Rolls-Royce Archives
| Identifier | Entry | ||
| scan0001 | Comparing the coachwork designs of the Myth and Rover cars. | ||
| View original record | SECRET 1030 TO. Sg from Ev. c. Rm c. Rm/Grys Ev.1/22.11.39 704 RE MYTH COACHWORK Attached herewith is a print of PL.56. a 1/16th scale drawing of the 10 H.P. Rover Car made from dimensions taken from… | ||
| scan0002 | Confidential letter to coachbuilder Park Ward & Co. Ltd. regarding the construction of the 'Myth' experimental car. | ||
| View original record | 1030 Copy Rm. CONFIDENTIAL. Ev.4/EH. 18th. October 1939. Messrs. Park Ward & Co. Ltd., 473, High Road, Willesden, N.W.10. 704 For the attention of Mr.C.Ward. Dear Sir, Re. Myth Chassis. As promised to… | ||
| scan0003 | Letter from the Chassis Design Office requesting proposals for coachwork artistry and a preliminary cost analysis. | ||
| View original record | Ev.4/EH. (Cont'd). (2) If you have any suggestions regarding the coachwork artistry, we would be glad to receive a 1/16 scale scheme of your proposals. When making suggestions, we suggest that you… | ||
| scan0004 | Pedal and seating position for the 'Myth' monocoque body project. | ||
| View original record | 1030 To Rm. c. to Rm/HH. c. to Rm/EAG. Ev.6/JH.19.7.40. 704 Myth Pedals. In order to enable the project of the Myth Monocoque body to go ahead, we have made a project of the pedals and seating… | ||
| scan0005 | Meeting notes detailing the basic dimensions and features for the 'Myth' car model. | ||
| View original record | tile 10804 1021 Rm/EAG. from Rm. c. Ev. Rm.9/ML.5.6.40. 704 NOTES ON A DISCUSSION HELD ON 2.6.40. re MYTH. The following basic dimensions for Myth were fixed at a discussion held at the Clan Foundry… | ||
| scan0006 | Specifications for chassis units, rear track, and rear road springs. | ||
| View original record | Cont'd. Page 2. Rm.9/HL.3.6.40. All particulars of the chassis units will be provided by Ev. and a general layout of the body should be proceeded with forthwith. Rear Track. This will be decided upon… | ||
| scan0007 | Secret memo regarding the finalisation of the 'Myth' body dimensions and an attached competitive analysis chart. | ||
| View original record | 1030 SECRET. TO RH. from Ev. c. to Rm/FD. c. to Rm/FJH. c. to Rm/cas. c. to Ev/JD. Ev.8/JH.8.3.40. re Myth. FJH 704 Although we have provisionally finalised the Myth body dimensions as being those of… | ||
| scan0008 | The procurement of materials for the Myth monocoque body design. | ||
| View original record | 1030 Rm/EAG. from Rm. MATERIAL FOR MYTH MONOCOQ DESIGN. Rm.10/JMS.25.7.40. 704 We have the opportunity of laying in sufficient material to make the Myth body. We have to purchase the material now.… | ||
| scan0009 | Recruitment of body design draughtsmen for the 'MYTH' project. | ||
| View original record | 704 To: Rm. 2.8.40 784 BODY DESIGN PERSONNEL. -------------------- Regarding the additional Body Draughtsmen who are required for MYTH, and referring to the two men with whom we are in correspondence,… | ||
| scan0010 | List of deep drawing auto-body steel sheets required for project 'MYTH'. | ||
| View original record | STEEL REQUIRED FOR MYTH. Deep Drawing Auto-body Sheet. Lis 2 Sheet 72 x 48 x .048 (Heelplate Hinge Reinf: Trunk Reinf: etc.) 4 " 72 x 48 x .040 (Underframe, Crossmember, Monopiece, Door opening frame)… | ||
| scan0011 | Particulars of material required for car work. | ||
| View original record | Les. from Rm. Rm.4/ML.3.8.40. Herewith particulars of the material required for car work. Rm. 704 | ||
| scan0012 | List of steel requirements for the 'Myth' project, detailing deep drawing auto-body sheets. | ||
| View original record | STEEL REQUIRED FOR MYTH. Deep Drawing Auto-Body Sheet. 2 Sheet 72 X 48 X .048 (Heelplate, Hinge reinf: Trunk reinf: etc.,) 4 " 72 X 48 X .040 (Underframe, Crossmember, Monopiece, Door opening frame.)… | ||
| scan0013 | Quotation from Twining Models Ltd. for a model car exterior. | ||
| View original record | TWINING MODELS LTD. ARTISTS & MODEL MAKERS. SPECIALISTS IN MODELS TO SCALE FOR EDUCATIONAL AND DEMONSTRATION PURPOSES, EXHIBITION AND OTHER FORMS OF PUBLICITY. REPRODUCTIONS IN MINIATURE OF FACTORIES,… | ||
| scan0014 | Letter from Twining Models Ltd. regarding quotations and requesting further particulars for a model car. | ||
| View original record | TWINING MODELS LTD. ARTISTS & MODEL MAKERS. DIRECTORS - E.W.TWINING, GILBERT TWINING, E.H.CLIFTON SPECIALISTS IN MODELS TO SCALE FOR EDUCATIONAL AND DEMONSTRATION PURPOSES, EXHIBITION AND OTHER FORMS… | ||
| scan0015 | Quotation from Twining Models for the exterior details of a model car. | ||
| View original record | C O P Y. TWINING MODELS Pike Lane, NORTHAMPTON. Ref. AF/EHC. August 8th, 1940. QUOTATION B. To: Messrs. Rolls-Royce Ltd. For: MODEL CAR EXTERIOR DETAIL ONLY Scale: To Blue Print Specification:… | ||
| scan0016 | Letter from Twining Models requesting further particulars to provide quotations for model cars. | ||
| View original record | C O P Y. TWINING MODELS Pike Lane, NORTHAMPTON. Reference AF/EHC. August 8th, 1940. Messrs. Rolls-Royce Ltd., Clan Foundry, BELPER. For the attention of E.A.G. Dear Sir, With reference to Mr. E.A.… | ||
| scan0017 | Quotation from Twining Models Ltd. for a model car exterior. | ||
| View original record | TWINING MODELS LTD. ARTISTS & MODEL MAKERS. SPECIALISTS IN MODELS TO SCALE FOR EDUCATIONAL AND DEMONSTRATION PURPOSES. EXHIBITION AND OTHER FORMS OF PUBLICITY. REPRODUCTIONS IN MINIATURE OF FACTORIES,… | ||
| scan0018 | Quotation from Twining Models for a Model CQR exterior detail only. | ||
| View original record | C O P Y. 104 TWINING MODELS Pike Lane, NORTHAMPTON. Ref. AF/EHC. August 8th, 1940. QUOTATION A. To: Messrs. Rolls-Royce Ltd. For: MODEL CQR EXTERIOR DETAIL ONLY. Scale: To Blue Print. Specification:… | ||
| scan0019 | Letter to The Pressed Steel Company regarding a missing section in a blueprint for a monopiece frame construction. | ||
| View original record | Rm/EAG/Dn3 10th August 1 9 4 0 The Pressed Steel Company Ltd, C O W L E Y, Oxford. ---------------------- Dear Sirs, Attention of Mr Maton. We thank you for the blue print of sketches of your latest… | ||
| scan0020 | Staffing and modelling for the 'MYTH' pressed steel body project. | ||
| View original record | Hs. from Rm. Rm.2/ML.12.8.40. 104 PRESSED STEEL BODY "MYTH". The original project with regard to this job was that Mr. Green would work with the Pressed Steel Company, who would provide all the… | ||
| scan0021 | Letter to Twining Models regarding a quotation and specifications for model cars. | ||
| View original record | Rm/EAG1/Dn 12th August, 1940. 704 E. H. Clifton, Esq., Twining Models, Pike Lane, NORTHAMPTON. Dear Sir, We thank you for your letter of the 7th instant, enclosing quotations for model cars. Will you… | ||
| scan0022 | Letter from Twining Models Ltd. regarding the construction of a model, referencing quotations and design details. | ||
| View original record | TWINING MODELS LTD. DIRECTORS:- E.W.TWINING, GILBERT B. TWINING, F.H.CLIFTON. ARTISTS & MODEL MAKERS. SPECIALISTS IN MODELS TO SCALE FOR EDUCATIONAL AND DEMONSTRATION PURPOSES, EXHIBITION AND OTHER… | ||
| scan0023 | Letter from Twining Models concerning an order for a model with a detachable floor and chrome plating. | ||
| View original record | COPY. TWINING MODELS Pike Lane, NORTHAMPTON. Attention of E.A.G. Messrs. Rolls-Royce Ltd. Clan Foundry, BELPER. August, 13th 1940. Dear Sirs, We thank you for your favour of the 12th instant. The work… | ||
| scan0024 | Inquiry to Triplex Safety Glass Ltd. regarding the supply and cost of curved glass for car back windows. | ||
| View original record | FILE 704 Rm/BAG/Dn 13th August 1 9 4 0. MYT H - Follett, Esq., Triplex Safety Glass Ltd, 1, Albermarle Street, Piccadilly, LONDON, W1. Dear Mr Follett, I understand that your Company have been… | ||
| scan0025 | Letter from Twining Models confirming work on a model, detailing specifications, delivery, and enclosing a rough tracing. | ||
| View original record | COPY. TWINING MODELS Pike Lane, NORTHAMPTON. Attention of E.A.G. Messrs. Rolls-Royce Ltd. Clan Foundry, BELPER. August, 13th 1940. Dear Sirs, We thank you for your favour of the 12th instant. The work… | ||
| scan0026 | Letter to Messrs. Twining clarifying design specifications for vehicle wings, grill, windows, panels and wheels. | ||
| View original record | FILE MYTH 704 Rm/EAG.5/ET. 14th August 1940. Messrs. TWINING, Pike Lane, NORTHAM TON. Dear Sirs, In reply to your letter of the 12th instant enclosing rough sketch, we should like to point out the… | ||
| scan0027 | Letter arranging an order with Twining Models for a model car at a price of £69.10.0. | ||
| View original record | MYTH 704 To: "Rm". --------- Rm/EAG2/Dm14.8.40 re Model Car. ------------- Will you please arrange for an order to be sent to: E. H. Clifton, TWINING MODELS, Pike Lane, NORTHAMPTON, to make One Model… | ||
| scan0028 | Letter from Twining Models confirming details for a model order. | ||
| View original record | COPY. 704 TWINING MODELS Pike Lane, NORTHAMPTON. Attention of E.A.G. . Messrs. Rolls-Royce Ltd. Clan Foundry, B E L P E R. August, 13th 1940. Dear Sirs, We thank you for your favour of the 12th… | ||
| scan0029 | Requesting an order to be placed with Twining Models for the creation of a model car. | ||
| View original record | 704 To: "Rm". Rm/EAG2/Dn14.8.40 re Model Car. Will you please arrange for an order to be sent to: E. H. Clifton, TWINING MODELS, Pike Lane, NORTHAMPTON, to make One Model Car, as per their Quotation… | ||
| scan0030 | Letter clarifying design specifications for a car body in response to a sketch. | ||
| View original record | Rm/EAG.5/ET. 14th August 1940. Messrs. TWINING, Pike Lane, NORTHAMPTON. Dear Sirs, In reply to your letter of the 12th instant enclosing rough sketch, we should like to point out the following items… | ||
| scan0031 | Internal request to issue an official order to E.H. Clifton, Twining Models for one model car. | ||
| View original record | 1030 Roy. from Rm. Rm.7/ML.17.8.40. 704 Will you please issue an official order to :- E.H.Clifton, Twining Models, Pike Lane, Northampton. to make one model car as per their quotation "B" at a price… | ||
| scan0032 | Non-chargeable samples of windscreen channeling and regulators from a supplier. | ||
| View original record | 704 To: Les. ----- Rm/HAG3/Dn19.8.40 Perfecta Motor Equipment, Birmingham, are sending us samples of Windscreen Channeling, and Windscreen Regulators. These will not be chargeable, as the latter will… | ||
| scan0033 | Letter to Perfecta Motor Equipment requesting samples of Windscreen Channeling and Windscreen centre Regulators. | ||
| View original record | MYTH YOU Rm/EAG/Dn4 19th August 1940. Perfecta Motor Equipment, Excelsior Works, Oxford Street, BIRMINGHAM, 5. For the attention of Mr Bach. Dear Sirs, Confirming our telephone conversation this… | ||
| scan0034 | Letter thanking Mr. Percival for promptly sending prints required for comparative sizes and discussing recent wartime excitement. | ||
| View original record | Rm/EAGI/Dn J. Percival, Esq., 216, Broad Lane, COVENTRY. Dear Percival, Many thanks for so promptly sending the prints. These will give me all the particulars I require, as I only wanted them for… | ||
| scan0035 | Letter to a supplier regarding the specifications for sample screen regulators and channel sections. | ||
| View original record | Perfecta Motor Equipment, Excelsior Works, OXFORD Street, BIRMINGHAM, 5. For the attention of Mr Bach. Dear Sirs, We thank you for the sample screen regulators and channel sections. Regarding the… | ||
| scan0036 | Letter from Triplex Safety Glass Co. Ltd. regarding the supply and cost of bent toughened glass. | ||
| View original record | CONTRACTORS TO HIS MAJESTY'S GOVERNMENT "Triplex" Safety Glass Co. Ltd. Regd. DIRECTORS: GRAHAM CUNNINGHAM, LL.B. LORD STANMORE, P.C., K.C.V.O. WESTCOTE R. LYTTLETON. MISS D. MCDUELL, F.C.I.S. A.… | ||
| scan0037 | To 'Les' regarding a non-chargeable matter with Perfecta Motor Equipments Ltd. | ||
| View original record | MYTH To: "Les". Rm/EAG4/Dn22.8.40 With reference to the attached Advice G./3581 from Perfecta Motor Equipments Ltd, this matter has been dealt with by my Rm/EAG3/Dn19.8.40, and will not be chargeable.… | ||
| scan0038 | Letter to Triplex Safety Glass Co. Ltd. discussing the supply and pricing of bent toughened glass for an experimental body. | ||
| View original record | Rm/EAG2/Dm 22nd August, 1 9 4 6. J. W. Follet, Esq., "Triplex" Safety Glass Co.Ltd, 1, Albermarle Street, Piccadilly, L O N D O N. W1. Dear Mr Follett, Many thanks for your letter of the 21st inst.,… | ||
| scan0039 | Notes from a discussion held on 24.08.1940, outlining a programme for the 'Myth' project. | ||
| View original record | Rm/EAG. from Rm. c. Ev. c. Rm/GB. Rm.18/ML.25.8.40. NOTES ON A DISCUSSION re MYTH. Held on 24.8.40. A discussion was held to outline a programme for the Myth. 1. FRONT SUSPENSION. Rm/EAG will give Ev.… | ||
| scan0040 | Meeting note discussing design staff changes and postponing the 'Myth' axle design. | ||
| View original record | - 2 - Cont'd. on the engine. Rm/GB and Mr. Cantrill will supplement Ev's Design Staff from now onwards. Since we have a Hardy Spicer axle for this car we think that trying a Rolls Royce Myth axle… | ||
| scan0041 | Letter to Pressed Steel Company Ltd discussing the design and requesting a cost estimate for sharpening the corners of a small car body. | ||
| View original record | Rm/EAG/Dn 26th August 1 9 4 0. PRESSED STEEL COMPANY Ltd, Cowley, OXFORD. For the attention of Mr Maton. Dear Sirs, Regarding the shape at the rear end of the small body, which we recently discussed… | ||
| scan0042 | Letter to Twining Models confirming an agreement to suspend work on a model car. | ||
