From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Design modifications and drawings for the Goshawk 11 undershield.
| Identifier | WestWitteringFiles\I\May1922\ Scan25 | |
| Date | 10th May 1922 | |
| To -Ba. from K.{Mr Kilner} c. to Cj. c. to Mor. c. to -By c. to Hs.{Lord Ernest Hives - Chair} ✓ c. to --- ORIGINAL RECEIVED MAY 10 1922 R1/M9. 5. 22. GOSHAWK 11. UNDERSHIELD. X4272 We send you herewith drawing No. Lec 1567 shewing the following 4 points:- (1) Stronger attachment of side plates to frame. (2) Hole and mudguard for water drain. (3) Ribs to prevent drumming on undershield front plates. (4) Radiator overflow guide. In connection with No. 2, this drawing at the moment shews the original inlet elbow on the pump but you will recollect that we are probably having a larger elbow here. In connection with No. 1, We shew a scheme of larger clamping washers for securing the aluminium plate. We understand you have already instructed these. This is the simplest scheme we could have but if it does not stand, we must use still larger washers in steel riveted to the aluminium. We also send you drawing No. Lec 1562 shewing the water drain cock altered for extension. We leave it to you to decide whether it is cheaper to buy existing cocks and bore them out or have cocks made with cylindrical pattern boss for the pipe. K.{Mr Kilner} | ||