| Description | Date | Identifier | |
| Clutch failures on car 32-EX and new steering fitted to car GLG-5. | 11th Jun 1936 | Box 91 \ 3 scan0011 | |
| Failure of a 32-EX gearbox after 5,000 miles and the subsequent inspection findings. | 11th Jun 1936 | Box 91 \ 3 scan0012 | |
| The condition and rework of a cone, including bedding analysis, spline trimming, and lapping. | 12th Jun 1936 | Box 91 \ 3 scan0013 | |
| Brake drum balance, clutch plate replacement, and trunnion operating shaft issues. | 12th Jun 1936 | Box 91 \ 3 scan0014 | |
| Typed telegram to Hancock in France regarding Phantom Three axle production parts. | 20th May 1936 | Box 91 \ 3 scan0015 | |
| Specifying parts for the 32-EX Front Suspension for a car destined for France. | 26th Feb 1936 | Box 91 \ 3 scan0016 | |
| Travel information sheet for the Sierra Nevada region in Spain, detailing transport, accommodation, and prices. | 26th Feb 1936 | Box 91 \ 3 scan0017 | |
| Information sheet detailing accommodation, travel, and practical advice for visiting the Sierra Nevada. | 22th Jan 1936 | Box 91 \ 3 scan0018 | |
| Travel guide detailing itineraries, times, and prices for excursions in the Sierra Nevada, Spain. | 22th Jan 1936 | Box 91 \ 3 scan0019 | |
| Instruction to reline the hand brake shoes on car 32-EX with Ferodo Fibrre A.D. | 21th Mar 1936 | Box 91 \ 3 scan0020 | |
| Telegram to Francobrit in Paris regarding Phantom Three axle production parts. | 20th May 1936 | Box 91 \ 3 scan0021 | |
| Telegram received by telephone regarding an examination of a 32FX axle and travel arrangements. | 20th May 1936 | Box 91 \ 3 scan0022 | |
| Road test report for car 32-EX in France, detailing a metallic rattle and suspension issues. | 26th May 1936 | Box 91 \ 3 scan0023 | |
| List of maintenance tasks performed in a garage, followed by a brief travel itinerary. | 26th May 1936 | Box 91 \ 3 scan0024 | |
| Hand-drawn sketch of a rear buffer. | 28th May 1936 | Box 91 \ 3 scan0025 | |
| Letter to The Royal Automobile Club regarding Spanish Customs Authorities. | 28th May 1936 | Box 91 \ 3 scan0026 | |
| Diagram of a 25-30 HP float chamber. | 1st Jul 1938 | Box 91 \ 3 scan0027 | |
| Blueprint diagram of a Phantom III float chamber showing modifications to the vent and partition. | 1st Jul 1938 | Box 91 \ 3 scan0028 | |
| Tests carried out on the boiling of petrol in pipes and pumps due to hot weather conditions. | 23th Jun 1936 | Box 91 \ 3 scan0029 | |
| Resolution of petrol pump overheating and fuel vaporization by relocating the pumps, including test results. | 23th Jun 1936 | Box 91 \ 3 scan0030 | |
| Under bonnet temperature and the testing of petrol pumps and a higher speed fan. | 23th Jun 1936 | Box 91 \ 3 scan0031 | |
| Schematic showing possible mounting positions for the Phantom III pumps on the dash. | 17th Jan 1938 | Box 91 \ 3 scan0032 | |
| Cover sheet for a report on the condition of a Phantom III, 32-EX, after a 10,000-mile test in France. | 14th Aug 1936 | Box 91 \ 3 scan0033 | |
| The condition of a Phantom III, 32-EX, after a 10,000-mile test in France and a subsequent accident. | 14th Aug 1936 | Box 91 \ 3 scan0034 | |
| Component inspection report detailing damage and condition after a potential accident. | 14th Aug 1936 | Box 91 \ 3 scan0035 | |
| Inspection report detailing the condition of various axle, brake, and hub components. | 3rd Aug 1936 | Box 91 \ 3 scan0036 | |
| Inspection report on front hubs, steering, and suspension components, including spring test results after 10,000 miles. | 3rd Aug 1936 | Box 91 \ 3 scan0037 | |
| Vehicle inspection report detailing damage to various components like the frame, springs, and petrol tank. | 3rd Aug 1936 | Box 91 \ 3 scan0038 | |
| Vehicle condition report noting damage from road conditions, particularly sandblasting, to various components. | 3rd Aug 1936 | Box 91 \ 3 scan0039 | |
| Inspection report detailing the condition of various components for Engine Unit Ph.III.No.9. | 3rd Aug 1936 | Box 91 \ 3 scan0040 | |
| Inspection report detailing the condition and wear of various engine components. | 3rd Aug 1936 | Box 91 \ 3 scan0041 | |
| Condition report detailing the status of various vehicle components and electrical equipment. | 3rd Aug 1936 | Box 91 \ 3 scan0042 | |
| Condition report on vehicle electrical and fuel system components including the dynamo, regulator, ignition, wiring, and petrol pump. | 6th Aug 1936 | Box 91 \ 3 scan0043 | |