| View original record | 1D3k 704 Rm FAG2/Dn 26th August 1 9 4 0. E. H. Clifton, Esq., TWINING MODELS, Pike Lane, NORTHAMPTON. Dear Sir, re Model Car Confirming our telephone conversation this morning with reference to the… | ||
| scan0043 | Follow-up letter to Mr. Eaton from Pressed Steel Company Ltd. concerning drawing curves. | ||
| View original record | 704 Da/ECG/DA 26th August 1940. PRESSED STEEL COMPANY Ltd., COWLEY, OXFORD. MYTH No1030 Dear Mr Eaton, Referring to our telephone conversation last week concerning drawing curves, I should be glad to… | ||
| scan0044 | Covering note listing blueprints sent for a Body Underframe, Petrol Tank, and Rear Engine Mounting. | ||
| View original record | To "Ey" from Rm/RG c: "Rm" Herewith please find Blueprints as follows: RB.10001. Scheme showing front of Body Underframe RB.10002. Petrol Tank RB.10003. Scheme showing rear of Body Underframe… | ||
| scan0045 | The decision to modify the 'Myth' project from monocoque construction due to wartime constraints. | ||
| View original record | Ev. from Rm. c. Rm/EAG. c. Rm/EAG/RCG. c. Ev/JD. d. Rm/Wym. c. Rm/GB. [Handwritten: File Myth] [Handwritten: 704] Rm.13/ML.5.9.40. MYTH MONOCOQUE. A discussion was held on Wednesday, September 4th, on… | ||
| scan0046 | Organizational chart for the staff required in the Body Drawing Office to produce new and special bodies. | ||
| View original record | 9-34 BODY ENGINEER. CHIEF DRAUGHTSMAN DRAUGHTSMAN FOR SPECIALS SPECIFICATION ARTIST TYPIST LAYOUT CHECKER PROGRESS & LIASON. SPECIFICATION JUNIOR. DETAILER DETAILER DETAILER DETAILER. STAFF REQUIRED… | ||
| scan0047 | Black and white photograph showing the side profile of a saloon car. | ||
| View original record | 7704 | ||
| scan0048 | Photograph of a scale model of a saloon car on a draped display stand. | ||
| View original record | N. No. 1256 7404 | ||
| scan0049 | Side profile photograph of a dark-coloured four-door saloon car with enclosed rear wheels. | ||
| View original record | 704. 1030 | ||
| scan0050 | Outlining two design points for the 'Myth' car body before finalisation. | ||
| View original record | Rm/EAG. from Rm. c. EV. 704 Rm.8/ML.9.9.40. MYTH BODY. There are two points which must not be overlooked before the Myth body design is finalised. These are :- 1. The bonnet line should be such that,… | ||
| scan0051 | Development of a small car with monocoque construction as a modern alternative to the Myth model. | ||
| View original record | JUNIOR RANGE Rm/EAG. from Rm. c. Ev. c. Rm/CB. Rm.10/ML.9.9.40. 704 MONOCOQUE CONSTRUCTION. The fact that we are playing safe on the first Myth by giving it a frame, does not mean that we are… | ||
| scan0052 | Letter requesting the return of a specification and seeking advice on the best quick lift window regulators. | ||
| View original record | 1036 MYTH EXPERIMENTAL DEPARTMENT. Rm/EAG.4/ET. 10th September 1940. 704 C. W. WARD, Esq., Messrs. Park Ward, & Co. Ltd., 473, High Road, Willesden, LONDON N.W. 10. Dear Mr. Ward, I should be much… | ||
| scan0053 | Letter to C.W. Ward of Park, Ward & Co., Ltd. requesting the return of a specification and seeking advice on quick-lift window regulators. | ||
| View original record | New File Park Ward COPY. Rm/EAG.4/ET Experimental Dept 10th Septr 1940. 704 C. W. Ward, Esq., Messrs Park, Ward & Co., Ltd, 473, High Road, Willesden, L O N D O N. N.W.10. Dear Mr Ward, I should be… | ||
| scan0054 | Letter requesting the return of a specification and seeking an opinion on quick-lift window regulators. | ||
| View original record | COPY. Experimental Dept 10th Septr 1940. 704 Rm/EAG.4/ET C. W. Ward, Esq., Messrs Park, Ward & Co., Ltd, 473, High Road, Willesden, L O N D O N, N.W.10. Dear Mr Ward, I should be much obliged if you… | ||
| scan0055 | Letter to Park, Ward & Co. requesting the return of a specification and asking for an opinion on quick-lift window regulators. | ||
| View original record | COPY. Experimental Dept 10th Septr 1940. 704 Rm/EAG.4/ET C. W. Ward, Esq., Messrs Park, Ward & Co., Ltd, 473, High Road, Willesden, LONDON, N.W.10. Dear Mr Ward, I should be much obliged if you could… | ||
| scan0056 | Meeting notes on a discussion about the Myth model's body, bonnet, and radiator design. | ||
| View original record | 704 Rm/EAG. from Rm. c. Ev. Rm.17/ML.13.9.40. NOTES ON A DISCUSSION HELD ON MYTH BONNET AND RADIATOR, ON 12.9.40. A discussion was held to consider the progress made on Myth body, bonnet and radiator.… | ||
| scan0057 | Meeting notes discussing vehicle component specifications including the frame, body mounting, trafficators, and other fittings. | ||
| View original record | - 2 - Cont'd. Rm.17/ML.13.9.40. 5. FRAME. Rm/EAG/RCG. and Ev/JD. both produced schemes of suggested frames for the Myth and it was clear that there was very little difference between the two. It was… | ||
| scan0058 | The accommodation of wireless controls and the instruments on the fascia board. | ||
| View original record | - 3 - Cont'd. Rm.17/ ML.13.9.40. Consideration will have to be given as to how the wireless controls will be accomodated on the instrument board. 12. INSTRUMENTS. The number and type of instruments to… | ||
| scan0059 | Letter to Perfecta Motor Equipment Ltd. regarding sample windscreen regulators and invoicing. | ||
| View original record | 1030 MYTH 704 EXPERIMENTAL DEPARTMENT. Rm/SAG.3/ET. 17th September, 1940. PERFECTA MOTOR EQUIPMENT, Ltd., Excelsiot Works - Oxford Street, BIRMINGHAM. 5. For the attention of Mr. Bach. Dear Sirs,… | ||
| scan0060 | Letter discussing design considerations for a potential small 10 HP car, specifically whether it should be 2-door or 4-door. | ||
| View original record | MYTH 1030 Rm/AA.2/ET. 21st September 1940. 704 T.R. Lloyd, Esq., Messrs. E.D. Abbott Ltd., FARNHAM, Surrey. My dear Trevor, This is not an answer to your letter, which I hope to deal with properly… | ||
| scan0061 | The return of a quarter-scale model man after a copy was made. | ||
| View original record | To Ev/JD. from Rm/RG. Rm/RG.2/ET.24.9.40 Returned herewith your quarter scale model man. We have now made a copy of this model. Thanks for the loan thereof. Rm/RG. 704 | ||
| scan0062 | Letter discussing the possibility of a cheaper post-war 10 HP model, seeking sales advice on a 2-door vs 4-door configuration. | ||
| View original record | MYTH 1030 Em/AA.3/ET. J.P. GAYFORD, Esq., Haslemere Motor Company, Woodbridge Road, GUILDFORD, Surrey. 21st September 1940. 704 Dear Mr. Gayford, How are you? I fear you have been having a trying time… | ||
| scan0063 | Body programme and drawings for the Myth and Silver Dawn models. | ||
| View original record | 1030 Rm/EAG. from Rm. c. Ev. The Myth Rm.18/ML.24.9.40. 704 re BODY PROGRAMME. Confirming our talk with you yesterday, we should like a full-size, front elevation drawing of the Myth with the Rolls… | ||
| scan0064 | Dashboard arrangement and components for the 'Myth' vehicle. | ||
| View original record | 10/32 To Ev. from Rm. Copy to EAG. 704 Rm.9/BT.4.10.40. Re: DASHBOARD. This is to confirm a conversation in which I asked you to scheme what you consider to be the best arrangement of dashboard for… | ||
| scan0065 | The layout of the frame, transmission, and coachwork for the 'Myth' vehicle. | ||
| View original record | 1030 MYTH To Rm/BAG. from Ev. c. to Rm. c. to Rm/GB. re Myth Coachwork. Today we have issued to Rm. the layout of frame, transmission and springs etc. for Myth. The scheme for Myth with the M.40 power… | ||
| scan0066 | Bumper designs for Bentley type fronts. | ||
| View original record | Cont'd. B.MC/S.VM except for the over-riders and that for other Bentley type fronts will resemble the Bumper on Cresta. We shall send to you our proposals for actual bumperdesigns in due course. | ||
| scan0067 | Design drawing showing the side elevation of a car body and underframe. | ||
| View original record | ROLLS-ROYCE, LTD 22 SEP 1938 DERBY. ARRGT BODY & UNDERFRAME ~ MYTH. 1/4 SCALE R.H. SIDE L.H. SIDE RB.19001. | ||
| scan0068 | Design modifications for the dashboard, oil cleaner, and air silencer to accommodate the M.40 and BM.40 models. | ||
| View original record | [Handwritten: 1030] [Handwritten: 704] To Rm. from Ev. c. to Rm/EAG. c. to Rm/FJH. c. to Rm/HH. EV.4/JH.9.10.40. re Dashboard Myth. On PL.365, we shew a project of the small depression in the base of… | ||
| scan0069 | Design and clearance issues of a dashboard pressing for the M.40 and BM.40 engines. | ||
| View original record | To Rm. from Ev. c. to Rm/EAG. c. to Rm/FJH. c. to Rm/HH. re Dashboard Myth. On PL.365, we shew a project of the small depression in the base of the dashboard pressing, and the scenery around it. The… | ||
| scan0070 | Decision to remove the 'Spinney' ventilator from the experimental 'Myth' model. | ||
| View original record | 38 704 To Rm/BAG. from Rm. Copy to Ev. Rm.10/ET.14.10.40. VENTILATION OF THE MYTH. Confirming our discussion of this morning, we consider that, as on the Myth we have a sunshine roof, an opening… | ||
| scan0071 | Confidential memorandum discussing the design progress and challenges of the 'Myth' car project, specifically regarding the frame and body structure. | ||
| View original record | 1030 To Rm. CONFIDENTIAL. Ev.1/JH.23.10.40. 704 re Myth. The first project for the Myth body and frame is dated September 2nd. 1939 and is PD.500. This was followed almost immediately by a finalised… | ||
| scan0072 | Confirming the handover of drawing PL.374 for the Myth Front Wings and requesting prints. | ||
| View original record | 1030 704 To Rm. from Ev. c. to Rm/HH. c. to Rm/EAG. SECRET. Ev.4/JH.24.10.40. re Myth Front Wings. We confirm that we handed to Rm/EAG. several days ago the original of PL.374 shewing the contour of… | ||
| scan0073 | Design observations on a Chevrolet, suggesting a door-activated switch light for a new project. | ||
| View original record | Rm/EAG. from Rm. Rm.7/ML.28.10.40. [Handwritten annotations: 'copy' (struck through, top left), 'Myth 1030 copy to...' (struck through, center), 'Y04' (top right)] I was interested to note that the… | ||
| scan0074 | Letter to Messrs. TWINING confirming a telephone conversation about a visit concerning a model car. | ||
| View original record | ? 1030 / 1021 or Rm/EAG.4/ET. 1st November 1940. 704 Messrs. TWINING, Pike Lane, NORTHAMPTON. Attention of Mr. Clifton. Dear Sirs, Confirming our telephone conversation of yesterday afternoon sith… | ||
| scan0075 | List of materials required to construct one car body, including wings, bonnet, and radiator shell. | ||
| View original record | 1030 Rm/EAG. 2.11.40. 704 M Y T H. ---------- Material required to construct one body, including the following items:- Body complete, Wings, Bonnet and Radiator Shell: 7 Sheets 72 x 48 x .036 9 " 72 x… | ||
| scan0076 | List specifying quantities and dimensions of deep drawing auto-body steel sheets required for the 'MYTH' project. | ||
| View original record | 1030 STEEL REQUIRED FOR MYTH. Deep drawing Auto-Body Sheet. Myth 704 2 Sheet 72 x 48 x .048 (Heelplate Hinge Reinf: Trunk Reinf: etc.,) 4 " 72 x 48 x .040 (Underframe, Crossmember, Monopiece, Door… | ||
| scan0077 | Outlining points of agreement on the design of 'Myth' coachwork. | ||
| View original record | To Rm/EAG. from Ev. c. to R. c. to Ev/JD. c. to Rm/EAG/Mr. Greene. c. to Rm/GB. re Myth Coachwork. This memo. is intended to put on record points of agreement reached during a discussion on the design… | ||
| scan0078 | Page 2 of a memo detailing specifications for the 'Myth Model', including wheel and tyre options. | ||
| View original record | -2- Ev.3/JH.4.11.40. Cont'd. scuttle side panel on the lines of the Sunbeam-Talbot '10'. The Myth Model. 1. Ev. has completed the dimensioned scheme of the Myth Frontal Appearance and will issue it.… | ||
| scan0079 | Letter to Messrs. Twining Ltd. confirming arrangements and specifications for the construction of a model car. | ||
| View original record | COPY. Rm/EAG.6/LT. Messrs. Twining Ltd., Pike Lane, NORTHAMPTON. 6th November, 1940. Attention of Mr. Clifton. Dear Sir, Confirming your visit to our Works yesterday with reference to the model car… | ||
| scan0080 | Requesting up-to-date drawings for the 'Myth' body and a section view for a side lever mechanism. | ||
| View original record | 1030 To Rm/EAG. from Ev. c. to Rm. Myth copy in 1021 Ev.17/JH.7.11.40. 704 re Coachwork. We are suffering rather badly from lack of knowledge of the Myth body. Such drawings as we have are very out of… | ||
| scan0081 | Front wing clearances for the 'Myth' model, considering different tyre sizes and wheel positions. | ||
| View original record | To Rm. from Ev. c. to Rm/EAG. c. to Rm/HH. Ev.8/JH.7.11.40. re Front Wing Clearances - Myth. Attached to Rm/HH's. copy of this memo. is PL.396 which shews the Myth front wheels on full lock and full… | ||
| scan0082 | Letter to Messrs Twining Ltd regarding the provision of sections for a Model Four Light Body. | ||
| View original record | 1030 Rm/EAG.5/ET 7th Novr 1940. 704 Messrs Twining Ltd, Pike Lane, N O R T H A M P T O N. Attention of Mr Clifton. Dear Sirs, MODEL FOUR LIGHT BODY. ------------------- We are sending you herewith the… | ||
| scan0083 | Prints of a vertical section and plan of the Myth body. | ||
| View original record | 1030 To Ev. from Rm/EAG. Rm/EAG.B/ET.11.11.40. Herewith please find prints of vertical section and plan of the Myth body (three sheets in all). Rm/EAG. 704 | ||
| scan0084 | From Rm/EAG to Ev accompanying a blueprint of the Myth with additions. | ||
| View original record | 1030 To Ev. from Rm/EAG. Rm/EAG.10/ET.18.11.40. I send you herewith a blue print of the Myth showing additions of screen, back light, etc.. This will help to keep you up to date with what we are… | ||
| scan0085 | Letter to Wilmot-Breeden Ltd. regarding the design of a slam lock with a spring-loaded dovetail. | ||
| View original record | 1030 704 Rm/EAG.3/ET. 21st November 1940. Messrs. Wilmot-Breeden Ltd., EASTERN WORKS - Camden Street, B I R M I N G H A M. Attention Mr. Spicer. Dear Mr. Spicer, Regarding the lock for the car we are… | ||
