From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification sheet detailing modifications for Peregrine chassis components.
| Identifier | ExFiles\Box 1\8\ B001_X100 Engine Chassis-page086 | |
| Date | 20th September 1932 | |
| (2) scheme for the sliding joint. These modifications are being dealt with. (7) Clutch. Peregrines 2 and 3 have been instructed with clutches similar to the first chassis except for slight modifications to reduce noise, etc. We are awaiting the final scheme for the clutch from WW. (8) Gearbox. Peregrine chassis following Nos. 2 and 3 will be arranged to take the automatic control for the shock dampers. This involves some slight alteration to the gearbox. (9) Shock Dampers. Peregrine 2 will be fitted with the standard 20/25 shock dampers, and with front axle control. Peregrine 3 will have the J.3. type of damper, also with front axle control. Subsequent chassis will be like Peregrine 3, with the addition of automatic control for the degree of damping, as mentioned in item (8). (10) Brakes. Peregrine 2 and 3 will be instructed like the first chassis with direct braking on the rear only; subsequent chassis will have direct braking on all four wheels, which it is expected will overcome the various troubles with knocks and thumps. (11) Central Lubrication. This will be instructed on Peregrines 2 and 3 similar to the first chassis. A modified scheme is in hand for substituting Luvax fittings in place of the present banjos with sweated joints. (12) Brake and Gear Levers. These will be the same as on the first chassis of Peregrine 2 and 3, except for the modification in connection with stopping the binding effect of the | ||