Rolls-Royce Archives
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Rolls-Royce Experimental Archives                
Choose Archive


Browsing Records        Page 2296 of 2367        Sort by   Box   Date   Description

Filter      from        to             identifier   [all]
DescriptionDateIdentifier
Comparative performance graphs of P&RTBD7 and Exide 6XL3-4 batteries, plotting Volts against Amperes.23th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan248
Comparison of performance curves (Volts vs. Amperes) for two different standard 40-50 HP batteries.26th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan249
Experiments on induction pipe heating for Phantom engines, comparing hot spot and pre-heated air systems.26th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan251
Report page detailing tests comparing standard hot spot and preheated intake air systems on engine performance.26th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan252
Report page with a graph and analysis of torque variation against intake air temperature with no heat applied to the 'hot spot'.26th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan253
Graph and analysis comparing the influence of mixture strength on Mean Effective Pressure for different engine heating methods.26th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan254
Analysis of engine performance tests comparing the effects of high intake air temperature on power and economy.26th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan255
The effects of a 'hot-spot' heating system on engine performance, economy, and detonation.26th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan257
Analysis of the effects of hot air intake on engine performance, power, and detonation.28th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan258
Testing self-ignition and backward running in Phantom engines, specifically regarding the danger of firing the carburetter.28th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan259
Observations on engine back-fire, carburetter performance, and exhaust valve cooling tests.28th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan260
Testing hydraulic shock dampers in France with different oils and adjusting their settings to counter vehicle wobble.28th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan261
Observations on the operation of 20 HP and 40/50 HP standard dynamos working without a connected battery.8th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan262
Test results of the electrical system's voltage, conductance, and ampere output for 20 HP and 40/50 HP models.28th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan263
Continued page of a report discussing risks and performance of an electrical system at higher speeds.28th Jun 1926West Wittering \ O \ 2April1926-June1926  Scan264
The examination of a Mechanic's Joint after 1623 miles of testing.1st Jan 1926West Wittering \ O \ 2January1926-March1926  Scan1
Experimental magnetos for the new Phantom chassis from suppliers Lucas and Simms.5th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan2
Report discussing the construction and performance of Lucas and Simms magnetos.5th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan3
Page discussing machine lightening by replacing bronze castings with aluminium.5th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan4
Preliminary report on the Lucas Type KMAG Magneto No. 1125, detailing its main features and construction.14th Dec 1925West Wittering \ O \ 2January1926-March1926  Scan5
Preliminary report on the examination and construction of a Ruths Magnetos Type RH11.4th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan6
Modifying spare wheel carriers to fix a breaking bolt.1st Jan 1926West Wittering \ O \ 2January1926-March1926  Scan7
Modifications to the battery ignition system.8th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan8
The frame failure of the 8-EX experimental car after 11,500 miles and a list of new parts to be fitted.14th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan9
List of improvements and tasks for a car, including a frame replacement for the 8-EX car.12th Feb 1925West Wittering \ O \ 2January1926-March1926  Scan10
New features on a 20 HP car being sent to France for a 10,000-mile test.15th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan11
Technical memorandum discussing the springing, deflection, and stiffness of springs for various car models.22th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan12
Customer complaints regarding the springing and ride comfort of the 40/50 HP model.2nd Feb 1926West Wittering \ O \ 2January1926-March1926  Scan13
Frame flexibility, passenger discomfort, and the challenges of measuring springing movement.1st Mar 1926West Wittering \ O \ 2January1926-March1926  Scan14
Page expressing an opinion on car springing, comparing it unfavourably with that of the Lancia Lambda.6th Mar 1926West Wittering \ O \ 2January1926-March1926  Scan15
Comparison of springing, weight, and allowance peculiarities between the 20 HP and 40/50 HP models.22th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan16
Spare wheel weight distribution, spring strengthening for export models, and a table of spare wheel weights.10th Mar 1926West Wittering \ O \ 2January1926-March1926  Scan17