| scan0086 | Confirming the dispatch of a blueprint as arranged. | ||
| View original record | To Ev/JD. from Rm/EAG. Myth 1030 Rm/EAG.2/ET.21.11.40. as arranged. Herewith blue print of Rb.13003, Sheet No.2, Rm/EAG. 704 | ||
| scan0087 | Letter to Messrs. Wilmot-Breeden Ltd. regarding a blueprint for Myth body moulding. | ||
| View original record | 1030 Rm/EAG.5/ET. 25th November, 1940. 704 Messrs. WILMOT-BREEDEN Ltd., Eastern Works - Camden Street, B I R M I N G H A M. Attention of Mr. Spicer. Dear Mr. Spicer, We are sending you herewith blue… | ||
| scan0088 | Clearance of an invoice for sliding roof fittings supplied by Weathershields Ltd. | ||
| View original record | 1030 704 To G/WFH. from Rm/EAG. Rm/EAG.3/ET.25.11.40. Replying to your memo G/WFH/CA.26/JE.21.11.40, with reference to sliding roof fittings from Messrs. Weathershields Ltd., Moor Street, Birmingham,… | ||
| scan0089 | Letter to Wilmot-Breeden Ltd. sending a print (RB.12003) showing a section of the rear door of the Myth. | ||
| View original record | 1080 704 Rm/EAG.7/ST. 27th November, 1940. Messrs. Wilmot-Breeden Ltd., Eastern Works - Camden Street, B I R M I N G H A M. Attention of Mr. Spicer. Dear Mr. Spicer, As arranged, we are sending you a… | ||
| scan0090 | Letter to Messrs. Twining Ltd regarding a blueprint showing the inside line of the doors. | ||
| View original record | 1030 28th November, 1940. Rm/EAG.1/ET. 704 Messrs. Twining Ltd, Pike Lane, N O R T H A M P T O N. Attention Mr. Clifton. Dear Sirs, We are sending you herewith blue print showing the inside line of… | ||
| scan0091 | Design, components, and layout of the 'Myth' dashboard. | ||
| View original record | To Messrs. Farm. L/Illo. C. to Mr. Ra/Hl. Ra/BAG. MYTH DASHBOARD. -------------------------- Please receive herewith the original of FL.421, Arrangement of Dashboard, Engine side and Plan - 2 sheets.… | ||
| scan0092 | Letter to the Pressed Steel Company seeking advice on body design, specifically regarding joints and door openings. | ||
| View original record | Rn/EAG.5/ET. 3rd December, 1940. PRESSED STEEL COMPANY, Cowley, O X F O R D. Attention of Mr. Maton. Dear Mr. Maton, Can you send someone to see us early next week, with reference to the body which we… | ||
| scan0093 | Letter to Wilmot-Breeden Ltd. regarding the suitability of a double-action lock for the 'Myth' body. | ||
| View original record | 1030 Rm/EAG.2/ET. 5th December, 1940. 704 Messrs. Wilmot-Breeden Ltd., Eastern Works - Camden Street, B I R M I N G H A M. Attention of Mr. Spicer. Dear Mr. Spicer, Regarding the rear boot lid and… | ||
| scan0094 | Letter to Twining Models regarding design modifications and queries for the 'Myth Model'. | ||
| View original record | 1080 6th December, 1940. 704 Rm/RG.A/ST. Messrs. Twining Models, Pike Lane, NORTHAMPTON. For the attention of Mr. E.H. Clifton. Dear Sir, Re: Myth Model. We thank you for your letter of the 5th… | ||
| scan0095 | Letter regarding a blueprint for head and pass lamps for the Myth model. | ||
| View original record | 1080 6th December, 1940. 704 Rm/EAG.6/ST. Messrs. Twining Models., Pike Lane, NORTHAMPTON. For the attention of Mr. B.H. CLIFTON. Dear Sir, We are sending you herewith blue print PL.404, showing head… | ||
| scan0096 | Chromium plating of a zinc sheet to produce a 1/4 scale model of the Myth radiator grill. | ||
| View original record | Secret. To Rm. from Ev. Ev.2/JH.11.12.40. re Plastacine Model of Myth. As agreed we enclose herewith a sheet of zinc, which it was suggested the Works should chromium plate and return to us. If we can… | ||
| scan0097 | Letter to Twining Models outlining specifications for a model, including details on badges, steering wheel finish, and headlamps. | ||
| View original record | 1080 Rm/EAG.5/ET. 11th December, 1940. 704 Messrs. Twining Models, Pike Lane, NORTHAMPTON. Attention of Mr. Clifton. Dear Sir, As arranged during our visit to your Works yesterday, we are sending you… | ||
| scan0098 | Secret internal memo regarding the model maker's drawing for the 'Myth' rear bumpers. | ||
| View original record | 1030 704 S E C R E T. To Rm. from Ev/JD. C. to Ev. Rm/HH. Rm/EAG. Ev/JD.4/F.11.12.40. REAR BUMPERS - MYTH We send attached to Rm/HH.'s copy the original of PL.432, Rear Bumper - Myth, (Model Maker's… | ||
| scan0099 | Letter to 'Triplex' Safety Glass Co. regarding a sample back light and its potential for two-directional bending for a sample body. | ||
| View original record | 1030 704 12th December, 1940. Rm/EAG.1/ET. Jack Follett, Esq., "Triplex" Safety Glass Co., Ltd., 1, Albermarle Street, Piccadilly, LONDON W. 1. Dear Mr. Follett., I have been a long time replying to… | ||
| scan0100 | Letter to E.H. Clifton of Messrs. Twining Models confirming the dispatch of parts for head and pass-lamps. | ||
| View original record | 1030 16th December, 1940. Rm/EAG.5/ET. 704 E.H. Clifton, Esq., Messrs. Twining Models, Pike Lane, N O R T H A M P T O N. Dear Mr. Clifton, We have today dispatched to you per passenger train one piece… | ||
| scan0101 | Urgent request to dispatch two pieces of brass bar to Twining Models in Northampton. | ||
| View original record | To Mt. from Rm/EAG. 1030 (handwritten) Rm/EAG.2/ET.16.12.40. Will you please dispatch, by passenger train, two pieces of brass bar herewith, to TWINING MODELS, Pike Lane, Northampton. For the… | ||
| scan0102 | Confirming materials for Twining Models are not chargeable and requesting dispatch procedures. | ||
| View original record | To D/BP/FWR. from Rm/EAC Rm/EAC.7/ET.18.12.40. Replying to your memo D/BP/FWR.1/IC.17.12.40, please note that the material sent to Twining Models is not chargeable, as it is to be used on work they… | ||
| scan0103 | Quality and appearance of sun visor fittings from Wilmot Breeden. | ||
| View original record | To Rm. from Rm/EAG. [Handwritten: Myth 704] Rm/EAG.2/ET.19.12.40. [Handwritten: 1030] SUN VISOR FITTINGS. 9-B-V has Wilmot Breeden's latest type of sun visor fittings on the driving side. The board… | ||
| scan0104 | Letter to Twining Models regarding blueprints for a bumper and lamp bracket. | ||
| View original record | 1030 19th December, 1940. Rm/EAC.9/ET. 704 Messrs. Twining Models, Pike Lane, NORTHAMPTON. Attention of Mr. Clifton. Dear Mr. Clifton, Please find herewith blue print of sketch No. PL.435. This shows… | ||
| scan0105 | Letter to coachbuilder Park Ward & Co., Ltd. regarding the supply of prints for the 'Myth Body' project. | ||
| View original record | 1030 Rm/RG.3/ET. 19th December, 1940. 704 Messrs. Park Ward & Co., Ltd., 473, High Road, Willesden, LONDON N.W. 10. For the attention of Mr. C.W. Ward. Dear Sirs, Re: MYTH BODY. We herewith confirm… | ||
| scan0106 | Responding to concerns about sun visor fittings, suggesting they will be satisfactory if made thicker and covered more carefully. | ||
| View original record | Rm/EAG. From Rm. [Handwritten: Vygt] Rm.10/ML.20.12.40. [Handwritten: 704 1030] SUN VISOR FITTINGS. With reference to your Memo. Rm/EAG.2/ET.19.12.40. I see no reason why these sun visors should not… | ||
| scan0107 | Personal letter chasing an outstanding order for eight pieces of frame steel, suggesting a way to bypass permit issues. | ||
| View original record | PERSONAL. Rm.2/ML. 20.12.40. R.Summers,Esq., SHOTTON. Chester. Dear Dick, Thank you for your letter of the 16th. December. I am going North and see whether we can fit in an inspection of this mill.… | ||
| scan0108 | Letter to Wilmot-Breeden Ltd. discussing locks, a petrol filler lid, and a method for bending stainless steel glass channelling. | ||
| View original record | Rm/EAG.5/ET. 23rd December 1940. Messrs. Wilmot-Breeden Ltd., Eastern Works, Camden Street, BIRMINGHAM. Attention of Mr. Spicer. Dear Mr. Spicer, LOCKS. Thank you for the drawings of the locks… | ||
| scan0109 | Letter to Messrs. Twining Models regarding a corrected drawing and a request for model inspection. | ||
| View original record | 704 1080 27.12.40. Rm/EAG.1/EH. Messrs. Twining Models, Pike Lane, N O R T H A M P T O N. Attention of Mr. Clifton. Dear Sir, We are sending you herewith print of corrected drawing of Myth front end… | ||
| scan0110 | Letter to W.A. Robotham regarding the arrangement of eight strips without a license, by classifying them as samples. | ||
| View original record | Telephone:- 200 Connah's Quay Telegrams:- Summers, Chester. [Handwritten:] 261a 1030 [Handwritten:] 704 [Handwritten in red ink:] Hugh Shotton, Chester. 31st December, 1940. Dear Bill, Thank you for… | ||
| scan0111 | Letter to Twining Models regarding the 'Myth' model, discussing the instrument board print, completion deadline, and chromium plating. | ||
| View original record | 1030 Rm/EAG.12/ET. E.H. CLIFTON Esq., Twining Models, Pike Lane, NORTHAMPTON. 31st December, 1940. 704 Dear Sir, We send you herewith print of facier and instru- ment board for the Myth. You will see… | ||
| scan0112 | Secret letter to Park Ward & Co. providing a blueprint and material specifications for the Myth Chassis frame. | ||
| View original record | To Rm. from Ev/JD. c. Ev. c. Rm/EAG. 1030 704 SECRET. Ev/JD.5/SW. 2nd January, 1941. Messrs. Park Ward & Co., Ltd., 473, High Road, Willesden, LONDON, N.W.10. For the Attention of Mr. C. Ward. Dear… | ||
| scan0113 | Letter from a steel supplier regarding an inability to meet the specified carbon content for an order. | ||
| View original record | TELEGRAMS: SUMMERS, CHESTER. TELEPHONE: 200 CONNAH'S QUAY (10 LINES). CODES USED: BENTLEY'S: BENTLEY'S 2ND PHRASE. A.B.C. 6TH (5 LETTER) EDITION. MARCONI INTERNATIONAL. WESTERN UNION. BIRCHWOOD'S.… | ||
| scan0114 | Letter to R. Summers, Esq., thanking him for a letter and discussing steel strips and post-war products. | ||
| View original record | 1030 2bTa 704 Nuglh Ru.3/ML. 3.1.41. R.Summers, Esq., SHOTTON. Chester. Dear Dick, Thank you so much for your letter of the 31st. December. It is very good of you to fix these steel strips. It is a… | ||
| scan0115 | Letter to Messrs John Summers & Sons Ltd., agreeing to an order for carbon sheet steel and requesting expedited delivery. | ||
| View original record | Yr. ref: S/LCS/W Rm.9/ML. Messrs John Summers & Sons Ltd., Hawarden Bridge Steel Works, SHOTTON. Chester. Dear Sirs, With reference to your letter of the 2nd. January. Please note that we are… | ||
| scan0116 | Proposed method for dashboard mounting and its final design. | ||
| View original record | To Rm. from Ev/JD. c. to Ev. c. to Rm/HH. c. to Rm/EAG. Ev/JD.9/SW.10.1.41. MYTH. DASHBOARD MOUNTING. We attach to Rm/HH's copy the original of PL.442 Dashboard Mounting. The above scheme shows the… | ||
| scan0117 | List of seven bodywork revisions for the 'MYTH' full-size model. | ||
| View original record | 10S0 70H 13.1.41. REVISIONS TO MYTH FULL SIZE. --------------------------- 1. Spare wheel depression in rear compartment to be moved towards R.H. side to accommodate Petrol Filler pipe. 2. Propellor… | ||
| scan0118 | Letter to Mining & Chemical Production Ltd requesting a sample of Cerabend metal for casting experiments. | ||
| View original record | [ c. go Rm. ] file Myth 1080 704 Ev.5/JH. 17th. January, 1941. Messrs. Mining & Chemical Production Ltd., Station Wharf Works, Alperton, Middx. Dear Sirs, We wish to make a small and delicate model… | ||
| scan0119 | Letter to Park Ward Ltd regarding modifications for the 'Myth' body, floor, and tonneau. | ||
| View original record | 1030 704 20th January, 1941. Rm/EAG.2/ET. C.W. Ward, Esq., Messrs Park Ward Ltd, 473, High Road, Willesden, LONDON N.W. 10. Dear Mr. Ward, MYTH BODY. Regarding the information you are wanting for the… | ||
| scan0120 | Properties of fusible metals, including Cerebend, for the creation of a mascot for the Myth Model. | ||
| View original record | 704 To Rm/EAG. from Ev. c. to Rm/ Ev.1/JH.23.1.41. re Mascot for Myth Model. 1020 We have ordered a pound of the low fusion metal of which you told us called "Cerebend". Apparently it is a type of… | ||
| scan0121 | Making casts with solder and Cerebend, noting the material's expansion properties. | ||
| View original record | -2- Ev.1/JH.23.1.41. which are already embedded in Plaster of Paris. We shall make some casts in both solder and Cerebend. The property of expansion on solidification of the latter will require… | ||
| scan0122 | Cover letter to C.W. Ward of Park Ward Ltd. enclosing promised prints for the 'Myth Body'. | ||
| View original record | 1030 704 23rd January, 1941. Rm/EAG.7/ET. C.W. WARD, Esq., Messrs. Park Ward Ltd., 473 High Road - Willesden, L O N D O N N.W. 10. Dear Mr. Ward, MYTH BODY. Please find herewith Print Rm.10008, sheets… | ||
| scan0123 | Letter to Messrs. Park Ward Ltd. requesting paint, leather, and Rexine for a model car. | ||
| View original record | 1030 704 23rd January, 1941. Rm/EAG.2/ET. C.W. WARD, Esq., Messrs. Park Ward Ltd., 473 High Road, Willesden, L O N D O N N.W. 10. Dear Mr. Ward, Confirming our telephone conversation this morning,… | ||
| scan0124 | Letter from Park Ward & Co Ltd regarding the high cost and production delays of a 'Myth Body'. | ||
| View original record | DIRECTORS: A. F. SIDGREAVES H. W. HARVEY-BAILEY F. C. HONEYMAN C. W. WARD C. FALCONER W. S. PAGE TELEPHONE: WILLESDEN 2595 (6 LINES) TELEGRAMS: WARENPAR-WILLROAD-LONDON YOUR REF. ........... OUR REF.… | ||
| scan0125 | Letter to Park Ward & Co. Ltd. providing schemes to assist in the production of a 'Myth Frame' and listing associated part numbers. | ||
| View original record | To Rm. from Ev/JD. c. to Bv. [struck through] c. to Rm/EAG. 704 1030 SECRET. Ev/JD.1/SW. 24th January, 1941. Messrs. Park Ward & Co., Ltd., 473, High Road, Willesden, LONDON. N.W.10. For the attention… | ||
| scan0126 | Secret internal memo requesting photographic reproductions of a watercolour drawing of a car. | ||
