From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Standardisation and drilling of the 40/50 HP engine foot.
Identifier | WestWitteringFiles\E\June1920\ Scan34 | |
Date | 23th June 1920 | |
To DA{Bernard Day - Chassis Design}- from E.{Mr Elliott - Chief Engineer} Copy to C.L. H.S. E.F.C. ORIGINAL EE/021/6/20. RECEIVED 23 JUN 1920 X.4062 RE 40/50 H.P. ENGINE FOOT. With reference to your scheme N.364, would you kindly proceed to effect standardisation as no other point arises from Mr. Royce with the exception of whether the upper dowel pin holes for the steering pad stem should have normal drilling. Mr. Royce says that Mr. Willis should decide this point. The holes can be made at right angles to the taper surface of the stamping, and the drilling jig can be made to rock over to accommodate the angle of the hole. E.{Mr Elliott - Chief Engineer} | ||