Spring load calculation schedule for a Phantom car for running in France.17th Mar 1926West Wittering \ O \ 2January1926-March1926  Scan18
Comparison of rear spring deflection and buffer clearance between the 20 HP and 40/50 HP cars.22th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan19
Specification sheet comparing springing loads and alterations for the New Phantom and 20 HP models.25th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan20
The difficulties of accessing and maintaining the oil relief valve on the Phantom model.27th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan21
Proposal to use stainless steel for valves and seats to prevent oil pressure failure from foreign matter.27th Nov 1926West Wittering \ O \ 2January1926-March1926  Scan22
Recurring failures and distortion issues with exhaust pipes on the Phantom model during testing.27th Nov 1926West Wittering \ O \ 2January1926-March1926  Scan23
Exhaust box lug failure and the unreliability of sliding joints on exhaust pipes.27th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan24
Blueprint of Phantom exhaust pipes detailing areas of cracking and breakage.27th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan25
The performance of Lucas and Simms magnetos for the New Phantom.27th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan26
Magneto performance, comparing different models and suggesting design improvements.27th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan27
Comparison of Watford, Lucas, and Simms magneto systems regarding performance, noise, weight, and operation.27th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan28
Testing Simms and Lucas magnetos for contact breaker noise.27th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan29
The breaking of the Off-Side (O.S.) chassis frame on an S-EX car.27th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan30
Sketch showing a fracture in an off-side frame member sustained during road tests in France.25th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan31
Cover memo for a report on Sunbeam racing engines and superchargers, noting a former Sunbeam employee is now assisting with aero engine testing.28th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan32
Particulars of the 2-Litre Racing Sunbeam engine and its components.28th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan33
Specification sheet detailing the design of reciprocating parts and valve gear.28th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan34
Page 3 of a report detailing engine specifications for camshafts, ignition, and lubrication systems.28th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan35
Description of the engine's cooling and supercharging systems, including details on pumps, vanes, and relief valves.28th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan36
Report page detailing engine component troubles and testing procedures for blowers.28th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan37
Engine troubles during testing, covering piston failure, valve gear breakages, and spark plug fouling.28th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan38
Analysis of engine performance issues related to poor fuel atomisation and distribution at low speeds without supercharging.5th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan39
Fuel test results for a Two-litre Sunbeam engine, detailing a specific alcohol-benzol-ether mixture and its properties.27th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan40
Performance comparison graph for a 2-litre, 6-cylinder Sunbeam G.P. racer engine, showing B.M.E.P. and Horse-Power curves with and without supercharging.27th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan41
Sketches of a connecting rod bearing and a supercharger system layout.28th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan43
Valve lift diagrams for a three-litre Sunbeam engine.28th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan44
The testing of Elliott ammeters against Weston instruments.1st Feb 1926West Wittering \ O \ 2January1926-March1926  Scan45
The testing of ammeters from Messrs. Elliott, noting a previous test failure and the decision for further testing.1st Feb 1926West Wittering \ O \ 2January1926-March1926  Scan46
Test report on the performance and mileage of several Elliott ammeters.29th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan47
First flight report for a Fairey 3D Seaplane with an Eagle-15 engine fitted with a 2-speed gear.2nd Feb 1926West Wittering \ O \ 2January1926-March1926  Scan48
Difficulties with trapped air when filling piston-type hydraulic shock absorbers with oil.2nd Feb 1926West Wittering \ O \ 2January1926-March1926  Scan49
Road trial of a Cadillac car to investigate steering wobbles.2nd Feb 1926West Wittering \ O \ 2January1926-March1926  Scan50
Road trial report for an 8-cylinder Cadillac car, detailing its specifications and performance.1st Feb 1926West Wittering \ O \ 2January1926-March1926  Scan51
Report page detailing observations on a vehicle's suspension, steering, and handling characteristics.1st Feb 1926West Wittering \ O \ 2January1926-March1926  Scan52
