| Description | Date | Identifier | |
| The conversion of Peregrine V shock damper glands. | 7th Jun 1933 | Box 169 \ 3 img067 | |
| Specifications for low rating Woodhead road springs for the Peregrine 6 model. | 24th Feb 1933 | Box 169 \ 3 img068 | |
| Electrical system modifications for the Peregrine chassis 6PER. | 6th May 1933 | Box 169 \ 3 img069 | |
| Inefficiency of the Peregrine brake system equalisers and requesting one for testing. | 8th Sep 1932 | Box 169 \ 3 img070 | |
| Introducing a preliminary list of points of interest for the next Peregrine chassis. | 19th Sep 1932 | Box 169 \ 3 img071 | |
| List of components and specifications for the Peregrine Chassis. | 19th Sep 1932 | Box 169 \ 3 img072 | |
| Instructions for equipping two Peregrine 2 chassis with different spring specifications. | 19th Sep 1932 | Box 169 \ 3 img073 | |
| Requesting details for fitting a rev counter drive to experimental Peregrine engines. | 26th Sep 1932 | Box 169 \ 3 img074 | |
| Request to make two spring balances for Peregrine brake servo efficiency tests. | 5th Oct 1932 | Box 169 \ 3 img075 | |
| Blueprint of a mechanical component assembly with a riveted pin and sliding fit. | 4th Oct 1932 | Box 169 \ 3 img076 | |
| Blueprint detailing specifications for a spring balance used in Peregrine servo tests. | 4th Oct 1932 | Box 169 \ 3 img077 | |
| Exhaust system details for the close-coupled Peregrine engine. | 10th Nov 1932 | Box 169 \ 3 img078 | |
| Requesting the introduction of new bushes, rocking shafts, and pistons for Peregrine shock dampers. | 11th Nov 1932 | Box 169 \ 3 img079 | |
| Ordering and modifying shock dampers for future Peregrine models. | 26th Nov 1932 | Box 169 \ 3 img080 | |
| List of modifications for building future Peregrine cars. | 26th Nov 1932 | Box 169 \ 3 img081 | |
| List of modifications and schemes for brake, shock damper, and central lubrication systems. | 26th Nov 1932 | Box 169 \ 3 img082 | |
| The status of the 'Silent second' gearbox scheme and an update on the exhaust system. | 26th Nov 1932 | Box 169 \ 3 img083 | |
| Requesting the build-up of the Peregrine exhaust system for two cars to sketch Hs.786. | 30th Nov 1932 | Box 169 \ 3 img084 | |
| Blueprint for a silencer with detailed specifications for its components and assembly. | 30th Nov 1932 | Box 169 \ 3 img085 | |
| Blueprint of a pipe fitted with a resonance chamber and a top hat type baffle for a silencer. | 8th Dec 1932 | Box 169 \ 3 img086 | |
| The brake adjustment settings and clearances for the Peregrine model. | 8th Dec 1932 | Box 169 \ 3 img087 | |
| Modifications to the Peregrine induction pipe and carburettor fitting. | 22th Dec 1932 | Box 169 \ 3 img088 | |
| Specifications for the exhaust system on 4-PER.II & 5-PER.II chassis. | 27th Jan 1933 | Box 169 \ 3 img089 | |
| Requesting sets of Peregrine brake levers with specific modifications and references. | 1st Feb 1933 | Box 169 \ 3 img090 | |
| Clutch pedals for the Peregrine model, addressing incorrect leverage and part number changes. | 14th Feb 1933 | Box 169 \ 3 img091 | |
| Fitting of a complete set of Mintex linings to Peregrine II brakes. | 3rd Mar 1933 | Box 169 \ 3 img092 | |
| Specification document for the Peregrine II Bumper Chassis listing its component parts. | 29th Sep 1932 | Box 169 \ 4 img001 | |
| List of components and their corresponding List of Parts (LOP) and drawing numbers. | 29th Sep 1932 | Box 169 \ 4 img002 | |
| Specifications for Front Shock Dampers to LOP F.57908. | 29th Sep 1932 | Box 169 \ 4 img003 | |
| Specification revision for the Peregrine II Bumper Chassis, detailing changes to springs, dampers, and pedals. | 29th Sep 1932 | Box 169 \ 4 img004 | |
| Failure and subsequent modifications to the pedal shaft and crankcase connection for the Peregrine Bumper chassis. | 7th Oct 1932 | Box 169 \ 4 img005 | |
| Specification revision for the Peregrine II - Bumper Chassis. | 20th Dec 1932 | Box 169 \ 4 img006 | |
| Specifications for front and rear axle shock dampers and their components. | 20th Dec 1932 | Box 169 \ 4 img007 | |
| Specification updates for the Peregrine II Bumper Chassis. | 22th Dec 1932 | Box 169 \ 4 img008 | |
| List of parts required for the Peregrine bumper chassis. | 16th Jan 1933 | Box 169 \ 4 img009 | |