| View original record | SECRET. [Handwritten]: 704 1030 To NW. from Ev. c. to Rm. [Handwritten signature]: mytt Ev.9/JH.28.1.41. re Photographic Reproduction. We would be glad if you would copy the attached water colour… | ||
| scan0127 | Letter to C.W. Ward of Park Ward's Ltd regarding an upcoming meeting in Derby and the expense of the 'Myth' body. | ||
| View original record | Rm.6/ML. 30.1.41. 1080 704 C.W.Ward,Esq., Messrs Park Ward's Ltd., 473, High Road, WILLESDEN. N.W.10. Dear Ward, Thanks for yours of January 24th. We anticipate having our meeting at Derby sometime… | ||
| scan0128 | Letter to R. Summers regarding a forgotten book, a list of steel parts for a 'poor man's motor car', and a request for information on Bowzer filters. | ||
| View original record | Rm.114/ML. 1030 704 30.1.41. R.Summers,Esq., SHOTTON. Chester. Dear Dick, After all the trouble your secretary took, I omitted to pack the book of which you are author. Could you possibly post one to… | ||
| scan0129 | List detailing the quantity and dimensions of steel sheets required for project 'MYTH'. | ||
| View original record | STEEL REQUIRED FOR MYTH. (Deep Drawing Auto-Body Sheet.) 4 Sheets 72 x 48 x .048 (Heelplate Hinge reinf: Trunk reinf: etc.,) 4 " 72 x 48 x .040 (Underframe, Crossmember, Monopiece, Door opening… | ||
| scan0130 | Letter to Park Ward Ltd. concerning a blueprint for a Myth front door layout and further particulars. | ||
| View original record | 704 1030 Rm/EAG.1/ET. 31st January, 1941 Messrs. Park Ward Ltd., 473, High Road, Willesden, LONDON N.W. 10. Dear Sirs, Herewith blue print of Myth front door layout RB.12004. Particulars of… | ||
| scan0131 | Letter to Messrs. Park Ward Ltd. regarding the supply of materials such as paint, cloth, Rexine and carpet for the Myth model. | ||
| View original record | 704 1030 31st January, 1941. Rm/HAG.2/LT. C.W. WARD, Esq., Messrs. PARK WARD Ltd., 473 High Road - Willesden, LONDON N.W. 10. Dear Mr. Ward, Thank you for your letter of the 28th instant, with… | ||
| scan0132 | Letter requesting grey-green leather from Connolly Bros. Ltd. for upholstering a quarter-scale model car body. | ||
| View original record | 1030 704 31st January, 1941. RM/MAC.6/ST. Messrs. CONNOLLY Bros. Ltd., Chalton Street, Euston Road, L O N D O N. Dear Sirs, Confirming our telephone conversation this afternoon, we require sufficient… | ||
| scan0133 | Design of the 'Myth' body hard wear and accessories and cooperation with Wilmott Breedons. | ||
| View original record | To Sg. from Rm. MYTH BODY HARD WEAR AND ACCESSORIES. 704 We are well on with the design of the Myth body and have now reached the point where we are ready to discuss door-locks, window lifters,… | ||
| scan0134 | Letter to supplier Wilmot Breedons Ltd. concerning a list of fittings for the 'Myth' body. | ||
| View original record | H.J. Spicer Esq., Messrs. Wilmot Breedons Ltd., Eastern Works, Camden Street, BIRMINGHAM.1. Dear Mr. Spicer, I am enclosing a list of the fittings which will be used on the Myth in which you are… | ||
| scan0135 | Letter from John Summers & Sons, Limited, responding to an enquiry about Deep Drawing Auto-body Sheets. | ||
| View original record | TELEGRAMS: SUMMERS, CHESTER. TELEPHONES: 200 CONNAH'S QUAY (10 LINES). CODES USED: BENTLEY'S; BENTLEY'S 2ND PHRASE, A.B.C. 6TH (5 LETTER) EDITION. MARCONI INTERNATIONAL. WESTERN UNION. BIRCHWOODS.… | ||
| scan0136 | Comparison of specified steel sheet sizes versus the nearest sizes offered by supplier John Summers & Sons Ltd. | ||
| View original record | ATTACHMENT FOR LETTER TO W. A. ROBOTHAM, ESQ., ROLLS-ROYCE LTD., DERBY. John Summers & Sons Ltd., 6. 2. 41 STEEL REQUIRED FOR MYTH (Deep Drawing Auto-Body Sheet.) Size Specified by Rolls-Royce Ltd.… | ||
| scan0137 | Telephone message from Summers Connahs Quay for Mr. Robotham regarding strips ready for collection. | ||
| View original record | Taken over the telephone 2.30 p.m. 10.2.41. ET. 1021 From SUMMERS Connahs quay. ATTENTION MR. ROBOTHAM STRIPS READY FOR COLLECTION. SUMMERS. [Handwritten Signature] 704 | ||
| scan0138 | The current position on cars, including upcoming watercolour sketches for the 'Myth' model and arranging a meeting at Clan Foundry. | ||
| View original record | Copies wanted for Sg. + Hs. files 1021 To Sg. & Hs. from Rm. Copy to Ev. Rm/EAG. Rm.3/ST.10.2.41. C A R S. Herewith a summary of the present position on cars. PL.443 will follow, also water colour… | ||
| scan0139 | Letter to steel supplier John Summers & Sons, Ltd. regarding the collection of materials for front side members and an experimental body. | ||
| View original record | 1021 Rm.9/ET. 10th February, 1941. Messrs. John SUMMERS & Sons, Ltd., Hawarden Bridge Steel Works, Shotton. Chester. For the attention of the Sales Manager. Dear Sirs, We have your telegram saying… | ||
| scan0140 | Letter from John Summers & Sons regarding a delay with a consignment of steel sheets. | ||
| View original record | TELEGRAMS: SUMMERS, CHESTER. TELEPHONE: 200 CONNAH'S QUAY (10 LINES). CODES USED: BENTLEY'S; BENTLEY'S 2ND PHRASE. A.B.C. 6TH (5 LETTER) EDITION. MARCONI INTERNATIONAL. WESTERN UNION. BIRCHWOOD'S.… | ||
| scan0141 | Letter from John Summers & Sons, Ltd. to Mr. Robotham acknowledging receipt of his letter and enclosing a book. | ||
| View original record | TELEGRAMS: SUMMERS, CHESTER. TELEPHONE: 200 CONNAH'S QUAY (10 LINES). CODES USED: BENTLEY'S; BENTLEY'S 2ND PHRASE, A.B.C. 6TH (5 LETTER) EDITION, MARCONI INTERNATIONAL. WESTERN UNION, BIRCHWOOD'S,… | ||
| scan0142 | Comparison of specified steel sheet sizes versus those offered by supplier J.S.&S for the 'MYTH' project. | ||
| View original record | 1021 STEEL REQUIRED FOR MYTH (Deep Drawing Auto-Body Sheet.) 10.2.41. Size Specified by Rolls-Royce Ltd. Nearest Size Offered by J. S. & S. 1 72" x 48" x .048" 71" x 24" x .048" Quantity x 2 2 72" x… | ||
| scan0143 | Letter to C.W. Ward arranging a meeting to discuss the Myth car model and chassis work. | ||
| View original record | 1030 704 Rm.6/ET. 10th February, 1941. C.W. WARD, Esq., Messrs PARK WARD Ltd., 473, High Road, Willesden, L O N D O N N.W.10 Dear Ward, Sg. has arranged a meeting for 11.30 a.m. on Monday next, 17th… | ||
| scan0144 | The arrangement drawing of the 'Myth' chassis and a list of sections to be corrected. | ||
| View original record | To Rm. from Ev/JD. c. to Ev. c. to Rm/HH. c. to Rm/EAG. 704 Ev/JD.6/SW.11.2.41. MYTH. CHASSIS. We attach to Rm/HH's copy the original of :- PL.443 Arrangement of Myth Chassis. The above drawing has… | ||
| scan0145 | Letter to Messrs. Park Ward Ltd. enclosing blueprints for a dash for 'Myth', number RB.13006. | ||
| View original record | Handwritten: 704 & 1021 + 704 HORT 1580 Rm/EAG.4/RH. 13th February, 1941. Messrs. Park Ward Ltd., 473, High Road, Willesden, LONDON. N.W.10. Dear Sirs, We are sending you herewith our blue prints of… | ||
| scan0146 | Delivery and advice note for a shipment of black summit steel sheets from John Summers & Sons, Ltd. | ||
| View original record | M640/6/40. JOHN SUMMERS & SONS, LTD., SHOTTON, CHESTER. Tel. Connah's Quay 200. 904 1080 Delivery & Advice Note. No 4906 Works Ref. 147/K/7 M'fst No. M 1956 Febry 13th. 1941 Haulier OWN LORRY To… | ||
| scan0147 | Delivery and advice note from John Summers & Sons for Black Summit Steel Sheets. | ||
| View original record | M610/6/40. JOHN SUMMERS & SONS, LTD., SHOTTON, CHESTER. Tel. Connah's Quay 200. Delivery & Advice Note. No 4906 Works Ref. 147/K/7 M'fst No. M 1956 Febry 13th. 1941 Haulier OWN LORRY To... Messrs.… | ||
| scan0148 | Delivery and advice note for black summit steel sheets from John Summers & Sons, Ltd. | ||
| View original record | M610/6/40. JOHN SUMMERS & SONS, LTD., SHOTTON, CHESTER. Tel. Connah's Quay 200. Delivery & Advice Note. № 4906 Works Ref. 1/7/k/7 M'fst No. M 1956 Febry 13th. 1941. Haulier OWN LORRY To. Messrs. Rolls… | ||
| scan0149 | Delivery and advice note for Mild Steel Strip from John Summers & Sons, Ltd. | ||
| View original record | M640/6/40. JOHN SUMMERS & SONS, LTD., SHOTTON, CHESTER. Tel. Connah's Quay 200. NC. Delivery & Advice Note. No 4904 Works Ref. 147/BX/6. M'f'st No. NEW.MILL.WEST. 14th Feb.1941. Haulier OWN LORRY To… | ||
| scan0150 | Delivery and advice note from John Summers & Sons Ltd for mild steel strip. | ||
| View original record | M640/6/40. JOHN SUMMERS & SONS, LTD., SHOTTON, CHESTER. Tel. Connah's Quay 200. NG. Delivery & Advice Note. No 4904 Works Ref 147./BX/6. M'f'st No. NEW.MILL.WEST. 14th.Feb.1941. Haulier OWN LORRY… | ||
| scan0151 | Delivery and advice note for mild steel strip from John Summers & Sons, Ltd. | ||
| View original record | M640/6/40. JOHN SUMMERS & SONS, LTD., SHOTTON, CHESTER. Tel. Connah's Quay 200. NO. Delivery & Advice Note. No 4904 Works Ref.147/RK/6. M'fst No.NEW.MILL.WEST. 14th Feb 1941 Haulier OWN LORRY To… | ||
| scan0152 | Letter from Park Ward & Co. Ltd. rescheduling a meeting due to a conflicting Admiralty appointment regarding Convoy Kites. | ||
| View original record | DIRECTORS: A. F. SIDGREAVES C. W. WARD R. W. HARVEY-BAILEY C. FALCONER F. C. HONEYMAN W. S. PAGE PARK WARD & CO. LTD SHEET METAL AND WOOD WORK 473, HIGH ROAD, WILLESDEN LONDON, N. W. 10 TELEPHONE:… | ||
| scan0153 | Letter to Weathershields Ltd. regarding a preliminary layout for a sliding roof for the 'Myth' sample body. | ||
| View original record | 1030 704 14th February, 1941. Rm/RG.1/RM. Messrs. Weathershields Ltd., 48, Moor Street, BIRMINGHAM. For the Attention of Mr. Clements. Dear Sirs, Sliding Roof for Myth. We enclose herewith our drawing… | ||
| scan0154 | Proposing to increase the front seat width on the 'Myth' model by creating a recess in the door opposite the gear change. | ||
| View original record | To Rm/EAG. from Rm. 704 1030 Rm.3/ET.14.2.41. With the side gear change and hand brake lever at present schemed on the Myth, we can increase the width of the front seat if you can make a recess in the… | ||
| scan0155 | Confidential memo discussing speculation about post-war small car production and the challenges of maintaining secrecy. | ||
| View original record | Private & Confidential. 1030 704 To Sg. from Rm. Rm.4/ET.16.2.41. CONFIDENTIAL INFORMATION RE MYTH ----------------------------- We have received a letter from Ward, a copy of which we attach. We… | ||
| scan0156 | Letter from Park Ward & Co. warning of a potential information leak regarding a future 10 HP car. | ||
| View original record | COPY. PARK WARD & Co. Ltd. Sheet Metal and Wood Work. 473, High Road - Willesden LONDON N.W. 10 CWW/GC 7th February, 1941. W.A. ROBOTHAM Esq., Messrs. Rolls-Royce Ltd., D E R B Y. Dear Rm., It occurs… | ||
| scan0157 | Current coachwork position, production plans for the 'Myth' car, and post-war planning. | ||
| View original record | 7.04. 1030 To Sg. & Hs. from Rm. Rm.11/ET.16.2.41. Herewith a report by Rm/EAG. on the present coachwork position. I have so far assumed that, since Giles was left with Ward, Park Wards would be… | ||
| scan0158 | Letter to Messrs Park Ward Ltd. confirming a suitable green leather sample has been found for the model Myth body. | ||
| View original record | Rm/EAC.1/RH. 17th February, 1941. 1030 404 Messrs Park Ward Ltd., 473, High Road, Willesden, L O N D O N. N.W.10. Dear Sirs, We thank you for the sample of green leather which you kindly obtained for… | ||
| scan0159 | Radiator interchangeability for the 'Myth' model compared to the 'Ripple' model. | ||
| View original record | To Sg. from Rm. "MYTH" MODEL. ------------ In order to get production interchangeability between the two types of radiator on the "Myth" car, it may be necessary to alter the appearance of the… | ||
| scan0160 | Letter to Park, Ward & Co. requesting a hold on work for the 'Myth' dash due to issues with the windscreen wiper mechanism. | ||
| View original record | 704 1030 20th February, 1941. Rm/EAG.2/RH. Messrs. Park, Ward & Co., Ltd., 473, High Road, Willesden L O N D O N. N.W.10. Dear Sirs, Regarding the dash for Myth, blue prints of which we sent to you on… | ||
| scan0161 | Side elevation blueprint comparing the 'Myth' and 'Ripplet' body styles with dimensions. | ||
| View original record | MYTH COMPARED WITH RIPPLET. 1080 99.00 18.50 30.5 27.75 7.00 "SUNSHINE" ROOF 32.75 "NO-DRAUGHT" VENTILATION. 34.50 17" WHEEL 14.00 8.00 20.75 46.75 36.00 18.00 20.00 29.00 62.50 13.350 GROUND LEVEL -… | ||
| scan0162 | Completion and distribution of photographs for the Myth and Ripplet models. | ||
| View original record | TO Ev/J.D. (struck through) Ev/DB.) Rm/EAG.) from Ev. c. to Rm. SECRET. Ev,2/JH.24.2.41. Handwritten: 704 / 1030 re Photographs of Myth Models Etc. [Signature] You will by now have completed the… | ||
| scan0163 | Seeking clarification on the design and features of the Myth Instrument Board. | ||
| View original record | 704 SECRET. To Mr. Greene. c. to Rm. Ev.1/JH.5.3.41. re Myth Instrument Board. We have now set out completely a perspective view of the Myth Instrument Board as given to us on RB.13004. There are a… | ||
| scan0164 | Placement of switches, the wireless control unit, and heater controls. | ||
| View original record | -2- Ev.1/JH.5.3.41. and that some if not all of the push pull switches indicated might be housed in the panel of the instrument board made available by the reduction in size of the right hand cubby… | ||
| scan0165 | Responding to queries about the 'Myth' instrument board design. | ||
| View original record | To EV From Rm/EAG. Copy to Em. Rm/EAG.6/ET.6.3.41. MYTH INSTRUMENT BOARD. ------------------ Replying to your memo Ev.1/JH.5.3.41, drawing RB.13004 was made so that sufficient information could be… | ||
| scan0166 | Layout and accessibility of instrument panel switches and components for a vehicle named Myth. | ||
| View original record | Rm/EAG.6/ET.6.3.41 - 2 - We understood that the main switch would be similar to that fitted to Rover cars. We consider that if the large speedometer and main switch as used on B.V are fitted and the… | ||
