Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Proposed experimental method for stiffening the front scuttle armature using a cast dash.

Identifier  ExFiles\Box 14\8\  Scan014
Date  17th July 1926
  
To BY.{R.W. Bailey - Chief Engineer} from DA.{Bernard Day - Chassis Design}
c. to BJ. Hs.{Lord Ernest Hives - Chair}

(X7380)

DA{Bernard Day - Chassis Design}3/M17.7.26.

SCUTTLE ARMATURES WITH CAST DASHES. X. 7380 X. 7500
X. 8500 X. 7940

Herewith we send N.sch.2236 shewing the proposed method of stiffening the front scuttle armature xxxx when a cast dash is used.

The proposal is necessarily rather experimental and it is intended to fit the scuttle on 12-EX before it goes to France in order that the method can be tested.

The doubtful point is the general reduction in thickness due to the use of the cast dash.

We also suggest that a set of pieces of the subframe type should be made for the body for EAC. 7. which is now in process of being ordered.

[Watermark: MADE AT CROXLEY]

DA.{Bernard Day - Chassis Design}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