Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Modification to a throttle governor, focusing on the selection of a spring with a different load rating.

Identifier  ExFiles\Box 66a\3\  scan0048
Date  20th March 1925
  
S E C R E T
To BY.{R.W. Bailey - Chief Engineer} from E.{Mr Elliott - Chief Engineer}
c. to CJ.
c. to Hs.{Lord Ernest Hives - Chair}
E.{Mr Elliott - Chief Engineer} A.{Mr Adams} C.
E5/M20.3.25.
THROTTLE GOVERNOR. X.8140.
We send herewith drawing LeC.2034. shewing the permanent modification to the above.
We have already arranged how existing governor cases should be modified. We are shewing a different spring on LeC.2034. with the lower rating, but the same initial load in position.
The original spring we understood was made to figures specified by the Expl. Dept. and the load started at .5 lbs. and went up to 2.75 lbs. The disadvantage of a spring made to these figures we think is that the initial deflection would be so small as to make the initial load very uncertain.
We should therefore like to use the spring of lower rating on LeC.2034. HS.{Lord Ernest Hives - Chair} will say whether this will do or whether an increase of load is desired with a lower rating spring.
E.{Mr Elliott - Chief Engineer}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