| scan0167 | Confirming the issue of blueprint RB.18006 for a modified front seat layout for the Myth Project. | ||
| View original record | To EV/JD. from Rm/RG. Copy to Rm. Ev. 7404 1080 Rm/RG.3/ET.6.3.41. Re MYTH PROJECT. No.RB.18006 - Layout shewing suggested Front Seat with modified Change Speed and Brake Lever positions. This… | ||
| scan0168 | 'MYTH PROJECT', confirming the handover of a blueprint for a front seat layout. | ||
| View original record | 1030 704 To Ev/JD. from Rm/RG. Copy to Rm. Ev. Rm/RG.3/ST.6.3.41. Re MYTH PROJECT. We herewith confirm having handed to Ev/JD. blue print No.RB.18006 - Layout showing suggested Front Seat with… | ||
| scan0169 | Forwarding correspondence received from Motor Panels concerning tool storage for B.V bodies. | ||
| View original record | To Rm. from Rm/EAG. 1030 704 Rm/EAG.3/ET.10.3.41. Herewith copy of a letter received from Motor Panels, dealing with tool storage for B.V bodies, together with a copy of our reply. Rm. | ||
| scan0170 | Design and layout of the 'Myth' instrument board. | ||
| View original record | To Ev/ from Rm/EAG. Copy to Rm. 704 Rm/EAG.6/ET.6.3.41. 1030 MYTH INSTRUMENT BOARD. -------------------- Replying to your memo Ev.1/JH.5.3.41, drawing RB.13004 was made so that sufficient information… | ||
| scan0171 | Layout and wiring of instrument panel switches and components. | ||
| View original record | Rm/EAG.6/ET.6.3.41 - 2 - We understood that the main switch would be similar to that fitted to Rover cars. We consider that if the large speedometer and main switch as used on B.V are fitted and the… | ||
| scan0172 | Sheet metal sent to Park Ward, Ltd. for the construction of a Myth body. | ||
| View original record | To Rm. from Rm/Wym. Copy to Rm/EAG. Ev. Ev/JD. File Myth 704 1030 Rm/Wym.3/SW.11.3.41. We have today despatched per our own lorry to Messrs. Park Ward, Ltd., sheet metal as follows:- 14 Sheets 72 x 48… | ||
| scan0173 | Confirming decisions made regarding the 'Myth' model's instrument board and tool drawer contents. | ||
| View original record | To Rm. from Rm/RG. Copy to Ev. Rm/EAG. Ev/JD. 704 Rm/RG.6/GT.11.3.41. 1030 MYTH INSTRUMENT BOARD ETC. ----------------------- Confirming the discussion held at the Clan Experimental Dept. on Monday,… | ||
| scan0174 | Meeting notes on design decisions for a Bentley model, covering body trimming, wings, mouldings, and bumpers. | ||
| View original record | Rm/RG.6/ST.11.3.41. - 2 - h - The question of a rexine covered board was raised for the Bentley Myth, but no definite decision was reached. It will probably be necessary to have one or more samples… | ||
| scan0175 | Decisions on the instrument board, controls, and tool drawer for the Myth model. | ||
| View original record | To Rm. from Rm/RG. Copy to Ev. Rm/EAG. Ev/JD. 704 Rm/RG.6/ET.11.3.41. 1030 MYTH INSTRUMENT BOARD ETC. --------------------------- Confirming the discussion held at the Clan Experimental Dept. on… | ||
| scan0176 | Meeting notes discussing design decisions for bodywork and fittings on a Bentley model. | ||
| View original record | Rm/RG.6/ET.11.3.41. - 2 - h - The question of a rexine covered board was raised for the Bentley Myth, but no definite decision was reached. It will probably be necessary to have one or more samples… | ||
| scan0177 | Attaching prints for the Myth Dash panel assembly. | ||
| View original record | To Ev/JD. from Rm/RG. Copy to Mr. E.H. 704 Rm/RG.4/ET.14.3.41. 1030 MYTH DASH. ------------ Attached please find prints RB.13006 (4 Sheets) Dash Panel Assembly. With the exception of the Steering… | ||
| scan0178 | Prints for the Myth Dash panel assembly and the positioning of its various units. | ||
| View original record | 10301 704. To Ev/JD. from Rm/RG. Copy to Rm. & Ev. Rm/RG.A/LT.14.3.41. MYTH DASH. ------------ Attached please find prints EB.13006 (4 Sheets) Dash Panel Assembly. With the exception of the Steering… | ||
| scan0179 | Spare bulb holder for the Myth instrument board and the necessity of a tyre pressure gauge. | ||
| View original record | To Rn/RG. from Rn. Copy to Ev. Rn/HAG. Ev/JD. 704 1030 Rn.B/ET.15.3.41. MYTH INSTRUMENT BOARD ETC.. We have handed to Ev/JD. a spare bulb holder for the dashboard of the Myth. It will be fastened on… | ||
| scan0180 | Letter to Park Ward & Co., Ltd. listing the parts required to produce the 'Myth' chassis frame. | ||
| View original record | Copies sent to Rm. Ev, Rm, BAG & Rm HH. [Text crossed out] 404 [Handwritten] Ev/JD.11/SW. 16th March, 1941. Messrs. Park Ward & Co., Ltd., 473, High Road, Willesden, LONDON. N.W.10. For the attention… | ||
| scan0181 | List of chassis design drawings and materials sent for production. | ||
| View original record | -cont'd- - 2 - EV/JD.11/SW.16.3.41. We will send this information along as soon as available. It will be noticed that the left hand centre frame stiffener is not incorporated, as we have yet to fix… | ||
| scan0182 | Letter to C.W. Ward of Park Ward Ltd. regarding the material and construction of two chassis frames. | ||
| View original record | 1080 404 17th March, 1941. Rm/EAG.9/ST. C.W. WARD, Esq., Messrs. Park Ward, Ltd., 473 High Road - Willesden, LONDON N.W. 10. Dear Mr. Ward, Replying to your letter of March 14th, with reference to… | ||
| scan0183 | Letter chasing a lost consignment of stainless steel channeling for an experimental car. | ||
| View original record | 1030 404 Rm/EAG.1/ET. 17th March, 1941. Messrs. Wilmot Breeden, Ltd., Eastern Works - Camden Street, B I R M I N G H A M. Attention of Mr. Spicer. Dear Mr. Spicer, We should be glad to know if the… | ||
| scan0184 | Letter to Messrs. Park Ward, Ltd. regarding the dispatch of blueprints for a Frame Mono-piece Side and a Rear Compartment Floor Side Panel. | ||
| View original record | 1080 404 Rm/EAG.10/ET. 17th March, 1941. Messrs. Park Ward, Ltd., 473, High Road, Willesden, L O N D O N N.W. 10. Dear Sirs, We are sending you separately blue prints of Frame Mono-piece Side:… | ||
| scan0185 | Specification outline for the 'First Myth Car' following a meeting at the Clan Foundry. | ||
| View original record | Ev. from Rm. c. Rm/EAG. Jnr. c. Ev/JD. Rm/HH. c. Rm/Wym. Rm/CTS. 704 1030 Rm.2/ML.20.3.41. FIRST MYTH CAR. Whilst the R.A.F. are making up their minds as to the final specification of the winch which… | ||
| scan0186 | Letter to Park Ward, Ltd. regarding blueprints for detachable rear wings on the Myth body. | ||
| View original record | 1030 404- 21st March, 1941. Rm/RAG.7/ET. Messrs. Park Ward, Ltd., 473, High Road, Willesden, LONDON N.W. 10. Dear Sirs, It has now been decided that detachable rear wings will be fitted to the Myth… | ||
| scan0187 | Letter to Wilmot Breeden Ltd. regarding a blueprint for the Myth front door, detailing the window regulator and glass channeling. | ||
| View original record | Rm/EAG.S/BT. 21st March, 1941. Messrs. Wilmot Breeden Ltd., Eastern Works - Camden Street, B I R M I N G H A M. Attention of Mr. Spicer. Dear Mr. Spicer, We are sending you herewith a blue print of… | ||
| scan0188 | Letter to I.C.I. (Rexine) Ltd. requesting a specific leather cloth for trimming a sample car. | ||
| View original record | 1080 704 29th March, 1941. Rm/EAG.4/ET. Messrs. I.C.I. (Rexine) Ltd., Cheshire. Attention of Mr. Dalby. Dear Mr. Dalby, I was pleased to hear your voice on the telephone yesterday and to know that you… | ||
| scan0189 | The second page of a typed letter, concluding with a hopeful note. | ||
| View original record | Rm/EAG.4/ET.29.3.41 - 2 - I am sorry to give you this trouble, but hope that, when better times come, it will be to our mutual advantage. Yours sincerely, | ||
| scan0190 | Letter to Lucas Ltd. requesting a blueprint for a trafficator and clarification on the correct type of windscreen wiper knobs. | ||
| View original record | 704 Em/EAG.5/ST. 5th April, 1941. Messrs. Lucas Ltd., Great King Street, BIRMINGHAM. Attention of Mr. Bolton. Dear Sirs, This confirms our telephone conversation with your Department this morning.… | ||
| scan0191 | Letter to Park Ward & Co. regarding schemes for the Myth Chassis, including front suspension and frame gussets. | ||
| View original record | Copies sent to Rm. & Rm/HWH. 704 1080 EV/JD.2/SW. 7th April, 1941. Park Ward & Co., Ltd., 473, High Road, Willesden, LONDON N.W.10. For the attention of Mr.C.Ward. Dear Sirs, re:- Myth Chassis. As… | ||
| scan0192 | Delay in obtaining photographs of the 'Myth' radiator and Instrument Board models. | ||
| View original record | To Rm. from Ev/JD. c. to Ev. c. to Rm/EAC. 704 Ev/JD.5/SW.10.4.41. MYTH. PHOTOGRAPHS. After much delay due to shortage of plates, we have managed to obtain some photographs of the Myth radiator and… | ||
| scan0193 | Photograph of a dashboard panel casting. | ||
| View original record | ", | ||
| scan0194 | Photograph of a cast metal component, possibly part of an engine or chassis. | ||
| View original record | ", | ||
| scan0195 | Photograph of a cast metal component. | ||
| View original record | ", | ||
| scan0197 | Photograph of a prototype radiator grille, complete with Spirit of Ecstasy mascot and RR badge. | ||
| View original record | H.O.D./8 2.36 | ||
| scan0198 | Photograph of a car radiator grille featuring the Spirit of Ecstasy mascot. | ||
| View original record | RR 186 | ||
| scan0199 | Studio photograph of a car's radiator grille, mascot, and badge. | ||
| View original record | ", | ||
| scan0200 | Photograph of a radiator grille mounted for display. | ||
| View original record | RR | ||
| scan0201 | Photograph of a styling model for a car radiator grille and front end, complete with mascot and badge. | ||
| View original record | RR | ||
| scan0202 | Photograph of a car radiator grille and shell prototype or mock-up. | ||
| View original record | ", | ||
| scan0203 | Photograph of a radiator grille and hood design mockup, featuring the Spirit of Ecstasy mascot. | ||
| View original record | RR | ||
| scan0204 | Photograph of a styling model for a radiator grille and front-end design. | ||
| View original record | ", | ||
| scan0205 | Revisions to the dashboard layout, including component repositioning. | ||
| View original record | 704 To Rm. from Ev/JD. c. to [redacted] c. to Rm/[redacted] c. to Rm/Mac. Ev/JD.8/SW.17.4.41. MYTH. Dashboard. We attach to Rm/HH's copy the original of PL.547 - Revised Arrangement of Dashboard -… | ||
| scan0206 | Specification sheet for the 10HP Myth (1st Car). | ||
| View original record | MYTH (1st CAR) PL532 ENGINE 4CYL. 2.500 BORE 3.83" STROKE CAPACITY 1267 CC 10HP. R.A.C. 7 TO 1 COMP RATIO. OVERHEAD INLET C.I. MONO-BLOCK WITH SIDE EXHAUST VANDEVELL SMALL & BIG END CRANK JOURNAL… | ||
| scan0207 | Specification sheet detailing engine components, their design numbers, and related remarks. | ||
| View original record | SPECIFICATION SPECIFICATION No PL. 532 ISSUE No 1 SHEET No 2 TABLE DATA: Column Headers: SEC. No, TITLE, DESCRIPTION, DESIGN No, L.O.P., REMARKS. Row 1: SEC. No: 5000 TITLE: CRANKCASE & BEARINGS… | ||
| scan0208 | Specification sheet detailing various engine components and their design numbers. | ||
| View original record | SPECIFICATION SPECIFICATION No PL.532 ISSUE No 1. SHEET No 3. SEC. No: 5060 TITLE: VALVES & FITTINGS. DESCRIPTION: 1.35 INLET VALVE WITH OIL GUARD WASHER. 30° SEAT & VENTURI. 1.125 Ex. VALVE SOLID, NO… | ||
| scan0209 | Specification sheet detailing various automotive components, their design numbers, and remarks. | ||
| View original record | SPECIFICATION SPECIFICATION No PL.532 ISSUE No 1 SHEET No 4 SEC. No | TITLE. | DESCRIPTION. | DESIGN No | DETAILS | L.O.P. | REMARKS. 5200 | OIL & PETROL FITTINGS. | TYPE I.M. BY-PASS OIL FILTER.… | ||
| scan0210 | Specification sheet detailing various vehicle components, modifications, and requirements. | ||
| View original record | SPECIFICATION SPECIFICATION No PL.532 ISSUE No 1 SHEET No 5 SEC. No | TITLE. | DESCRIPTION. | DESIGN No | DETAILS | L.O.P. | REMARKS. --- | --- | --- | --- | --- | --- | --- 5270 | STARTING HANDLE | |… | ||
| scan0211 | Specification sheet for vehicle chassis components including propeller shaft, axle, brakes, and frame fittings. | ||
| View original record | SPECIFICATION SPECIFICATION No PL532 ISSUE No 1 SHEET No 6 SEC No | TITLE. | DESCRIPTION. | DESIGN No | DETAILS | L.O.P. | REMARKS. --- | --- | --- | --- | --- | --- | --- 6110 | PROPELLOR SHAFT |… | ||
| scan0212 | Specification sheet (No. 7) detailing components including springs, axles, brakes, and steering. | ||
| View original record | SPECIFICATION SPECIFICATION No PL532 ISSUE No 1 SHEET No 7 SEC No | TITLE | DESCRIPTION | DESIGN No | DETAILS | L.O.P. | REMARKS ---|---|---|---|---|---|--- 7008 | FRONT BUMPER & MOUNTING | | | | |… | ||
| scan0213 | Specification sheet detailing various car components, including the petrol tank, pedals, dashboard, and chassis lubrication. | ||
| View original record | SPECIFICATION SPECIFICATION No PL532 ISSUE No 1 SHEET No 8 SEC. No | TITLE. | DESCRIPTION. | DESIGN No | DETAILS | L.O.P. | REMARKS. 7085 | PETROL TANK | 8 GALLON PETROL TANK | PL427 | ✓ | RF. 2369 |… | ||
| scan0214 | Specification sheet detailing various car components, their design numbers, and associated remarks. | ||
| View original record | SPECIFICATION SPECIFICATION NO PL532 ISSUE NO 1 SHEET NO 9 SEC. NO | TITLE. | DESCRIPTION. | DESIGN NO | DETAILS | L.O.P. | REMARKS. --- | --- | --- | --- | --- | --- | --- 7142 | OIL PIPES & FITTINGS… | ||
| scan0215 | Specification sheet detailing various vehicle components and their requirements. | ||
| View original record | SPECIFICATION SPECIFICATION No PL532 ISSUE No 1 SHEET No 10 SEC. No | TITLE | DESCRIPTION. | DESIGN No | DETAILS | L.O.P. | REMARKS. 7420 | SPARES | NUMBER OF SPARES TO BE DECIDED 7430 | SPARE WHEEL… | ||
| scan0216 | Specification sheet for various electrical components including switch boxes, lamps, and regulators. | ||
| View original record | SPECIFICATION SPECIFICATION Nº PL.532 ISSUE Nº 1 SHEET Nº 11 SEC. Nº | TITLE. | DESCRIPTION. | DESIGN Nº | DETAILS | L.O.P. | REMARKS. 8160 | SWITCH BOX | STD LUCAS. 8170 | DISTRIBUTION BOARD | STD… | ||
