Rolls-Royce Archives
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Rolls-Royce Experimental Archives                
Choose Archive


Browsing Records        Page 1222 of 2367        Sort by   Box   Date   Description

Filter      from        to             identifier   [all]
DescriptionDateIdentifier
Phantom III vehicle (34-EX) regarding overheating issues and the fitting of a radiator wire mesh.30th Sep 1936Box 96 \ 3  scan0119
The availability of car 34-EX for investigation into heating issues.1st Oct 1936Box 96 \ 3  scan0120
Telegram from Robotham arranging for a driver to collect a trials car the next morning.2nd Oct 1936Box 96 \ 3  scan0121
Requesting the urgent return of one car to facilitate an axle change on another, with handwritten modification instructions.16th Oct 1936Box 96 \ 3  scan0122
Investigation into persistent high water temperature on car 34-EX.16th Oct 1936Box 96 \ 3  scan0123
Follow-up memo regarding fittings on Trials Car GUL-1.24th Oct 1936Box 96 \ 3  scan0124
Urgent memo chasing a reply regarding the type of piston rings fitted to Trials Car GUL-1.28th Oct 1936Box 96 \ 3  scan0125
Note confirming that trials car GUL-1 is not equipped with L shaped rings.29th Oct 1936Box 96 \ 3  scan0126
Issue with a 25/30 HP Chassis GTL.75 firing after being switched off.29th Oct 1936Box 96 \ 3  scan0127
Faulty oil cooler and squeaking O.S.F. suspension on Capt. Barnato's Ph. lll, chassis 3-AZ-88.17th Nov 1936Box 96 \ 3  scan0128
Customer complaint regarding a Phantom III, chassis No. 3-AZ-98, with oil in the cooling water.18th Nov 1936Box 96 \ 3  scan0129
Customer complaint memo regarding oil in the cooling water for Chassis 3-AZ-98 and another Phantom III.18th Nov 1936Box 96 \ 3  scan0130
Agreeing that when choosing between accessories for the Phantom III coachwork, the lighter option should always be selected.18th Nov 1936Box 96 \ 3  scan0131
London Trials for car 3-AZ-38, requesting a date for the insertion of rubber between the axle and springs, with a handwritten reply.19th Nov 1936Box 96 \ 3  scan0132
Noise reduction in a Phantom III tested on Glasgow's cobblestones, with a proposal for further improvements.18th Nov 1936Box 96 \ 3  scan0133
Confirming availability to work on a car at the earliest convenience.23th Nov 1936Box 96 \ 3  scan0134
Inquiry about the replacement of back springs and the characteristics of the new parts.14th Dec 1936Box 96 \ 3  scan0135
The oil consumption of car 34-EA for the month of November.21th Dec 1936Box 96 \ 3  scan0136
Oil consumption log for chassis No. 34 EX for the month of November.19th Dec 1936Box 96 \ 3  scan0137
Confirming exhaust boom issues on a 38-EX Long Wheelbase Phantom III car.24th Dec 1936Box 96 \ 3  scan0138
The decision not to fit an overdrive box to a Long Phantom III car.29th Dec 1936Box 96 \ 3  scan0139
Delay and gearbox change for the 38-EX Long Chassis.31th Dec 1936Box 96 \ 3  scan0140
Internal query regarding the expected arrival date for the 38-EX Long Chassis.1st Jan 1937Box 96 \ 3  scan0141
Increased oil consumption using Arctic oil during the London Trials.1st Jan 1937Box 96 \ 3  scan0142
List of modifications for car 38-EX as it enters the Fitting Shop.6th Jan 1937Box 96 \ 3  scan0143
Inquiry regarding the expected arrival of car 38-EX Long Chassis in London.7th Jan 1937Box 96 \ 3  scan0144
Inquiring about the delivery status of a Long Wheelbase Phantom III car.1st Jan 1937Box 96 \ 3  scan0145
Long Wheel Base Phantom III chassis, which is ready to be sent to London, with further comparative tests planned for a later date.13th Jan 1937Box 96 \ 3  scan0146
Comparative testing for the Long Wheelbase Phantom III vehicle.14th Jan 1937Box 96 \ 3  scan0147
Clutch 'jagger' issue for chassis 3.AX.41, with arrangements made to fit new plates.22th Jan 1937Box 96 \ 3  scan0148
Replacing experimental car 34-EX with 38-EX for comparative tests.27th Jan 1937Box 96 \ 3  scan0149
