Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Parts list for the 'Goshawk' II S.S. Motor, covering bearing brackets, brush holders, and cross connectors.

Identifier  ExFiles\Box 35\4\  scan 052
Date  10th May 1921
  
[STAMP] EXPERIMENTAL
[HANDWRITTEN] X.4384
[STAMP] E.O. [SIGNATURE]
BY/WEKL/RF9. 9. 21.
[STAMP] RECEIVED 10 MAY 1921

X. 4384 - "GOSHAWK" II. R.R. DESIGN OF S.S. MOTOR.
Bearing Brackets, Brush Holders, & Cross Conn:

In connection with the above Unit please receive herewith one blue print of each of the following details, SFT.{Mr Swift} and TB., also receive one set.

(X) D.{John DeLooze - Company Secretary} 50220D.C. Bearing Bracket A/DC 2221 - 1 off
D.{John DeLooze - Company Secretary} 50221 Brush Holder Body R.H. B 215 2 "
D.{John DeLooze - Company Secretary} 50222 " " L.H. B 215 2 "
D.{John DeLooze - Company Secretary} 50223 Brush Holder Box B 215 4 "
D.{John DeLooze - Company Secretary} 50224 Spring Spindle L.H. S/M 201B 2 "
D.{John DeLooze - Company Secretary} 50225 " " R.H. " 2 "
D.{John DeLooze - Company Secretary} 50226 Brush Holder Terminal Sheet Copper. 4 off
D.{John DeLooze - Company Secretary} 50227 Brush Spring S/CS 4 "
D.{John DeLooze - Company Secretary} 50228 Commutator Brush 4 "
D.{John DeLooze - Company Secretary} 50229 Bush for Spring Spindle B 215 4 "
D.{John DeLooze - Company Secretary} 50230 Stop B 215 4 "
D.{John DeLooze - Company Secretary} 50231 Screw for Brush Holder
Terminal S/M 201B 8 "
D.{John DeLooze - Company Secretary} 50233 Brush Holder Insulation Bakelite
Micarta 2 "
D.{John DeLooze - Company Secretary} 50234 Insulating Plate " 2 "
D.{John DeLooze - Company Secretary} 50235 " Bush 4 "
D.{John DeLooze - Company Secretary} 50236 [HANDWRITTEN] Bolt Securing Earthed Brush Holder D/M 216 4 "
D.{John DeLooze - Company Secretary} 50237 [HANDWRITTEN] Bolt Securing Brush
Holder. " 4 "
D.{John DeLooze - Company Secretary} 50239 Thackeray Washer S/CS 8 "
D.{John DeLooze - Company Secretary} 50240 Locking Plate for D.50257. B 215 2 "
D.{John DeLooze - Company Secretary} 50241 Cross Connector Copper. 1 "
D.{John DeLooze - Company Secretary} 50242 Retaining Plate B 215 1 "
D.{John DeLooze - Company Secretary} 50243 Securing Screw for End H/S.D 234 1 "
Cover.
D.{John DeLooze - Company Secretary} 50244 Clamping Washer for D.50243 " 1 "
D.{John DeLooze - Company Secretary} 50245 End Plate. D/M 216 1 "
D.{John DeLooze - Company Secretary} 50246 End Cover. A 223 1 "
D.{John DeLooze - Company Secretary} 50304 Rivet for D.50303 Copper 2 "

(X) Two blue prints of this detail are sent one of which should be handed to Mr. Walker(Pattern Shop).

The following parts will also be required:-

Journal Ball Bearing Hoffmann's "Light" type No.115 - 15m/m x 35m/m x 11m/m.{Mr Moon / Mr Moore}

Contd.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