Car's performance, focusing on balloon tyre wobble, wheel shimmy, and brief evaluations of the engine, clutch, and gearbox.1st Feb 1926West Wittering \ O \ 2January1926-March1926  Scan53
Vehicle performance test report continuation, detailing brake, suspension, and general performance characteristics.2nd Feb 1926West Wittering \ O \ 2January1926-March1926  Scan54
20 HP chassis test, detailing steering and pedal modifications and future plans for testing in France.2nd Feb 1926West Wittering \ O \ 2January1926-March1926  Scan55
Tests to prevent mud from getting onto front brakes.3rd Feb 1926West Wittering \ O \ 2January1926-March1926  Scan56
Investigation into mud and water penetration of the Goshawk III front brake mechanism.1st Feb 1926West Wittering \ O \ 2January1926-March1926  Scan57
Report page analyzing mud ingress into a brake drum system and testing different dust cover designs.1st Feb 1926West Wittering \ O \ 2January1926-March1926  Scan58
Brake drum cover designs and tests to prevent mud and water ingress, including blueprint diagrams.4th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan59
Modifications to brake dust covers to prevent mud and water penetration, recommending a new design and the use of solid rivets.4th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan60
Diagram showing the particulars of a successful dust cover design with measurements and assembly instructions.4th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan61
The progress of testing tungsten ignition points.4th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan62
10,000-mile bench test of a distributor with stainless steel sparking points.4th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan63
Comparative cooling efficiency tests of new type louvred bonnets against standard shutters on a Phantom car.4th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan64
Experimental testing of ignition coils with finer primary windings.6th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan65
Preliminary tests of hydraulic shock absorbers, investigating a chattering issue caused by trapped air.1st Feb 1926West Wittering \ O \ 2January1926-March1926  Scan66
Shock absorber design fault causing air re-entry and system chatter.2nd Feb 1926West Wittering \ O \ 2January1926-March1926  Scan67
Step iron and front mud-guard stay failures on 20 HP and 40/50 HP models tested in France.2nd Feb 1926West Wittering \ O \ 2January1926-March1926  Scan68
The condition of an 8-EX Barker Limousine body mounted on a subframe after a 14,000-mile test in France.1st Feb 1926West Wittering \ O \ 2January1926-March1926  Scan69
Various faults and required modifications on a vehicle, including the battery box, windscreen wiper, and valances.1st Feb 1926West Wittering \ O \ 2January1926-March1926  Scan70
Visit to Derby and the readiness of cars EAC.7, EAC.8, and a 20 HP model.1st Feb 1926West Wittering \ O \ 2January1926-March1926  Scan71
Tests of hydraulic shock absorbers to eliminate high-speed steering wobbles.9th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan72
Tests on hydraulic dampers and tyres to eliminate vehicle wobbles.1st Feb 1926West Wittering \ O \ 2January1926-March1926  Scan73
The causes and testing of high-speed steering wobbles, or 'shimmy'.1st Feb 1926West Wittering \ O \ 2January1926-March1926  Scan74
Continued memo discussing vehicle 'shimmy' or 'wobble' issues related to tyre alterations.11th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan75
The standardization and inspection of a rigid fixed contact point for a cutout.11th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan76
The failure of rear road springs on the 8-EX car during a mileage test.1st Feb 1926West Wittering \ O \ 2January1926-March1926  Scan77
The distortion of the Goshawk brakes sheet metal carrier bracket due to grease gun application.2nd Feb 1926West Wittering \ O \ 2January1926-March1926  Scan78
Proposed alteration to brake shaft bearing cap G.50755 to improve lubrication and prevent seizing.8th Jan 1926West Wittering \ O \ 2January1926-March1926  Scan79
Recommendation to adopt a modification for a brake shaft bracket to prevent distortion and assist oil flow.12th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan80
Superheated water hot spot system for a Phantom engine.12th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan81
Explanation of temperature variations in engine induction pipes and the effect on fuel evaporation.12th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan82
Report page discussing tests on engine heating systems, including a data table showing the influence of water velocity on heat transfer.12th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan83
Experiments investigating a proposed superheated system and its effects on engine cooling, specifically the rate of heating from cold.12th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan84
Graph and analysis of a Superheat Hot Spot system's temperature increase over time with varying water flow rates.12th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan85
Report page with a graph comparing the increase of induction pipe temperatures for superheated, standard exhaust heated, and water-heated systems.12th Feb 1926West Wittering \ O \ 2January1926-March1926  Scan86


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