| scan0217 | The fitting of a Lucas spare bulb holder to the Myth dashboard. | ||
| View original record | 704 To Rm. from Ev/JD. c. [REDACTED] c. [REDACTED] Ev/JD.9/SW.17.4.41. MYTH. Dashboard. We attach to Rm/HH's copy the original of PL.548 - Spare Bulb Holder - Myth. The above scheme shows the Lucas… | ||
| scan0218 | Letter to Park Ward Ltd. enclosing prints and providing instructions regarding a gear lever cutout and tunnel over the gearbox. | ||
| View original record | 704 Rm/EAG.1/ET. 21st April, 1941. Messrs. Park Ward Ltd., 473 High Road - Willesden, L O N D O N N.W. 10. Dear Sirs, Herewith two copies each of the following prints:- RB.10008 - Sheet 1 RB.10008 - "… | ||
| scan0219 | Letter to Wilmot Breeden Ltd. regarding a radiator grille blueprint and requesting stainless steel window channelling. | ||
| View original record | 704 Rm/EAG.3/ET. 22nd April, 1941. Messrs. Wilmot Breeden Ltd., Eastern Works - Camden Street, B I R M I N G H A M. Attention of Mr. Spicer. Dear Mr. Spicer, Thank you for your letter and blue print… | ||
| scan0220 | Letter to Triplex Safety Glass Ltd. regarding a template for a toughened curved back light for a hand-made sample body. | ||
| View original record | Em/EAG.3/2T. 22nd April, 1941. 704 Jack W. FOLLETT, Esq., "TRIPLEX" Safety Glass Ltd., Albermarle Street - Piccadilly, L O N D O N. W. 1. Dear Mr. Follett, Replying to your letter dated 21st April,… | ||
| scan0221 | Letter regarding modifications to folding armrest fittings and an enquiry for spring rollers for rear blinds. | ||
| View original record | 704 Rm/SAC.2/DT. 22nd April, 1941. Messrs. Hallam Sleigh & Cheston, Widney Works - Bagot Street, B I R M I N G H A M. 4. Attention of Mr. Whitehouse. Dear Sirs, We thank you for the sample pair of… | ||
| scan0222 | Confirming a verbal arrangement for interior fittings on the sample Myth body to be finished in semi-dull chrome. | ||
| View original record | To Rm. from Rm/EAG. C. to Ev. Ev/JD. Rm/HH. This confirms the verbal arrangement with Rm. that all interior fittings on the sample Myth body are to be finished in semi-dull chrome, as sample handle… | ||
| scan0223 | The modified position of a gastight seal on a steering column for the 'Myth' dashboard. | ||
| View original record | 704 (Handwritten) 1030 (Handwritten) To Rm. from Ev/JD. Copy to Ev. Rm/HH. (Struck through) Rm/EAG. (Struck through) Ev/JD.6/ET.29.4.41. MYTH Dashboard. ---------- We attach to Rm/HH's copy the… | ||
| scan0224 | Letter to a supplier requesting a dull chrome finish for a windscreen's inner flange to reduce sun glare. | ||
| View original record | 104 30th April, 1941. Rm/EAG.12/ET. Perfecta Motor Equipment, Excelsior Works, Oxford Street, B I R M I N G H A M, 5. Attention of Mr. Bach. Dear Sirs, With reference to the windscreen which you have… | ||
| scan0225 | Confirming the verbal arrangement for the finish of interior fittings on the sample Myth body. | ||
| View original record | 704 To Rm. From Rm/SAG. C. to Ev. Ev/JD. Rm/HH. Rm/SAG.16/EF.30.4.41. This confirms the verbal arrangement with Rm. that all interior fittings on the sample Myth body are to be finished in semi-dull… | ||
| scan0226 | Letter to Messrs. Park Ward, Ltd. detailing blueprints being sent for the Myth body. | ||
| View original record | 704 Rm/EAG.15/ET. 30th April, 1941. Messrs. Park Ward, Ltd., 473 High Road, Willesden, LONDON N.W. 10. Dear Sirs, We are sending you herewith, for the Myth body, blue prints, as follows:- (two copies… | ||
| scan0227 | Letter to Wilmot Breeden Ltd. regarding sample handles, knobs, and window regulators. | ||
| View original record | 704 Rn/EAG.13/LT. 30th April, 1941. Messrs. Wilmot Breeden, Ltd., Eastern Works - Camden Street, B I R M I N G H A M. For the attention of Mr. Spicer. Dear Mr. Breeden, Thank you for the sample… | ||
| scan0228 | Confirming the dispatch of Parcel No. 76 containing a list of prints for storage at Ashby. | ||
| View original record | To Mr. Atkins (Strong Room), Derby. Copy to Mtn. Rm/AH. 704 Rm/EAG.1/ST.1.5.41. ASHBY PRINTS. Please receive herewith Parcel No. 76, containing the following prints, for storage at Ashby:- RB.10008 -… | ||
| scan0229 | Letter to a supplier clarifying the dimensions required for carpet edging samples. | ||
| View original record | 704 2nd May, 1941. Rm/EAG.2/ET. C.T. CRIPS Esq., Pianoforte Supplies Ltd., Simplex Works, R O A D E, Northants. Dear Mr. Cripps, Thank you for your letter of 1st May, with reference to carpet edging.… | ||
| scan0230 | Letter to Connolly Bros. Ltd. requesting 4 Luxan grain hides to match a supplied cutting of leather cloth, with a personal note about the blitz. | ||
| View original record | 704 Rm/EAG.10/ET. 5th May, 1941. F. CONOLLY Esq., Messrs. Conolly Bros., Ltd., Chalton Street - Euston Road, LONDON N. W. 10. Dear Mr. Conolly, Will you please supply us with 4 hides to match the… | ||
| scan0231 | Letter to Wilmot-Breeden Ltd confirming arrangements for fittings on the 'Myth' body, now known as M.40. | ||
| View original record | 704 8th May, 1941. Rm/EAG.9/ET. Messrs. Wilmot-Breeden Ltd., Eastern Works, Camden Street, BIRMINGHAM. Attention of Mr. Spicer. Dear Mr. Spicer, Confirming the arrangement made during your visit… | ||
| scan0232 | Typed letter discussing modifications to handles, window fittings, and striking plates. | ||
| View original record | Mm/SAG.9/ST.8.5.41 - 2 - 8. You will redesign the handles for the spare wheel locker lid, to correspond with the door handles. 9. It was arranged that you would proceed with the manufacture of the… | ||
| scan0233 | Letter to a supplier regarding modifications to sample seat fittings. | ||
| View original record | 704 12th May, 1941. Rm/EAG.12/LT. Messrs. Chapman Ltd., Ranelagh Gardens, Hurlingham, LONDON S.W. 6 Dear Sirs, We thank you for the sample seat fittings, of which we consider the Line Contact type to… | ||
| scan0234 | Follow-up letter to Empire Rubber Company regarding an overdue sample of a door seal. | ||
| View original record | 704 Rm/EAG.1/LT. 13th May, 1941. Empire Rubber Company, DUNSTABLE. Beds. Dear Sirs, Will you please let us know when we may expect the further sample of door seal to our drawing No. RB.18003,… | ||
| scan0235 | Letter to Metal Mouldings Ltd. regarding the unavailability of aluminium running board treads and acknowledging receipt of steel section samples. | ||
| View original record | 104 Rm/EAG.2/ET. 15th May, 1941. Metal Mouldings Ltd., Park Royal Road, LONDON, N.W. 10. Dear Sirs, We thank you for your letter of 13th May, with reference to running board treads in aluminium. We… | ||
| scan0236 | Letter to Messrs. Neales of Coventry confirming arrangements for the production of laminated bends and seat valances. | ||
| View original record | 704 Rm/EAG.4/LT. 15th May, 1941. Messrs. NEALES, New Buildings, C O V E N T R Y. Dear Sirs, Confirming our visit to your works yesterday, May 14th, and our interview with your Mr. Braim, it was… | ||
| scan0237 | List of materials for the M.40 Body, detailing the parts, their suppliers, and who obtained them. | ||
| View original record | 704 MATERIALS FOR M.40 BODY Rm/BAG.6/ST.16.5.41. No. | DESCRIPTION | PURCHASED FROM. | OBTAINED BY R.R. | OBTAINED BY P.W. | REMARKS. 1. | Windscreen & hinges. | Perfecta Motor Equipment. | | | 2. | "… | ||
| scan0238 | List of vehicle components with their corresponding suppliers and procurement details. | ||
| View original record | No. DESCRIPTION. PURCHASED FROM. OBTAINED BY R.R. F.M. REMARKS. 17. Spare Wheel Lid Locks. Wilmot-Breeden. x 18. Rear Number Plate. 19. Door Outside Handles. Wilmot-Breeden. x 20. " Inside " " 21.… | ||
| scan0239 | List of vehicle components, their suppliers, and procurement details. | ||
| View original record | No. | DESCRIPTION | PURCHASED FROM | OBTAINED BY R.R. | OBTAINED BY F.W. | REMARKS --- | --- | --- | --- | --- | --- 35. | Carpets etc. | Turner. | | | 36. | Leather. | Connolly. | | | 37. |… | ||
| scan0240 | List of numbered parts with descriptions and the suppliers from which they were purchased. | ||
| View original record | Em/BAG.6/ST.16.5.41 - 4 - No. DESCRIPTION PURCHASED FROM OBTAINED BY R.R. P.W. REMARKS 51. Millboard for Sliding Roof. Jacksons Millboard. 52. " " Front Seats. " 53. Leathercloth. Rexine. 54. Fly… | ||
| scan0241 | Letter to S. SMITH & Sons Ltd. discussing instruments and a delay in panel design due to war work. | ||
| View original record | Private & Confidential. CAR Rm.3/ET. 20th May, 1941. 704 C.W. NICHOLS, Esq., Messrs. S. SMITH & Sons, Ltd., Cricklewood Works, LONDON, N.W. 2. Dear Nichols, Thank you for your letter of 14th May. I… | ||
| scan0242 | Letter to Messrs. Park Ward Ltd. discussing progress on the 'Myth' chassis frame and a new lightened body for the 'Bentley V'. | ||
| View original record | c. to Ev. Rm/EAG. EV/JD. Rm/Wym. 704 Rm.1/MH. 20th May, 1941. C.W. Ward Esq., Messrs. Park Ward Ltd., 473, High Road, Willesden, LONDON. N.W.10. Dear Ward, MYTH. I was very pleased with your progress… | ||
| scan0243 | Short, typed memo concerning an offer of production work during the war. | ||
| View original record | -Continued- War Production. If I can put any production work on your plate during the war, I will do so. Yours faithfully, | ||
| scan0244 | Request to collect finished parts of the Myth engine and a redesigned gearbox for exhibition at a meeting. | ||
| View original record | 704 Rm.1/ST.10.5.41. M Y T H. --------- We are collecting at the Clan Foundry the various pieces of the Frame and body of the Myth which have so far been completed. We should like to have on show at… | ||
| scan0245 | Letter to Messrs. Park Ward Ltd. concerning a carpet sample and a ventilating window regulator. | ||
| View original record | 704 2nd June, 1941. Rm/EAG.2/RH. C.W. Ward Esq., Messrs. Park Ward Ltd., 473, High Road, Willesden, LONDON. N.W.10. Dear Mr. Ward, Thank you for the sample of carpet for the Myth. This appears to be a… | ||
| scan0246 | Progress report on the design and manufacturing readiness of components for a 'Myth' 4-door, 4-light sample body. | ||
| View original record | To: Rm. from Rm/EAG. Rm/EAG.2/RH.3.6.41. 704 MYTH 4-DOOR 4-LIGHT BODY. The following items require completion to form a record of the design, and to supply Messrs. Park Ward with sufficient… | ||
| scan0247 | List of required design details and modifications for various car body components. | ||
| View original record | -2- Rm/EAG.2/RH.3.6.41 -Cont- Bracket. From Windscreen Rail to Front Pillar to be designed and detailed. Dash Panel. Drilling details to be supplied by Rm/HH. ---------------- Floor. Front floor and… | ||
| scan0248 | List of design requirements and modifications for the rear end of a vehicle body. | ||
| View original record | -3- Rear End. Rear Wings. Surface of rear wings to be re-developed to conform with near side wing on 1/4 scale model. Detail drawing required. Recess and door to accomodate concealed Petrol Filler to… | ||
| scan0249 | List of required modifications and detailing for various car components. | ||
| View original record | -4- Rm/EAG.2/RH.6.6.41. Trafficators. Lucas to be supplied with drawing showing modification to fixing plate. Jacking. Reinforcement in side sill to be detailed. Centre Armrest. Folding fitting to be… | ||
| scan0250 | Design completion and manufacturing status report for the 'Myth' 4-door 4-light body. | ||
| View original record | To: Rm. from Rm/EAG. 704 Rm/EAG.2/RH.3.6.41. MYTH 4-DOOR 4-LIGHT BODY. The following items require completion to form a record of the design, and to supply Messrs. Park Ward with sufficient… | ||
| scan0251 | List of required design modifications and tasks for various car body components. | ||
| View original record | -2- Rm/EAG.2/RH.3.6.41 -Cont- Bracket. From Windscreen Rail to Front Pillar to be designed and detailed. ----------------- Dash Panel. Drilling details to be supplied by Rm/HH. -----------------… | ||
| scan0252 | Design specifications for the rear end of a vehicle, including wings, doors, and accessories. | ||
| View original record | -3- Rear End. Rear Wings. Surface of rear wings to be re-developed to conform with near side wing on ¼ scale model. Detail drawing required. Recess and door to accomodate concealed Petrol Filler to be… | ||
| scan0253 | List of action items for various car components including trafficators, jacking points, and seats. | ||
| View original record | -4- Rm/EAG.2/RH.6.6.41. Trafficators. Lucas to be supplied with drawing showing modification to fixing plate. Jacking. Reinforcement in side sill to be detailed. Centre Armrest. Folding fitting to be… | ||
| scan0254 | Letter to Park Ward Co., Ltd. enclosing blueprints for the 'Myth' chassis frame and front pan. | ||
| View original record | COPY. 704 Ev/JD.14/JH. c TO RM Messrs. Park Ward Co., Ltd., 473, High Road, Willesden, LONDON N.W.10. For the attention of Mr. C. Ward. Dear Sirs, MYTH. In accordance with memo Rm.6/ET. 28th May,… | ||
| scan0255 | Letter to C.W. Ward of Park Ward Ltd. arranging the collection of Myth pieces. | ||
| View original record | Rm.4/ET. 5th June, 1941. 704 C.W. WARD, Esq., Messrs. Park Ward Ltd., 473 High Road - Willesden, L O N D O N, N.W. 10. Dear Ward, Thank you for your letter of May 30th. We hope to come down and… | ||
| scan0256 | Letter to Messrs. Park Ward & Co. Ltd. regarding drawings for the Myth Chassis front pan assembly. | ||
| View original record | c. to Rm. (Rm/HH.) 704 Ev/JD.4/JH. 7th. June, 1941. Messrs. Park Ward & Co.Ltd., 473, High Road, Willesden, LONDON. N.W.10. For the attention of Mr. C.Ward. Dear Sirs, re Myth Chassis. Further to our… | ||
| scan0257 | Message from Robotham to Ward requesting the completion of the 'Myth front fan' by the following Monday. | ||
| View original record | 704 16.6.41. PHONED Ward, Warenpar, Willroad, Kondon. Can you complete Myth front fan by Monday of next week. stop If so I shall be in London and will call for it. Robotham. | ||
