From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
The position of a 2-level device in the petrol tank and sump design for the 20HP model.
| Identifier | WestWitteringFiles\S\2April1928-June1928\ Scan111 | |
| Date | 23th May 1928 | |
| BY.{R.W. Bailey - Chief Engineer} FROM DA.{Bernard Day - Chassis Design} C. to BJ. HS{Lord Ernest Hives - Chair} 20HP. - 2 LEVEL DEVICE IN PETROL TANK. DA{Bernard Day - Chassis Design}2/M23.5.28. X5460 X4038 X615 With reference to the question of the position of the 2 level device in relation to the shape of the body which you indicate on LF.820., we send herewith N. scheme 2612. shewing the position which we should like the 2 level device to occupy for the sake of facility in getting it out, and for symmetry with the K.S. gauge when that is fitted, which we anticipate will be in the immediate future. With reference to the shapes of body shewn on LF.820. we do not think that either the red or the white line is possible, and we hope that there will be no bodies made like that. We notice on the general arrangement of the petrol tank for 'L' series that we are still using the old deep sump and projecting drain plug. As this seriously affects the ground clearance, and a design of a shallower sump for Phantom has been in the hands of Derby for some time, we should like that same sump adapted to the 20HP. We hope it will be possible to get it at any rate on to the next series. DA.{Bernard Day - Chassis Design} | ||