| Diagrams showing cracked pistons from a Phantom III after a 10,000 miles test in France. | 6th Aug 1936 | Box 91 \ 3 scan0044 | |
| Sketches showing the condition of Phantom III connecting-rod big-end bearings after a 10,000 miles road test. | 5th Aug 1936 | Box 91 \ 3 scan0045 | |
| Sketches showing the condition of the main bearings for Phantom III Unit No. 9 after a 10,000-mile road test. | 5th Aug 1936 | Box 91 \ 3 scan0046 | |
| Crankshaft bearing clearances for a Phantom III Unit Nº3, with wear measurements taken before and after a 10,000-mile road test. | 5th Aug 1936 | Box 91 \ 3 scan0047 | |
| Liner bore dimension measurements for a Phantom III engine, new and after a 10,000-mile road test. | 5th Aug 1936 | Box 91 \ 3 scan0048 | |
| Measurement data for Phantom III Unit 9 piston profiles, new and after a 10,000-mile road test. | 5th Aug 1936 | Box 91 \ 3 scan0049 | |
| Blueprint detailing the design and suggestions for rubber pads on rear springs. | 11th Aug 1936 | Box 91 \ 3 scan0050 | |
| Diagram illustrating an incorrectly assembled near side top pivot bearing of a yoke. | 11th Aug 1936 | Box 91 \ 3 scan0051 | |
| Blueprint showing a diagram of a lower pivot on a yoke for a front axle. | 11th Aug 1936 | Box 91 \ 3 scan0052 | |
| Blueprint illustrating an issue with a replenishing valve plug on a front suspension shock damper and the correct position for a lock wire. | 14th Aug 1936 | Box 91 \ 3 scan0053 | |
| Faults and adjustments made to the front brakes. | 19th Oct 1936 | Box 91 \ 3 scan0054 | |
| Suspension specification for the Spectre II model for France. | 3rd Jul 1935 | Box 91 \ 3 scan0055 | |
| Specification for the Spectre Unit for 2-S-1 Chassis for France, detailing modifications. | 4th Jul 1935 | Box 91 \ 3 scan0056 | |
| List of specifications and modifications for various engine components, including connecting rods, governor springs, and carburetors. | 4th Jul 1935 | Box 91 \ 3 scan0057 | |
| Instruction memo for the manufacture and fitting of new parts for the Spectre II car. | 5th Jul 1935 | Box 91 \ 3 scan0058 | |
| Proposing a revised road test route for the 'Spectre' car over various Alpine passes. | 24th Jul 1935 | Box 91 \ 3 scan0059 | |
| Radiator and crankcase pressure test results for a 3. S. I. Spectre. | 30th Jul 1935 | Box 91 \ 3 scan0060 | |
| With a hand-drawn sketch reporting a broken silent rocker and its replacement with standard rockers. | 31th Jul 1934 | Box 91 \ 3 scan0061 | |
| List of specifications and modifications for the 'Spectre 2 for France' car. | 1st Aug 1935 | Box 91 \ 3 scan0062 | |
| Continued list of engine component modifications and notes on part supply. | 1st Aug 1935 | Box 91 \ 3 scan0063 | |
| Covering note for the provisional specification of the Spectre No. 7 unit. | 2nd Aug 1935 | Box 91 \ 3 scan0064 | |
| List of modifications to the specification for the Spectre 7 unit. | 2nd Aug 1935 | Box 91 \ 3 scan0065 | |
| Letter detailing work schedules, personnel holidays, and engine modifications for test vehicles in France. | 7th Aug 1935 | Box 91 \ 3 scan0066 | |
| List of 15 modifications and specifications for a chassis. | 7th Aug 1935 | Box 91 \ 3 scan0067 | |
| List of engine component specifications and modifications. | 7th Aug 1935 | Box 91 \ 3 scan0068 | |
| Requesting to fit a modified camshaft and a detachable exhaust system to car unit 1-S-1. | 8th Aug 1935 | Box 91 \ 3 scan0069 | |
| Specification of electrical equipment for Spectre 2.S.1. | 8th Aug 1935 | Box 91 \ 3 scan0070 | |
| Requesting modifications to the Spectre unit specification, regarding tappets and push rods. | 9th Aug 1935 | Box 91 \ 3 scan0071 | |
| Listing modifications for the Spectre 2-S-I car before its 10,000-mile test. | 9th Aug 1935 | Box 91 \ 3 scan0072 | |
| Requesting the replacement of potentially failing rivets with bolts on a Spectre II servo's balancer lever for safety reasons. | 12th Aug 1935 | Box 91 \ 3 scan0073 | |
| List of modifications for the Spectre II gearbox following a 10,000-mile test. | 12th Aug 1935 | Box 91 \ 3 scan0074 | |
| Results of a 10,000-mile test on two experimental Spectre steering cams. | 13th Aug 1935 | Box 91 \ 3 scan0075 | |
| Changes to the Spectre II chassis lubrication valves to align with the Spectre III. | 16th Aug 1935 | Box 91 \ 3 scan0076 | |
