Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Letter from Donald Sessions & Co Ltd regarding modifications and improvements to jacks.

Identifier  ExFiles\Box 26\3\  Scan227
Date  21th June 1933
  
CONTINUATION
DONALD SESSIONS & COMPANY LTD.

- 2 -

Messrs. Rolls-Royce Ltd.
21st June, 1933.

apparent that we shall have to retain the old gearing, as far as the jack is concerned, even if we produce a right and left hand threaded screw in the Jacks.

I am now working on the lines of incorporating a device on the handle which will enable two speeds to be obtained for operating the jack and I hope to be able to put a proposition before you in the near future.

In the meantime, I have instructed our Works to put in hand a modified cross-bar to accommodate the larger speed knob which you tried at the Works on Monday.

With regard to new seasons Jacks for the above Chassis, we will increase the lift by 3/4" on these and do everything possible to decrease the weight.

I must thank you very much for the kind co-operation you give us when we visit your Works and you may rest assured we shall do everything in our power to supply you with Jacking Systems which, in your opinion, are one-hundred percent jobs.

Yours faithfully,

For DONALD SESSIONS & COMPANY LIMITED.

Donald Sessions
Managing Director.

DWS/IKS.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