Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Redesign of a chassis hand pump bracket, with a suggestion to consider die casting to reduce cost.

Identifier  ExFiles\Box 38\6\  Scan185
Date  23th July 1919
  
COPY.
R.R. 235 a (200 T) (S.F. 103. 25-10-18) G.{Mr Griffiths - Chief Accountant / Mr Gnapp} 2241.
To Da.{Bernard Day - Chassis Design} from Bn.{W.O. Bentley / Mr Barrington}
c. to By.{R.W. Bailey - Chief Engineer}
c. to EH.
Bn{W.O. Bentley / Mr Barrington}5/W23.7.19.
23rd. July 1919.
(1)
X.342440/50 CHASSIS - RE NEW DESIGN OF BRACKET FOR HAND PUMP.
X 3444
I believe you are re-designing the bracket for the hand pump, so that the pump may be dropped deeper into the instrument board. Will you please at the same time review very carefully the design of this bracket to enable the part which is in view to be finished with a good surface but without the expense of hand work. It might be worth while considering the use of die casting if the design can be suitably modified.
Bn.{W.O. Bentley / Mr Barrington}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