From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Criticisms and proposed modifications for the gear control on 25HP and other models.
| Identifier | ExFiles\Box 15\5\ Scan327 | |
| Date | 25th June 1932 | |
| HS.{Lord Ernest Hives - Chair} } FROM HDY{William Hardy} X7310 HDY{William Hardy}1/M25.6.32. C. to SG.{Arthur F. Sidgreaves - MD} WOR.{Arthur Wormald - General Works Manager} E.{Mr Elliott - Chief Engineer} DA.{Bernard Day - Chassis Design} GEAR CONTROL. X.5310 X.7310 X.4027 R.{Sir Henry Royce} has criticised the gear control on the 25 HP. car here - 16.G.IV. - on the score of undue heaviness of operation of the lever sideways, due to oil drag, and also too high a spring load and spring rating on the reverse stop. To remedy the former trouble we suggest definitely counterboring by a few hundreths of an inch the well lubricated inner bearing in the aluminium of the change lever bracket from the outer end to such a depth that 1" of bearing remains adjacent to the gearbox face. This will remove 1.25" of bearing surface. The outer bush is only 1.2" long and should not be altered unless the necessary improvement cannot be made on the inner bearing. As regards the latter fault we find that the reverse stop on 16.G.IV. requires a load of 5 lbs. to commence its movement, and about 9 lbs. to depress it fully. This should be reduced to 2 lbs. initial load with an increase when fully compressed of not more than 50%. Max. 3 lbs. The above modifications, if found satisfactory, should be made to all cars - 25HP., Phantom, J.3. and Peregrine. HDY.{William Hardy} | ||