From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Dimensions of levers, with a diagram showing the cross-section measurements.
| Identifier | ExFiles\Box 80\1\ scan0144 | |
| Date | 18th July 1914 | |
| R.{Sir Henry Royce} 235a (150 H) (W.W. 138. 17-6-14) G.{Mr Griffiths - Chief Accountant / Mr Gnapp} 0626. J.{Mr Johnson W.M.} for R.{Sir Henry Royce} other + .015 in width and + .060 in thickness. I suggest in view of the above result that these are all right. If 58 NA{Mr Nadin} is available, I wondered if you would kindly get someone to measure the levers at the section close to the ball end boss. The drawing section is [Diagram of a rectangular cross-section with dimensions .437 (height) and .875 (width)] We suggest that if they are well up to this, they are all right. We are, however, obtaining levers of the increased section as early as possible. Da.{Bernard Day - Chassis Design} Da.{Bernard Day - Chassis Design} | ||