Anticipated arrival of experimental car 38-EX in London, which may be delayed due to snow and ice.30th Jan 1937Box 96 \ 3  scan0150
Sending broken rivets removed from the nearside rear brake drum of chassis No. 3-AZ-28.29th Jan 1937Box 96 \ 3  scan0151
Observations of London Trials Car 38-EX regarding oil consumption and a potential change of oil type.2nd Feb 1937Box 96 \ 3  scan0152
Car trial comparing a long wheelbase car (38-EX) against a standard model, concluding against changing the standard wheelbase.4th Feb 1937Box 96 \ 3  scan0153
Requesting parts to provide an extra 1' of pedal travel for car 38-EX.19th Feb 1937Box 96 \ 3  scan0154
Inquiry regarding the mileage of the red Continental P.III, chassis number 33-EX.3rd Apr 1937Box 96 \ 3  scan0155
The mileage history of car Phantom III - 33 EX.5th Apr 1937Box 96 \ 3  scan0156
Requesting confirmation about the mileage and extensive use of car 33-EX.6th Apr 1937Box 96 \ 3  scan0157
Car 33 EX, stating that interest has ceased and suggesting it was sent to the Paris depot.7th Apr 1937Box 96 \ 3  scan0158
Repeated tappet issues and a transmission knock on the Phantom III demonstrator, chassis 3-AZ-20.5th Apr 1937Box 96 \ 3  scan0159
Fitting of Gordon Armstrong dampers to car 33-EX.8th Apr 1937Box 96 \ 3  scan0160
Brief typed memo requesting the mileage to date for vehicle 38-EX.14th May 1937Box 96 \ 3  scan0161
Conflicting speedometer readings for Chassis No: 38-EX.15th May 1937Box 96 \ 3  scan0162
Providing the mileage for chassis 38-EX to the Inspection Department.8th Jun 1937Box 96 \ 3  scan0163
Faulty near side rear shock damper on Chassis No. 3-AZ-38 during London Trials.29th Jun 1937Box 96 \ 3  scan0164
Fitting of new rear shackle pins and bushes to Chassis No. 3-AZ-38.9th Jul 1937Box 96 \ 3  scan0165
Comparison of vehicle lap times and speeds with different wheel and tyre setups at Brooklands.6th Aug 1937Box 96 \ 3  scan0166
The work completed on trials car 3.CP.10.17th Feb 1938Box 96 \ 3  scan0167
Potential transfer of four used Dunlop Special Fort tyre covers.20th May 1938Box 96 \ 3  scan0168
Declining the use of 7.50 x 18 tyres from car 3.BU.190.23th May 1938Box 96 \ 3  scan0169
The failure of a steering box rocker shaft on a Phantom III demonstration car.14th Aug 1939Box 96 \ 3  scan0170
Broken rocker shaft on a Phantom III Paris Demonstration Car.15th Apr 1939Box 96 \ 3  scan0171
Test report on an overdrive gear for car 36-EX, detailing performance, fuel consumption, and potential overheating issues.20th Feb 1937Box 96 \ 3  scan0172
Multiple electrical failures experienced with vehicle 36-EX, including the starter, dynamo, and foot switch.22th Feb 1937Box 96 \ 3  scan0173
Dynamo fuse blowing twice, a starter fuse failure, and noisy dynamo brushes.22th Feb 1937Box 96 \ 3  scan0174
Work order for modifications to car 36 Ex, including swapping cylinder heads and replacing a cracked crankcase.22th Feb 1937Box 96 \ 3  scan0175
Report about a dynamo fuse blowing, a starter fuse failing, and noisy dynamo brushes.22th Feb 1937Box 96 \ 3  scan0176
List of five modifications for car 36-EX before it goes to London.23th Feb 1937Box 96 \ 3  scan0177
Request to fit new ignition wires to the B side of engine 36 Ex.23th Feb 1937Box 96 \ 3  scan0178
Over-drive gearbox, its ratios, and proposed changes to the gear gate layout.24th Feb 1937Box 96 \ 3  scan0179
Increased clutch pedal travel for car 36-EX to reduce pedal effort.26th Feb 1937Box 96 \ 3  scan0180
Recommendations for reducing the weight of the Spectre engine by changing component materials.4th Jul 1934Box 96 \ 4  scan0001
Note on component quantities and a proposed weight-saving design for the fan hub.4th Jul 1934Box 96 \ 4  scan0002
Efforts to reduce the weight of the Spectre engine compared to the Phantom II.4th Jul 1934Box 96 \ 4  scan0003
Plan to build a second Spectre engine using lightweight steel and magnesium components to reduce weight.4th Jul 1934Box 96 \ 4  scan0004
Secret memo from 'Sg' regarding the weight of the Spectre engine and building a second version with lightweight materials.6th Jul 1934Box 96 \ 4  scan0005