| Brake layout modifications for the 2-S-I test in France, applicable to Spectre and Olympia cars. | 16th Aug 1935 | Box 91 \ 3 scan0077 | |
| Build specifications and parts readiness for the 2-S-1 chassis 18,000 miles test. | 17th Aug 1935 | Box 91 \ 3 scan0078 | |
| Modifications to be incorporated into the Spectre II Gearbox. | 17th Aug 1935 | Box 91 \ 3 scan0079 | |
| Brake layout modification for model 2-S-I for France. | 17th Aug 1935 | Box 91 \ 3 scan0080 | |
| Listing ten required modifications for a Spectre II car destined for France. | 20th Aug 1935 | Box 91 \ 3 scan0081 | |
| List of chief specification items for the 2-S-I model for a 10,000-mile test in France. | 20th Aug 1935 | Box 91 \ 3 scan0082 | |
| List of five miscellaneous technical points or modifications. | 20th Aug 1935 | Box 91 \ 3 scan0083 | |
| Instructing to incorporate a scheme to prevent oil from leaking into the clutch pit. | 21th Aug 1935 | Box 91 \ 3 scan0084 | |
| Three modifications for the Spectre II chassis destined for France. | 21th Aug 1935 | Box 91 \ 3 scan0085 | |
| Request to incorporate a modified bolt head stop on the radiator for chassis 2-S-I for France. | 22th Aug 1935 | Box 91 \ 3 scan0086 | |
| Request to obtain a replacement dashboard cigarette lighter for Chassis 2-S-I. | 23th Aug 1935 | Box 91 \ 3 scan0087 | |
| Requesting a modification to the Spectre II Gearbox drain hole. | 26th Aug 1935 | Box 91 \ 3 scan0088 | |
| Modifications to the Spectre II gearbox front cover and 2nd motion shaft. | 28th Aug 1935 | Box 91 \ 3 scan0089 | |
| Instruction memo to fit the gearbox front suspension of a Spectre II for France to Hs.2094. | 28th Aug 1935 | Box 91 \ 3 scan0090 | |
| Inspection and modification report for Spectre No. 10 following a 10,000-mile unit test. | 2nd Sep 1935 | Box 91 \ 3 scan0091 | |
| Engine test findings, including leaks, noisy components, and recommended modifications. | 2nd Sep 1935 | Box 91 \ 3 scan0092 | |
| Modifications to the servo on a Spectre II to prevent fouling. | 4th Sep 1935 | Box 91 \ 3 scan0093 | |
| Modifications to Dunlop wire wheels, including drilling and fitting a new boss. | 6th Sep 1935 | Box 91 \ 3 scan0094 | |
| Request to fit a 7.00' diameter air silencer to the Spectre II (31-EX) chassis, replacing the existing 6.00' unit. | 13th Sep 1935 | Box 91 \ 3 scan0095 | |
| List of engine and chassis modifications for Spectre Chassis 2-S-I before its delivery to France. | 16th Sep 1935 | Box 91 \ 3 scan0096 | |
| List of required modifications and adjustments for a vehicle, continued on page 2. | 16th Sep 1935 | Box 91 \ 3 scan0097 | |
| Specification memo detailing modifications for the Spectre II car's exhaust silencer. | 16th Sep 1935 | Box 91 \ 3 scan0098 | |
| The removal of unsuitable D.W.S. Jacks and the fitting of Jack Pads to a chassis. | 17th Sep 1935 | Box 91 \ 3 scan0099 | |
| Instruction to machine a spiral groove on the front shock damper piston for a 'Spectre II for France' to increase lubrication. | 17th Sep 1935 | Box 91 \ 3 scan0100 | |
| Suitability and modification of a diaphragm for the Spectre II radiator pressure release valve. | 18th Sep 1935 | Box 91 \ 3 scan0101 | |
| Testing and replication of an American flexible bladed fan for the Spectre II model for France. | 19th Sep 1935 | Box 91 \ 3 scan0102 | |
| Request to fit and test a new carburetter float chamber vent scheme on a Spectre II car in France. | 19th Sep 1935 | Box 91 \ 3 scan0103 | |
| Scheme for the 'Spectre 2-S-I' petrol filter to prevent fuel syphoning. | 19th Sep 1935 | Box 91 \ 3 scan0104 | |
| Instructions for fitting a petrol filter on a Spectre 2-S-I model for a 10,000-mile test run. | 19th Sep 1935 | Box 91 \ 3 scan0105 | |
| Request to check the steering lock of a Spectre II car when it comes out of the shop. | 20th Sep 1935 | Box 91 \ 3 scan0106 | |
| Requesting the preparation of stellited exhaust valves for the 20/25 HP and Spectre models. | 23th Sep 1935 | Box 91 \ 3 scan0107 | |
| Temporary modification to the Spectre Front Jacking Pads to increase the contact area. | 23th Sep 1935 | Box 91 \ 3 scan0108 | |
| Faults and observations on various vehicle components. | 24th Sep 1935 | Box 91 \ 3 scan0109 | |
| Specification and modifications for the Spectre Exhaust Silencer system. | 25th Sep 1935 | Box 91 \ 3 scan0110 | |
| | | | |