Rolls-Royce Archives
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Rolls-Royce Experimental Archives                
Choose Archive


Browsing Records        Page 1153 of 2367        Sort by   Box   Date   Description

Filter      from        to             identifier   [all]
DescriptionDateIdentifier
15,000-mile test of the Phantom III test car, 32-EX, and its subsequent stripping for examination.10th Sep 1937Box 91 \ 2  scan0342
The examination of the 32-EX Phantom III test car after a 15,000-mile test.10th Sep 1937Box 91 \ 2  scan0343
Typed list of modifications and part updates with corresponding reference numbers.10th Sep 1937Box 91 \ 2  scan0344
List of modifications and notes on various vehicle components with associated mileage records.10th Sep 1937Box 91 \ 2  scan0345
Instructions for fitting a new crankshaft and modifying a flywheel for Unit 13.26th Oct 1937Box 91 \ 2  scan0346
Sketches showing alterations to two separate parts with updated dimensions.26th Oct 1937Box 91 \ 2  scan0347
15,000-mile test report for the Phantom III, chassis 32-EX.18th Sep 1937Box 91 \ 2  scan0348
Leading experimental features, specifically adjustable tappets and four-port cylinder heads.18th Sep 1937Box 91 \ 2  scan0349
Tappet settings, valve springs, and a flywheel and clutch modification scheme.18th Sep 1937Box 91 \ 2  scan0350
Clutch modifications and performance, including changes to bearings, cushioning, and housing.18th Sep 1937Box 91 \ 2  scan0351
The application of a servo spring to the clutch and the advantages of an overdrive gearbox.15th Sep 1937Box 91 \ 2  scan0352
Notes on engine stalling, gear lever vibration, oil leaks, and testing of high-pressure petrol pump configurations.18th Sep 1937Box 91 \ 2  scan0353
Tests for petrol systems, threaded shackles for rear road springs, and Ferodo brake linings on Chromidium drums.18th Sep 1937Box 91 \ 2  scan0354
Scheme for reducing rear braking on the Phantom III, improving the front to rear proportion.18th Sep 1937Box 91 \ 2  scan0355
Issues with standardised parts and the corresponding actions or status updates.18th Sep 1937Box 91 \ 2  scan0356
Various component failures and their corresponding proposed solutions or explanations.18th May 1937Box 91 \ 2  scan0357
List of vehicle faults recorded at specific mileage and the corresponding actions or modifications to be taken.18th Sep 1937Box 91 \ 2  scan0358
List of special features and their corresponding test results.18th Sep 1937Box 91 \ 2  scan0359
Test results and standardization status of various automotive parts.18th Sep 1937Box 91 \ 2  scan0360
Test report detailing the results and actions for various vehicle components.18th Sep 1937Box 91 \ 2  scan0361
Test results report for various vehicle parts and modifications.18th Sep 1937Box 91 \ 2  scan0362
Test results summary for various automotive parts, detailing outcomes and required actions.18th Sep 1937Box 91 \ 2  scan0363
Test report detailing the results for various vehicle components.18th Sep 1937Box 91 \ 2  scan0364
Test report detailing modifications and standardization decisions for various vehicle parts.18th Sep 1937Box 91 \ 2  scan0365
Table detailing the test results of various vehicle components, including suspension and steering parts.18th Sep 1937Box 91 \ 2  scan0366
Test report summary for various automotive components and their standardisation status.18th Sep 1937Box 91 \ 2  scan0367
Test report summary for various automotive components.18th May 1937Box 91 \ 2  scan0368
Test report on various automotive parts including horns, a starter switch, and road wheels.18th Sep 1937Box 91 \ 2  scan0369
The condition of a Phantom III 32-EX chassis and engine after a 17,110-mile endurance test in France.23th Sep 1937Box 91 \ 2  scan0370
The condition and performance of various engine components after testing.23th Sep 1937Box 91 \ 2  scan0371
Inspection report detailing the condition and failure analysis of engine components including cylinder liners, connecting rods, and bearings.23th Sep 1937Box 91 \ 2  scan0372
Inspection report on the condition of engine valves, fittings, camshaft, and carburettor components.23th Sep 1937Box 91 \ 2  scan0373