Weight reduction for the Spectre chassis by modifying the front crossmember forgings.13th Sep 1934Box 96 \ 4  scan0006
Requesting the average weight of a Saloon body fitted to a Phantom chassis for comparison purposes.14th Dec 1934Box 96 \ 4  scan0007
Engine weight reduction for the Spectre model, referencing pieces made in magnesium.29th Dec 1934Box 96 \ 4  scan0008
Weight breakdown for a 31-EX Spectre Park Ward Enclosed Limousine coachwork.1st Jan 1935Box 96 \ 4  scan0009
Calculation sheet comparing vehicle body weights with deductions and additions for various components.22th Mar 1935Box 96 \ 4  scan0010
Comparison of weights between a Narrow Pin Type and Standard Bentley crankshaft.22th Mar 1935Box 96 \ 4  scan0011
Car weight reduction by using smaller wheels and tyres.19th Mar 1935Box 96 \ 4  scan0012
Comparative table of wheel and tyre specifications and heights for various car models.19th May 1938Box 96 \ 4  scan0013
Comparative table of wheel and tyre weights and ground clearance for various car models.14th Mar 1938Box 96 \ 4  scan0014
Comparative analysis of petrol tank weights for various car models.25th Mar 1935Box 96 \ 4  scan0015
Revised matrix weights table showing weights, frontal area, depth, volume, and weight per unit volume for various models.25th Mar 1935Box 96 \ 4  scan0016
Weights for the Spectre's Front Shock Damper and Front Stabiliser.30th Mar 1935Box 96 \ 4  scan0017
List of component weights for the Spectre front shock damper and front stabiliser.29th Mar 1935Box 96 \ 4  scan0018
Table of revised matrix weights and dimensions for various models.16th Apr 1935Box 96 \ 4  scan0019
Weights obtained from the first two Spectre cars built.29th Apr 1935Box 96 \ 4  scan0020
Complete weight analysis of Spectre cars against a standard Phantom II.29th Apr 1935Box 96 \ 4  scan0021
Weight analysis of Spectre cars against a revised Phantom II long type chassis.13th May 1935Box 96 \ 4  scan0022
Cover memo for charts detailing the weights of Spectre units affected by design modifications.13th May 1935Box 96 \ 4  scan0023
List of weights for Spectre (3.5-1) spring suspension and damper components.11th May 1935Box 96 \ 4  scan0024
Continuation sheet listing the weights of various steering, pedal, and brake system components.11th May 1935Box 96 \ 4  scan0025
Continued weights sheet (Sheet 3) for the Spectre 3.5.1 model, detailing component weights.26th Jun 1935Box 96 \ 4  scan0026
List of weights for various units on the Spectre model for 10,000 miles trials.26th Jun 1935Box 96 \ 4  scan0027
Weight analysis comparing aluminium versus cast iron (C.I.) engine constructions.7th Aug 1935Box 96 \ 4  scan0028
Analysis of engine design variations, comparing valve types, and detailing the weight of an 8-cylinder engine.7th Aug 1935Box 96 \ 4  scan0029
Weights of the Spectre Chassis and its components.19th Sep 1935Box 96 \ 4  scan0030
Requesting the weight of a 33-gallon lightened petrol tank for Spectre, both as returned and with strengthened ends fitted.21th Sep 1935Box 96 \ 4  scan0031
Letter to the Automatic Products Company Ltd. regarding Lockheed Hydraulic Jacks, providing weighbridge figures for a Ph.III Saloon car.7th Nov 1935Box 96 \ 4  scan0032
Specification sheet detailing the weights of Spectre engine connecting rods and pistons.6th Nov 1935Box 96 \ 4  scan0033
Request to produce a weight chart for the Phantom III and 20/25 chassis components.29th Nov 1935Box 96 \ 4  scan0034
List of Phantom III chassis components and their corresponding weights.29th Nov 1935Box 96 \ 4  scan0035
Weight schedule form listing various vehicle components and sections.10th Jan 1936Box 96 \ 4  scan0036
Comparison of the weights of a Cadillac frame against two Phantom frames.10th Jan 1936Box 96 \ 4  scan0037
List of weights and capacities for various Buick components.18th Jan 1936Box 96 \ 4  scan0038


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