| scan0258 | Letter to a supplier regarding design points for locks on the Myth rear door. | ||
| View original record | 1021 704 Rm/EAG.16/SW. 16th June, 1941. Messrs. Wilmot Breeden, Ltd., Eastern Works, Camden Street, BIRMINGHAM. For the attention of Mr. Spicer. Dear Mr. Spicer, Confirming our telephone conversation… | ||
| scan0259 | Issues with window regulators and chromium-plated mouldings on doors. | ||
| View original record | -cont'd- - 2 - Rm/EAG.16/SW.16.6.41. (4) link to get out of the way of the window regulator and fixing screws for the chromium plated body mouldings which will be very likely to cause rattles. I am… | ||
| scan0260 | Letter from Park Ward & Co Ltd regarding a four-week completion time for the 'Myth' front pan due to a delay in receiving drawings. | ||
| View original record | DIRECTORS: A. F. SIDGREAVES C. W. WARD R. W. HARVEY-BAILEY C. FALCONER F. C. HONEYMAN W. S. PACE PARK WARD & CO LTD SHEET METAL AND WOOD WORK 473 HIGH ROAD WILLESDEN LONDON N. W. 10 TELEPHONE :… | ||
| scan0261 | Authorising the increase of the diameter of holes in the Myth body mounting brackets. | ||
| View original record | 704 To Rm. from Ev/DB. Copy to Rm/HH. Ev. Rm/EAG. Ev/DB.10/ET.23.6.41. BODY MOUNTING BRACKETS - MYTH. -------------------------- It has been agreed with Rm/EAG. that the present 7/8" dia-meter holes… | ||
| scan0262 | The increase in diameter of holes for Hythe body mounting brackets. | ||
| View original record | 404 Copy to Rm/HH. Ev. Rm/EAG. Ev/DB.10/ST.23.6.41. BODY MOUNTING BRACKETS - HYTHE. ------------------------------- It has been agreed with Rm/EAG. that the present 3/4" dia- meter holes in the Hythe… | ||
| scan0263 | Letter from Park Ward & Co. Ltd to W.A. Robotham, enclosing a Progress Report concerning the 'Myth' project. | ||
| View original record | DIRECTORS: A.F.SIDGREAVES C.W.WARD R.W.HARVEY-BAILEY C.FALCONER C.HONEYMAN W.S.PAGE TELEPHONE: WILLESDEN 2595 (5 LINES) TELEGRAMS: WARENPAR WILLROAD LONDON YOUR REF............ OUR REF....CWW/WH....… | ||
| scan0264 | Progress report tracking the completion status of jigs and components for various vehicle parts. | ||
| View original record | PART No | DESCRIPTION | DATE STARTED | PROGRESS JIGS | DATE STARTED | COMPONENTS PROGRESS | REMARKS RB.10008 | Body Underframe. Sht. 1. | | Completed | | Completed | Jigs and Components to be modified… | ||
| scan0265 | Progress chart tracking the completion status of jigs and components for various part numbers. | ||
| View original record | PART N.o | DESCRIPTION | JIGS PROGRESS | DATE STARTED | COMPONENTS PROGRESS | DATE STARTED | REMARKS RF.2253 | Top Stiffening Plate | Completed | | Completed | | Completed for both chassis RF.2254 |… | ||
| scan0266 | Progress log for Jigs and Components, listing part numbers, descriptions, and completion status. | ||
| View original record | PART Nº DESCRIPTION DATE STARTED PROGRESS Jigs 20 40 60 80 100 DATE STARTED COMPONENTS PROGRESS 20 40 60 80 100 REMARKS. RB.15101 | Panel Roof Side RB.13006 | Panel Dash Ass. X RB.10117 | Rear Comp.… | ||
| scan0267 | Progress report tracking the completion of jigs and components for various parts. | ||
| View original record | PART No, DESCRIPTION, DATE STARTED, PROGRESS JIGS, DATE STARTED, COMPONENTS PROGRESS, REMARKS. ,, 20 40 60 80 100,, 20 40 60 80 100, RB.10008/3, Wheel Arch Mounting Brkt.R.H., 11-4-41, Completed, ,… | ||
| scan0268 | Progress chart for a Stiffening Bracket Left Hand Front Cross Member. | ||
| View original record | PART N으: RF.2386 DESCRIPTION: Stiffening Brkt. L.H. Front Cross Member PROGRESS JIGS: Completed COMPONENTS PROGRESS: Completed HEADERS: PART N으, DESCRIPTION, DATE STARTED, PROGRESS JIGS, 20, 40, 60,… | ||
| scan0269 | Letter to Park Ward Ltd. enclosing prints for the Front Wing Stay L & R.H. and noting the use of American projection. | ||
| View original record | Rm/RG.1/RH. 704 1st July, 1941. Messrs. Park Ward Ltd., 473, High Road, Willesden, LONDON. N.W.10. Attention Mr.C.Ward. Re: Myth. Dear Sir, Enclosed herewith, please find prints in duplicate of the… | ||
| scan0270 | Letter to Park Ward Ltd. enclosing drawings for a Front Wing Rear Shield and an arrangement of Locks, Dovetails & Bumpers. | ||
| View original record | 704 Hm/RG.1/RH. 2nd July, 1941. Messrs. Park Ward Ltd., 473, High Road, Willesden, L O N D O N. N.W.10. Attention Mr.C.Ward. Re Myth. Dear Sirs, Please find enclosed herewith the following drawings :-… | ||
| scan0271 | Request to send the wooden former for Myth front seats to Messrs. Jackson, Millboard & Fibre Co., Ltd. | ||
| View original record | To: Rm/Wym. from Rm/EAG. 704 Rm/EAG.1/RH.8.7.41. Will you please arrange to have the wooden former which was made for Myth front seats, sent to Messrs. Jackson, Millboard & Fibre Co., Ltd., Bourne… | ||
| scan0272 | List of 'Myth' body metal parts collected, detailing part numbers, quantities, and individual weights. | ||
| View original record | To Rm / FROM RM/WVM. 19.6.41. 704 MYTH BODY METAL PARTS COLLECTED BY ROLLS-ROYCE VAN ON 13th JUNE, 1941. Weight of One RF.2235 Frame Side Member - RH 2 Off 17 lbs 12 oz RF.2236 Frame Side Member - LH… | ||
| scan0273 | Parts list showing reference numbers, descriptions, quantities, and weights. | ||
| View original record | -cont'd- SHEET 2. Weight of One. RF.2416 Brkt. Radiator Bearing 2 Off 5½ ozs. RF.2250 Wheelarch Body Brkt - RH 2 " 6½ " RF.2251 Wheelarch Body Brkt - LH 2 " 6½ " RF.2252 Body Brkt-Centre & Front 8 " 7… | ||
| scan0274 | Letter to Park Ward, Ltd. with instructions for the finish of the first body for M.40. | ||
| View original record | 704 Rm/EAG.15/SW. 10th July, 1941. Messrs. Park Ward, Ltd., 473, High Road, Willesden, LONDON N.W.10. Dear Sirs, Herewith general instructions dealing with finish for the 1st body for M.40. Yours… | ||
| scan0275 | Progress report on the Myth Body and Chassis Framework, detailing delays due to equipment repair and other work priorities. | ||
| View original record | 704 To Rm. from Rm/EAG. Rm/EAG.2/JH.14.7.41. Report on Progress of Myth Body & Chassis Framework, also B.V. Drawings by Park Ward 12.7.41. The final assembly of the frame by spot welding has not yet… | ||
| scan0276 | Progress report on the Myth Body and Chassis Framework, including drawings by Park Ward. | ||
| View original record | 704 To Rm. from Rm/EAG. Rm/EAG.2/JH.14.7.41. Report on Progress of Myth Body & Chassis Framework, also B.V. Drawings by Park Ward 12.7.41. The final assembly of the frame by spot welding has not yet… | ||
| scan0277 | Letter to Park Ward & Co. enclosing blueprints for the 'Myth' car. | ||
| View original record | 704 Rm/EAG.8/SW. 16th July, 1941. Messrs. Park Ward & Co., 473, High Road, Willesden, LONDON N.W.10. For the attention of C.W. Ward, Esq. Dear Sirs, re:- Myth. Enclosed herewith please find blueprints… | ||
| scan0278 | Letter to Messrs. Park Ward Ltd. enclosing prints for the 'Myth' body and discussing a locking arrangement for the petrol filler. | ||
| View original record | 704 19th August, 1941. Rm/RG.1/RH. Messrs. Park Ward Ltd., 473, High Road, Willesden, L O N D O N. N.W.10. Attention of Mr.C.W.Ward. Dear Sirs, Re Myth. Enclosed herewith please find prints for the… | ||
| scan0279 | Letter to Park Ward Ltd. concerning the construction of the 'Myrth Bonnet' side hinge. | ||
| View original record | 704 19th August, 1941. Rm/RG.S/RH. Messrs. Park Ward Ltd., 473, High Road, Willesden, L O N D O N. N.W.10. Attention of Mr.C.W.Ward. Dear Sirs, Re Myrth Bonnet Further to our letter of even date and… | ||
| scan0280 | Letter to C.W. Ward regarding the design of project 4.B.50 and the importance of a meeting in Derby. | ||
| View original record | 704 20th August, 1941. Rm.1/RH. C.W. Ward Esq., Messrs. Park Ward Ltd., 473, High Road, Willesden, L O N D O N. N.W.10. Dear Ward, We are very pleased with the look of 4.B.50, now that you have… | ||
| scan0281 | Letter to Park Ward & Co. regarding revised instructions and material specifications for a 4 Light Body. | ||
| View original record | 704. Rm/EAG.6/EW. 21st August, 1941. C.W. Ward, Esq., Messrs. Park Ward & Co., Ltd., 473, High Road, Willesden, LONDON N.W.10. Dear Mr. Ward, We are sending you herewith a revised copy of General… | ||
| scan0282 | Letter to Messrs. Park Ward, Ltd. detailing a list of enclosed duplicate prints for the job 'MYHT'. | ||
| View original record | 704 Em/RG.11/ET. 26th August, 1941. Messrs. Park Ward, Ltd., 473, High Road, Willesden, LONDON. N.W. 10. Dear Sirs, re MYHT. Enclosed herewith, please find further prints for the above job, as… | ||
| scan0283 | Letter to Park Ward & Co. regarding required body mounting parts for project 'Myth'. | ||
| View original record | 704 27th August, 1941. Rm/RG.1/RH. Messrs. Park Ward & Co., Ltd., 473, High Road, Willesden, LONDON. N.W.10. Attention of Mr.C.W.Ward. Dear Sirs, Re: Myth Further to our letter of the 19th instant,… | ||
| scan0284 | Letter to Park Ward Ltd. enclosing duplicate prints for a car body. | ||
| View original record | 704 Rm/EAG.10/RH. 3rd September, 1941. Messrs. Park Ward Ltd., 473, High Road, Willesden, LONDON. N.W.10. Attention of Mr.Ward. Dear Sirs, MYTH Please find enclosed herewith the following prints for… | ||
| scan0285 | Progress report on body work by Park Ward concerning the 'Myth' project and 'Rationalized Bodies'. | ||
| View original record | To: Rm. from Rm/EAG. Rm/EAG.1/RH.18.8.41. REPORT ON PROGRESS OF BODY WORK BY PARK WARD MYTH [Handwritten: 704] [Handwritten: 404] No further work has been done on this since the meeting on June 24th,… | ||
| scan0286 | Project delays, supplier coordination for drawings and jigs, and modifications for a vehicle body. | ||
| View original record | -2- REMARKS It will be seen that practically nothing has been done on Myth since the end of June, and as it will take at least 3 months to complete, even if the promise to get men working on the job… | ||
| scan0287 | Progress report on body work being undertaken by Park Ward for the Myth, B.V., and Senior Range models. | ||
| View original record | To: Rm. from Rm/EAG. 704 Rm/EAG.1/RH.18.8.41. REPORT ON PROGRESS OF BODY WORK FOR PARK WARD. MYTH No further work has been done on this since the meeting on June 24th, with the exception of parts for… | ||
| scan0288 | Project delays, the need for jigs and drawings for suppliers, and modifications for a lightened body. | ||
| View original record | -2- REMARKS. It will be seen that practically nothing has been done on Myth since the end of June, and as it will take at least 3 months to complete even if the promise to get men working on the job… | ||
| scan0289 | Description of the contents of four drawing sheets for the Morphics Side Frame. | ||
| View original record | 704. From: ROLLS ROYCE LIMITED, DERBY. 17.9.41. HB.11101/2 - MORPHICS SIDE FRAME - SHEETS 1.2.3.4. Despatched 17.3.41 and acknowledged 19.3.41. Sheet 1. Shows side elevation of frame at front end, to… | ||
| scan0290 | Letter to Messrs. Park Ward Ltd. regarding the dispatch of body fittings for M.40. | ||
| View original record | FILE 704. Rm/EAG.5/RH. 18th September, 1941. Messrs. Park Ward Ltd., 473, High Road, Willesden, LONDON. N.W.10. Dear Sirs, We are sending to you under separate cover, body fittings for M.40 as per… | ||
| scan0291 | List of fittings to Park Ward & Co. Ltd. | ||
| View original record | FROM: ROLLS ROYCE LIMITED. DERBY. 18.9.41. LIST OF FITTINGS TO PARK WARD & CO.LTD. 1. R.H. Front Door Lock. 2. R.H. Front Door Regulator. 3. R.H. Rear Door Lock. 4. R.H. Rear Door Regulator. 5. R.H.… | ||
| scan0292 | Letter to A.W. Chapman Ltd. confirming an order for Mark 27 Seat Fittings with specific hand requirements. | ||
| View original record | Rm/EAG.3/RH. 18th September, 1941. 704. Messrs. A.W. Chapman Ltd., Ranelagh Gardens, Hurlingham, S.W.6. Dear Sirs, Confirming our telephone conversation with your Mr.Summers this morning regarding two… | ||
| scan0293 | Internal memorandum requesting the despatch of non-chargeable body fittings for M.40 to Park Ward. | ||
| View original record | To: Rm/Wym. from Rm/EAG. Rm/EAG.4/RH.18.9.41 704, Will you please arrange for body fittings for M.40 herewith to be packed and despatched to Park Ward. These are not chargeable to them. List of… | ||
| scan0294 | Commenting on a draught report concerning work in hand for body manufacturer Park Ward. | ||
| View original record | 704 404 To Rm. from Rm/EAG. Rm/EAG.7/SW.20.9.41. Comments on Draught Report dealing with the position of work in hand for us by Park Ward. On page (2) it states that completed drawings have been… | ||
| scan0295 | Scrapping of faulty parts and the need to supply Park Ward with jigs or drawings to prevent reoccurrence. | ||
| View original record | -cont'd- - 2 - Rm/EAG.7/SW.20.9.41. Now that they have scrapped a lot of the faulty parts which they had made, it is up to Park Ward to do everything possible to help them by supplying any jigs or… | ||
| scan0296 | Progress report on the 'Myth' experimental car, detailing delays with the frame and coachwork. | ||
| View original record | Myth Coachwork To Sg. & Hs. from Rm. Copy to Rm/EAG. 704 MYTH EXPERIMENTAL CAR It will be remembered that, at the last meeting at the Clan Foundry, on 25th June, two Myth frames were inspected. They… | ||
| scan0297 | The 'Myth' project, staffing issues, the war effort, and post-war planning with coachbuilder Park Ward. | ||
| View original record | Em.2/LT.22.9.41 - 2 - We suggested to Ward (we can do no more, we have no authority) that if the efforts being exerted at Derby to keep the Myth project moving were not to be negatived, he should have… | ||
| scan0298 | Lack of progress and various issues with the B.V. body production and associated drawing work. | ||
| View original record | Rm.2/ET.22.9.41 - 3 - We have tried to suggest (you have had copies of most of the memos) what ought to be done if possible during the war, and left Giles behind (he was taken on the Derby staff by… | ||
