this coming on production, tool costs have not been gone… | ||
| img218 | Standardisation of flip flap type bonnet ventilators similar to the Phantom to overcome overheating. | ||
| View original record | RR 788 (10M) (6459. 24-10-30) 6/5185. ORIGINAL COMPLETED 4.12.31. STANDARDISATION of CHASSIS PARTS. Date 5.10.31 X No. 1085 5260 Drawing No. 3232 N. Sch Part List Description of Parts. FLIP FLAP TYPE… | ||
| img219 | Standardisation document for a clip for flat type magneto wiring on a chassis. | ||
| View original record | ORIGINAL STANDARDISATION OF CHASSIS PARTS. 22/8 S.W.G. (.028") Description of Part: CLIP FOR FLAT TYPE MAGNETO WIRING. SIMILAR TO PHANTOM. Origin: Experl Test Report. Reason for Change: TO OVERCOME… | ||
| img220 | Standardisation document for a radiator dropped 4.000 inches in the frame. | ||
| View original record | RR 78B (10M) (8458. 24-10-30) 6/318B ORIGINAL. COMPLETED 10.12.31 STANDARDISATION of CHASSIS PARTS. Date 7.10.31 Description of Parts: RADIATOR DROPPED 4.000" IN FRAME Origin: To improve appearance.… | ||
| img221 | Standardization report for fitting a combined radiator throttle and governor unit. | ||
| View original record | ORIGINAL STANDARDISATION CHASSIS PARTS Description of Part: RADIATOR THROTTLE & GOV. IN ONE. Origin: To improve appearance, it is also beneficial to cooling. Experiment Test Report No. FITTED to… | ||
| img222 | Standardisation of centralised lubrication for the front axle. | ||
| View original record | RR 759 (10M) (3-7-30) BM. 6/2571. ORIGINAL COMPLETED 10.12.31. STANDARDISATION of CHASSIS PARTS. Date 14.1.31. Description of Parts. centralised lubrication to Front Axle. Origin. To bring the front… | ||
| img223 | Costs and implementation for fitting a new part to a chassis. | ||
| View original record | Handwritten: 22/Knowles R.A. The number of the first chassis on which the new part will be fitted...............Not decided Date when chassis will be handed to test................ Cost of scrapped… | ||
| img224 | Standardisation of centralised lubrication for the rear axle brake mechanism. | ||
| View original record | RR 758 (10M) (3-7-30) BM. 6/2571. ORIGINAL. COMPLETED 10.12.31. STANDARDISATION of CHASSIS PARTS. Date 5.2.31. X No. 3806 / 5420 Drawing S. 3142 No. Ch. 429. Part List Description of Parts.… | ||
| img225 | Approval and issue document for tools listed on a Standardisation Sheet for the 20 HP Chassis. | ||
| View original record | from L.P. #2 Particulars re Tools Included on Standardisation Sheet No. X3806/5420 dated 14.1.31. [Stamped Text]: 20 H.P. CHASSIS [Table]: INITIAL | DATE | REMARKS SE | 12.2.31 | ISSUED R. | 16.2.31 |… | ||
| img226 | Standardisation of chassis parts for an anti-squeak front brake modification. | ||
| View original record | RR 785 (10M) (S459, 24-10-30) 6/3165. ORIGINAL COMPLETED 18.12.31. STANDARDISATION of CHASSIS PARTS Date 8.10.31 Description of Parts. FRONT BRAKES. ANTI-SQUEAK. Origin. To overcome front brake… | ||
| img227 | Form for the standardization of a front spring anti-rattle device. | ||
| View original record | STANDARDISATION OF CHASSIS PARTS. ORIGINAL Drawing No. X 2350 Old Part No. F.48011 ANTI-RATTLE DEVICE FRONT SPRING Reason for modification to obviate cost from loose parts Examined for Test Report… | ||