| Request to dismantle and examine the special lightened road springs on a Peregrine Bumper chassis after testing. | 7th Jun 1933 | Box 169 \ 4 img010 | |
| Booming issue with the Peregrine exhaust system and proposed modifications. | 11th Jul 1932 | Box 169 \ 4 img011 | |
| List of required adjustments and repairs for the 'Peregrine' vehicle. | 11th Jul 1932 | Box 169 \ 4 img012 | |
| Complete specification for the first Peregrine II chassis. | 16th Jul 1932 | Box 169 \ 4 img013 | |
| List of scheme and part numbers for frames, fittings, and associated components. | 15th Jul 1932 | Box 169 \ 4 img014 | |
| Specifications for front and rear springs, fittings, wings, and aprons. | 16th Jul 1932 | Box 169 \ 4 img015 | |
| List of parts and assemblies with corresponding part numbers and scheme references. | 16th Jul 1932 | Box 169 \ 4 img016 | |
| List of parts and assemblies including shock dampers, horn, fan, exhaust, and radiator. | 16th Jul 1932 | Box 169 \ 4 img017 | |
| List of vehicle components and their associated part and scheme numbers. | 16th Jul 1932 | Box 169 \ 4 img018 | |
| List of parts and schemes for brake systems, equalisers, axles, and wheels. | 16th Jul 1932 | Box 169 \ 4 img019 | |
| List of parts for the Cross Steering Tube and Rear Axle assemblies. | 16th Jul 1932 | Box 169 \ 4 img020 | |
| Request concerning the 'Peregrine' to increase the front pivot lean to 4 degrees and to fit a pre-prepared plate. | 29th Jul 1932 | Box 169 \ 4 img021 | |
| Requesting to fit a fan pulley on the slipper wheel of a Peregrine chassis. | 18th Aug 1932 | Box 169 \ 4 img022 | |
| Drawing of a Peregrine II fan pulley with an integral damper. | 22th Aug 1932 | Box 169 \ 4 img023 | |
| Confirming the manufacture of a shortened propeller shaft for Peregrine and discussing test bed arrangements. | 22th Aug 1932 | Box 169 \ 4 img024 | |
| Confirming a list of modifications and checks for a car named PEREGRINE. | 22th Sep 1932 | Box 169 \ 4 img025 | |
| Specification revision for the Peregrine II, No. 2 Unit chassis, detailing changes to the fan, petrol piping, and front axle. | 28th Aug 1932 | Box 169 \ 4 img026 | |
| Specification revision for Chassis 1 Peregrine II Engine Unit, detailing changes to the propeller shaft and steering column. | 2nd Sep 1932 | Box 169 \ 4 img027 | |
| Modifications to the change gear and brake mechanism to cure rattles. | 22th Sep 1932 | Box 169 \ 4 img028 | |
| Requesting that W. Bell be given four Peregrine dampers to reduce loads. | 27th Sep 1932 | Box 169 \ 4 img029 | |
| Specification revision for a Peregrine II Chassis, detailing changes to the front shock dampers. | 30th Sep 1932 | Box 169 \ 4 img030 | |
| Request to manufacture a pair of shorter front brake cables with specific measurements for Peregrine Brakes. | 7th Oct 1932 | Box 169 \ 4 img031 | |
| List of alterations to a vehicle's specification carried out in the experimental garage, concerning brakes and the rear apron. | 31th Oct 1932 | Box 169 \ 4 img032 | |
| Request for a silencer extension for the Peregrine exhaust system. | 8th Nov 1932 | Box 169 \ 4 img033 | |
| Request to manufacture a Spiral silencer unit. | 9th Mar 1933 | Box 169 \ 4 img034 | |
| Revised specification for the Peregrine II Chassis, No.1 Unit, which has passed testing. | 21th Mar 1933 | Box 169 \ 4 img035 | |
| Specification revision for the Peregrine II Chassis No. 1 unit, detailing rear shock damper brackets. | 21th Mar 1933 | Box 169 \ 4 img036 | |
| Requesting to fit the latest shock dampers on the PEREGRINE I car. | 7th Jun 1933 | Box 169 \ 4 img037 | |
| Specification sheet for the Peregrine II, No.2 Chassis, Engine Unit, and Gear Box Unit. | 18th Oct 1932 | Box 169 \ 4 img038 | |
| Specification sheet for torque re-action dampers, front and rear road springs, and fittings. | 18th Oct 1932 | Box 169 \ 4 img039 | |
| List of components and part numbers for various vehicle sections, including apron, steering, petrol tank, and pedals. | 18th Oct 1932 | Box 169 \ 4 img040 | |
| List of parts document detailing components such as dashbrackets, pumps, dampers, and horns. | 18th Oct 1932 | Box 169 \ 4 img041 | |
| List of specifications for vehicle components including the Fan, Exhaust, Radiator, Bonnet, and Side Spare Wheel Carrier. | 18th Oct 1932 | Box 169 \ 4 img042 | |