| scan0299 | Capacity constraints due to the 'Myth' project and its impact on the coachwork for the 'Senior Range' of cars. | ||
| View original record | Em.2/ST.22.9.41 - 4 - In view of the responsibilities in connection with the Ministry of Supply assumed by the technical staff of the Chassis Division, it will be appreciated that getting the Myth… | ||
| scan0300 | Future car design, covering topics like air conditioning, lightened bodies, and specific car models. | ||
| View original record | C O P Y. To Sg. Hn.5/ES.18.7.41. FUTURE CAR DESIGN. Your Sg.5/KW.23.6.41 to Tr. and its attachment were handed to me, together with copies of the earlier correspondence on the same matter. I have… | ||
| scan0301 | Request from Park Ward's for a permit to purchase ash wood and a certificate for wing manufacturing. | ||
| View original record | To Rm. from Rm/EAG. 704 Rm/EAG.1/ET.24.9.41. Mr. Emms, Buyer at Park Ward's telephoned this morning, asking that we should supply a permit for them to purchase 20 cu.ft. of ash to be used for jigs for… | ||
| scan0302 | Letter to Messrs. Wilmot-Breede, Ltd. regarding undelivered glass channels for rear door window regulators. | ||
| View original record | 704 1021 Rm/EAG.3/ET. 25th September, 1941. Messrs. Wilmot-Breede, Ltd., Eastern Works, Camden Street, B I R M I N G H A M. Attention of Mr. Spicer. Dear Mr. Spicer, This is to remind you that we have… | ||
| scan0303 | Letter to Messrs. Park Ward Ltd. detailing amendments to various drawings. | ||
| View original record | Fm/EAG.5/PH. 704 25th September, 1941. Messrs. Park Ward Ltd., 473, High Road, Willesden, LONDON. N.W.10. Attention of M.C.W.Ward. Re: Myth Dear Sirs, We enclose herewith the following prints :-… | ||
| scan0304 | Letter from Park Ward & Co Ltd chasing a permit for hardwood for 'Myth' coachwork. | ||
| View original record | Myth Coachwork- DIRECTORS: A.F. SIDGREAVES C.W. WARD R.W. HARVEY-BAILEY C. FALCONER F.C. HONEYMAN W.S. PAGE TELEPHONE. WILLESDEN 2595 (6 LINES) TELEGRAMS. WARENPAR-WILLROAD-LONDON PARK WARD & CO LTD… | ||
| scan0305 | Letter from Park Ward & Co Ltd to W. A. Robotham regarding a visit from a Mr. Draper. | ||
| View original record | DIRECTORS: A. F. SIDGREAVES C. W. WARD R. W. HARVEY-BAILEY C. FALCONER F. C. HONEYMAN W. S. PAGE TELEPHONE: WILLESDEN 2595 (6 LINES) TELEGRAMS: WARENPAR WILLROAD LONDON PARK WARD & CO LTD SHEET METAL… | ||
| scan0306 | Response to a report regarding issues with drawing details, the shrinkage of blueprints, and the creation of new drawings for wing jigs. | ||
| View original record | COPY. 404 704 1212 To Rm. from Rm/EAG. Rm/EAG.13/ET.14.10.41. Regarding the report herewith from Ward to Sg., while there are several things in it that I could criticise, the outstanding thing is item… | ||
| scan0307 | Outlining the procedure and estimated time to produce four and six light bodies for Silver Phantom chassis. | ||
| View original record | C O P Y. To Rm. from Rm/EAG. Rm/EAG.3/ET.21.10.41. Herewith a brief summary of the recommended procedure and estimated time required to prepare for the pro-duction of four and six light bodies for… | ||
| scan0308 | Production procedure for rationalised Silver Phantom bodies. | ||
| View original record | C O P Y. PRODUCTION OF RATIONALISED SILVER PHANTOM BODIES. The recommended procedure for dealing with the preparation for production of six and four light bodies, and the estimated time for doing the… | ||
| scan0309 | Visit to Messrs. Park Wards to locate full-scale drawings for R.R. & Bentley models. | ||
| View original record | COPY. To Rm. c. to Ev. c. to Rm/EAG. c. to Rm/Wym. Ev/JD/4/JH.21.10.41. Drawings of R.R. & Bentley Cars at Messrs. Park Wards. During our visit to Messrs. Park Wards Thursday 16th, October, 1941 the… | ||
| scan0310 | List of car models detailing their respective drawing numbers and body construction materials. | ||
| View original record | - 2 - EV/JD.4/JH.21.10.41. B.V. Models. 7.B.V. (1.B.5). R.R. drawing FD.20. - All metal construction. 8.B.V. (2.B.5). R.R. drawing FD.95 - All metal construction. 9.B.V. (3.B.5). R.R. drawing FD.206 -… | ||
| scan0311 | The Silver Ripplet model and assigning large scale drawings of an experimental car to Park Wards. | ||
| View original record | - 3 - Ev/JD.4/JH.21.10.41. Silver Ripplet. 2.R.2. R.R. drawing FD.494 wood and alum construction. These should be full scale F.W. drawings of all the above models. Ev/JD. Please note. Since writing… | ||
| scan0312 | Letter to F. Connolly regarding the supply and matching of Vaumol hides to Rexine. | ||
| View original record | Rm/EAG.9/ET. 21st October, 1941. F. CONNOLLY, Esq., Wandle Bank, Wimbledon, LONDON S.W. 19. 704 Dear Mr. Connolly, Although I have been in London several times since I last wrote to you, I have been… | ||
| scan0313 | Letter to Hairlok Co. Ltd. regarding wood models for arm rests and a missing Seatex sample. | ||
| View original record | 704 1021 Rm/EAG.1/ET. 22nd October, 1941. Messrs. Hairlok Co. Ltd., Magna Works, B E D F O R D. Attention of L.E. Howard Esq. Dear Sirs, Confirming our telephone conversation with your Mr. Riteh… | ||
| scan0314 | Arranging for the packing and forwarding of wooden patterns for side and centre arm rests. | ||
| View original record | To Rm/Wym. from Rm/EAG. 704 Rm/EAG.3/ET.22.10.41. Herewith wooden paterns of side and centre arm rests. Will you please arrange for these to be packed and forwarded to The Hairlok Company Ltd., Magna… | ||
| scan0315 | Order for 4 sets of moulded hair arm rests from The Hairlok Company Ltd. | ||
| View original record | 704 To Roy/AES. from Rm/EAG. Rm/EAG.2/ET.22.10.41. Will you please order from The Hairlok Company Ltd., Magna Works, B E D F O R D 4 sets of moulded hair arm rests to wooden patterns supplied by us.… | ||
| scan0316 | Clarifying an order for moulded air arm rests, reducing the quantity from 4 to 2 sets. | ||
| View original record | To Roy/AES. from Rm/EAG. 704 1821 Rm/EAG.1/ET.23.10.41. You will probably receive an unsigned memo from me , ref. Rm/EAG.2/ET.22.10.41 requesting you to order from The Hairlok Company Ltd., Magna… | ||
| scan0317 | Letter to Messrs. Park Ward, Ltd. regarding the dispatch of drawing prints for a sliding roof and steering column bracket. | ||
| View original record | 704 Rm/EAG.2/ET. 28th October, 1941. Messrs. Park Ward, Ltd., 473, High Road, Willesden, L O N D O N, N.W. 10. Dear Sirs, As requested, we are sending you herewith a blue print of drawing No.… | ||
| scan0318 | Letter from Park Ward & Co. Ltd confirming a telegram and requesting urgent delivery of various gauges of sheet metal. | ||
| View original record | DIRECTORS: A.F. SIDGREAVES C.W. WARD R.W. HARVEY-BAILEY C. FALCONER F.C. HONEYMAN W.S. PAGE TELEPHONE: WILLESDEN 2595 (6 LINES) TELEGRAMS: WARENPAR-WILLROAD-LONDON PARK WARD & CO. LTD SHEET METAL AND… | ||
| scan0319 | Requesting to hold all machining for rear and front hubs for the M.40 Test Rig pending a modified design. | ||
| View original record | To HPS. from Rm/HH. c. to Rm. c. to ~~HPS/HJ.~~ c. to ~~HPS/Hr.~~ 704. Rm/HH.3/SW.30.10.41. M.40 Test Rig. Due to the fitting of Lockheed standard carrier plates to the experimental chassis, please… | ||
| scan0320 | Notes and a visit concerning rationalised and experimental saloon bodies. | ||
| View original record | To: Sg. from Rm. Rm. 2/h. 30.10.41. 404 704 1212 Herewith copies of Green's note with reference to Wards' letter CW/GC. October 7th, which I discussed with you last Saturday, October 25th, also a copy… | ||
| scan0321 | Letter concerning a new panel lay-out drawing, third party interests, and a sample of a flush-mounted ash tray. | ||
| View original record | S. Smith & Sons (M.A.) Ltd. Telephone: Gladstone 3333 Telegraphic Address: Speedofac, Phone, London. Cricklewood Works, London, N.W.2 [Handwritten in pencil top right]: Car [Handwritten in red ink]:… | ||
| scan0322 | Meeting minutes regarding the instrument board design for the 'Myth' car with Messrs. S. Smith & Sons. | ||
| View original record | To Rm. c to [redacted] c to [redacted] c to Mr. Nicholls. Messrs. S. Smith & Sons. Car Ev/JD.15/JH./h. 30.10.41. 704 VISIT OF MESSRS. S. SMITH & SONS. Tuesday 28th Oct. 1941. During the visit of Mr.… | ||
| scan0323 | Specifications for the instrument panel, switch-box, and auxiliary controls. | ||
| View original record | - 2 - (a) The instruments will be similar to the two shewn on the Rolls-Royce painting, except that the clock should be incorporated in the instrument dial and not the speedometer dial as shewn. These… | ||
| scan0324 | Letter to Messrs. S. Smith & Sons confirming the dispatch of a blueprint for a proposed instrument board. | ||
| View original record | 704. c. to Rm. c. to Ev. c. to Rm/EAG. Ev/JD.14/JH. 30th. October, 1941. Messrs. S. Smith & Sons (M.A.) Ltd., Cricklewood Works, LONDON.N.W.2. For the attention of Mr. Nicholls. Dear Sirs, re… | ||
| scan0325 | Cover letter to C. W. N. Nichols of Messrs. S. Smith & Sons regarding a discussion about the Instrument Board. | ||
| View original record | 704. Rm. 4/h. 1st November, 1941. Dear Nichols, Here is a copy of a note which records the discussion we had around the Instrument Board. It was nice to see you again - quite a breath of pre-war days!… | ||
| scan0326 | Letter discussing a projected ignition switch and the placement of an ash-tray. | ||
| View original record | Car. 704 4th November, 1941. Rm. 1/h. Dear Nichols, Thank you for your letter of the 30th October. I saw Lucas on Sunday and mentioned to him that we were receiving splendid co-operation from Messrs.… | ||
| scan0327 | Letter to Messrs. Park Ward & Co. regarding prints for a Bonnet Fastener Assembly and a Rear Wing Assembly. | ||
| View original record | 704 Rm/EAG.9/SW. 10th November, 1941. Messrs. Park Ward & Co., 473, High Road, Willesden, LONDON N.W.10. Dear Sirs, Herewith prints of Bonnet Fastener Assembly - RB.14003/4. We have no record of… | ||
| scan0328 | Letter to Park Ward & Co. regarding the fitting of a water drip rail on the Myth Body, referencing specific prints. | ||
| View original record | 704 Rm/EAG.8/SW. 10th November, 1941. Mr. C. Ward, Messrs. Park Ward & Co., 473, High Road, Willesden. N.W.10. Dear Mr. Ward, Further to our discussion on Friday last, with reference to fitting a… | ||
| scan0329 | Letter clarifying a misunderstanding regarding an enclosed list for additional steel for the 'Myth' body. | ||
| View original record | 704 13th November, 1941. Rm/BAG.1/ET. C.W. WARD, Esq., Messrs. Park Ward Ltd., 473, High Road, Willesden, LONDON. N.W. 10. Dear Mr. Ward, Replying to your letter of the 11th instant with reference to… | ||
| scan0330 | Letter to Wilmot Breeden, Ltd. discussing bumper designs, bracket modifications, and an order for parts. | ||
| View original record | C. to Rm. c. to HV. c. to Rm/FJH. c. to Rm/HH. c. to Rm/Wym. 704 EV/JD.5/KC. 26th November, 1941. Messrs. Wilmot Breeden, Ltd., Eastern Works, Camden Street, BIRMINGHAM. Mynd For the attention of Mr.… | ||
| scan0331 | Progress report on the discontinued 'Myth Project (Body)' detailing the status of the layout, drawings, and hardware. | ||
| View original record | To Rm. c. to Wym. c. to Ev/JD. c. to Wym/Cr. 704 Ev/RG.8/JH.6.12.43. Myth Project (Body). As requested by you this morning, I am setting out below a detailed report shewing the progress made and the… | ||
| scan0332 | Page 2 of a parts list detailing quantities and locations for various car body components. | ||
| View original record | -2- Ev/RG.8/JH.6.12.43. 1. Bonnet fastener - 1 pair - quantity for 1 body - at Clan Foundry. 2. Door hinges - 2 sets - quantity for 2 bodies - 2 sets at Park Ward & Co.Ltd., 3. Trim pad-seats - 1 set… | ||
| scan0333 | Inventory list of car body parts, detailing quantities, conditions, and storage locations. | ||
| View original record | -3- Ev/RG.8/JH.6.12.43. 15. Trim fasteners - sufficient for several bodies if trimmed by similar methods - at Clan Fdy. 16. Armrest side - 2 sets were obtained and are in Clan Foundry (moulded hair)… | ||
| scan0334 | Numbered inventory list of vehicle body parts, specifying quantities and their assigned locations. | ||
| View original record | -4- EV/RG.8/JH.6.12.43. 35. Bonnet eye - 1 set - quantity for 1 body - at Clan Foundry. 36. Drain tube - 1 length - should be sufficient for 2 bodies - at Clan Foundry. 37. Glazing Rubber - back light… | ||
| scan0335 | Parts list for vehicle bodies, detailing quantities, suppliers, and specifications. | ||
| View original record | -5- Ev/RG.8/JH.6.12.43. 55. Striker plate - boot lock - 2 off - quantity for 2 bodies (1 at P.W.) (1 at Clan Foundry. 56. Striker plate. - door lock - 8 off - quantity for 2 bodies. (4 at P.W. (4 at… | ||
| scan0336 | Query regarding a material shortage of hardware and trimming to complete two car bodies. | ||
| View original record | -6- Ev/RG.8/JH.8.12.43. Am I in order in building up the shortage to provide sufficient hardware and trimming material to complete 2 bodies ? This is as far as the report can go at this stage. A… | ||
| scan0337 | The progress and challenges of the 'Myth Project' body construction by Park Ward. | ||
| View original record | To Rm. c. to Wym. c. to Ev. c. to Ev/JD. 704 Ev/RG.6/JH.15.12.43. Myth Project - (BODY). Further to my memo. of the 6th. inst. ref. Ev/RG.8/JH. giving the position with regard to the materials… | ||
| scan0338 | Leather supply for prototype cars with Connolly Bros. | ||
| View original record | -2- Ev/RG.6/JH.15.12.43. Contact was also made with Messrs. Connolly Bros. for leather supplies. I am assured that there will be no difficulty in obtaining supplies for our prototype cars. With… | ||
| scan0339 | Illustration of the front view of a car, focusing on the radiator grille, headlamps, and front wings. | ||
| View original record | 704 | ||