From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Design of riveted-on clips for road springs on 40/50 and 20 HP models.
| Identifier | ExFiles\Box 29\4\ Scan009 | |
| Date | 3rd May 1927 | |
| To BY.{R.W. Bailey - Chief Engineer} from DA.{Bernard Day - Chassis Design} c. to BJ. Hs.{Lord Ernest Hives - Chair} X1333 DA{Bernard Day - Chassis Design}1/M3.5.27. ROAD SPRINGS (CLIPS) X8410 X3854 X5410 With reference to the riveted-on clip which you are asking for, R.{Sir Henry Royce} wishes to make one which exactly resembles the present Woodhead clip, but is attached to the plate through a riveted on cross piece. He does not care for the type in which the clip itself is riveted to the plate, and a bolt and distance piece clamp the upper ends together. We send herewith N.sch.2406 and 2407., shewing respectively the proposals for the 40/50 and 20 HP., front springs. Clips for the rear springs of both cars should be prepared on similar lines, these drawings being intended as guides. DA.{Bernard Day - Chassis Design} | ||