| List of parts and assemblies for brake, propeller shaft, and transmission systems. | 18th Oct 1932 | Box 169 \ 4 img043 | |
| Specification sheet detailing parts for the rear axle, rear brakes, rear hub, and cross steering tube. | 18th Oct 1932 | Box 169 \ 4 img044 | |
| List of parts and modifications for the front axle, brakes, and steering assembly. | 18th Oct 1932 | Box 169 \ 4 img045 | |
| Complete specification of the electrical equipment fitted to the Peregrine II, No.3 Unit. | 18th Oct 1932 | Box 169 \ 4 img046 | |
| List of electrical component specifications including switches, boxes, boards and fittings. | 18th Oct 1932 | Box 169 \ 4 img047 | |
| List of parts for frame wiring, headlamps, and the instrument board with associated List of Parts (LOP) numbers. | 18th Oct 1932 | Box 169 \ 4 img048 | |
| Request to fit the 2nd Peregrine chassis (blue saloon) with rod controls for the shock absorbers. | 24th Oct 1932 | Box 169 \ 4 img049 | |
| Request to fit a replacement Peregrine propeller shaft while the original is away for balancing. | 26th Oct 1932 | Box 169 \ 4 img050 | |
| Modifications to the Peregrine front engine mounting. | 26th Oct 1932 | Box 169 \ 4 img051 | |
| Blueprint of a new radiator bracket with a .500 inch offset. | 26th Oct 1932 | Box 169 \ 4 img052 | |
| Blueprint of a mechanical assembly for the Peregrine engine, showing part numbers, rivets, and clearance specifications. | 25th Oct 1937 | Box 169 \ 4 img053 | |
| Drawing of a front engine mounting. | 25th Oct 1937 | Box 169 \ 4 img054 | |
| List of modifications for a 2 Phantom II car destined for France. | 27th Oct 1932 | Box 169 \ 4 img055 | |
| List of technical modifications and specifications for the clutch and chassis components. | 27th Oct 1932 | Box 169 \ 4 img056 | |
| Continued list of vehicle components including a wider rear brake drum, a petrol pump, and a balanced propeller shaft. | 27th Oct 1932 | Box 169 \ 4 img057 | |
| Alteration to the specification regarding the replacement of front brake equaliser levers and a required modification to the undershield. | 31th Oct 1932 | Box 169 \ 4 img058 | |
| Changes to the braking specification for the Peregrine model for France. | 2nd Nov 1932 | Box 169 \ 4 img059 | |
| Request to make three levers for Peregrine brakes for a Per.ll chassis. | 3rd Nov 1932 | Box 169 \ 4 img060 | |
| Blueprint drawing for an Operating Lever (Direct) with dimensions. | 21th Sep 1932 | Box 169 \ 4 img061 | |
| Blueprint of a forging for a mechanical part, with dimensions and a cross-section view. | 1st Jul 1932 | Box 169 \ 4 img062 | |
| Specification note about a chassis radiator cap fitted without a valve, where a rubber washer is replaced by a soft copper washer. | 4th Nov 1932 | Box 169 \ 4 img063 | |
| Specification document for the Peregrine II chassis, engine, and gearbox for 10,000-mile trials. | 7th Nov 1932 | Box 169 \ 4 img064 | |
| Specifications for frames, fittings, front and rear road springs. | 7th Nov 1932 | Box 169 \ 4 img065 | |
| List of vehicle components and sub-assemblies with associated part and reference numbers. | 7th Nov 1932 | Box 169 \ 4 img066 | |
| List of parts specifications including petrol tank, pedals, dashboard, oil pump, and rear shock dampers. | 7th Nov 1932 | Box 169 \ 4 img067 | |
| Specification sheet detailing components for front axle, horn, fan, and exhaust systems. | 7th Nov 1932 | Box 169 \ 4 img068 | |
| List of parts and modifications for various vehicle components including the radiator, bonnet, and starting handle. | 7th Nov 1932 | Box 169 \ 4 img069 | |
| Parts list for rear and front brake equalisers, rear brake intermediate shaft, and propeller shaft. | 7th Nov 1932 | Box 169 \ 4 img070 | |
| List of parts and modifications for the transmission shaft, rear axle, and rear brakes. | 7th Nov 1932 | Box 169 \ 4 img071 | |
| List of parts and schemes for rear hubs, steering, front axle, brakes, and undersheet. | 7th Nov 1932 | Box 169 \ 4 img072 | |
| Revised specification of the electrical equipment for the Peregrine II chassis after 10,000 miles trials. | 10th Nov 1932 | Box 169 \ 4 img073 | |
| List of electrical components with their part numbers and specifications. | 10th Nov 1932 | Box 169 \ 4 img074 | |
| | | | |
