Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Alternative method for centralised chassis spring lubrication.

Identifier  ExFiles\Box 27\1\  Scan318
Date  10th January 1930
  
BY.{R.W. Bailey - Chief Engineer} FROM DA.{Bernard Day - Chassis Design}
C. to SG.{Arthur F. Sidgreaves - MD} HS.{Lord Ernest Hives - Chair}

X3806

DA{Bernard Day - Chassis Design}3/M10.1.30.

CENTRALISED CHASSIS LUBRICATION. X.3806
X.840
X.1148

We send herewith N. sch. 3011. shewing an alternative method of conveying oil for the spring lubrication by means of an annulus inside the pins made by inserting a thin piece of tube.

In case of the rear axle this can be done by increasing the length of the coil and slightly reducing its dia., but if such an arrangement is needed on the front axle it will be necessary we think to open out the hole in the spring eye. We anticipate however that the original scheme in the top of the pin will probably work.

DA.{Bernard Day - Chassis Design}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