Inspection report detailing wear and condition of various engine components after testing.23th Sep 1937Box 91 \ 2  scan0374
Condition report on various engine components, including pumps, fillers, and regulators.23th Sep 1937Box 91 \ 2  scan0375
The post-test condition of fan bearings, petrol pipes, and flywheel and clutch components.28th Sep 1937Box 91 \ 2  scan0376
The wear and condition of various components including the flywheel, clutch, and radiator after testing.23th Sep 1937Box 91 \ 2  scan0377
Vehicle inspection report detailing the condition of the radiator, front axle, and brakes.23th Sep 1937Box 91 \ 2  scan0378
Inspection report on the condition of front hubs, cross steering tubes, and spring suspension components.23th Sep 1937Box 91 \ 2  scan0379
Inspection report detailing spring suspension tests and the condition of rear axle components.23th Sep 1937Box 91 \ 2  scan0380
Condition report on various vehicle components including the rear axle and brakes.23th Sep 1937Box 91 \ 2  scan0381
Inspection report detailing the condition of various vehicle components including hubs, propeller shaft, gearbox, and suspension.23th Sep 1937Box 91 \ 2  scan0382
Continued report on the inspection of gearbox components, including gears, plungers, and shafts.23th Sep 1937Box 91 \ 2  scan0383
Condition report on various vehicle mechanisms and components.23th Sep 1937Box 91 \ 2  scan0384
Damage and distortion to the frame, fittings, and various chassis components.28th Sep 1937Box 91 \ 2  scan0385
Inspection report detailing the condition of frames, fittings, brakes, pedals and springs.23th Sep 1937Box 91 \ 2  scan0386
Condition report detailing wear and damage to various vehicle components.23th Sep 1937Box 91 \ 2  scan0387
Inspections, fouling issues, and poundage checks on various chassis and suspension components.23th Sep 1937Box 91 \ 2  scan0388
The testing and condition of rear shock dampers, specifically their poundage and 'Duprene' glands.23th Sep 1937Box 91 \ 2  scan0389
The condition of rear shock dampers, governor control, and steering column components after testing.23th Sep 1937Box 91 \ 2  scan0390
Vehicle component condition report detailing issues with steering, floorboards, bonnet, and various pumps.23th Sep 1937Box 91 \ 2  scan0391
Electrical units after a 17,000-mile test on vehicle 32-Ex.28th Sep 1937Box 91 \ 2  scan0392
Condition report on various electrical components after testing.23th Sep 1937Box 91 \ 2  scan0393
Blueprint detailing the wear on Bronze Yoke Bearings after 17,110 miles, including dimensional analysis.23th Sep 1937Box 91 \ 2  scan0394
Blueprint illustrating a fouling issue on a rear near side jack bracket after road testing in France.23th Sep 1937Box 91 \ 2  scan0395
Index for a report on an engine's condition after a 17,110-mile test in France.10th May 1937Box 91 \ 2  scan0396
Test report detailing main bearing dimensions and clearances before and after wear.10th May 1937Box 91 \ 2  scan0397
Test report on connecting rod bearings and crankpin dimensions after a mileage test.31th Aug 1937Box 91 \ 2  scan0398
Technical data sheet detailing the dimensions and wear of plain connecting rods and big end bush bearings from a test unit.10th Sep 1937Box 91 \ 2  scan0399
Piston profile measurements showing wear on six pistons at various points before and after testing.10th Sep 1937Box 91 \ 2  scan0400
Piston profile measurements before and after a test, showing wear data.10th Sep 1937Box 91 \ 2  scan0401
Cylinder bore dimension and wear measurement sheet for Phantom III Unit No 13, 'A' Side.10th Sep 1937Box 91 \ 2  scan0402
Test report detailing cylinder bore dimensions and wear for 'B' side liners of unit Phantom III No 13.10th Sep 1937Box 91 \ 2  scan0403
Piston ring clearance measurements for Unit No PH III 13 'A' side.10th Sep 1937Box 91 \ 2  scan0404
Piston ring clearance measurements after testing for Unit No. Phantom III 13 'B' Side.10th Sep 1937Box 91 \ 2  scan0405
Piston ring gap measurement and wear test results for Unit No. Ph III 13, 'A' Side.10th Sep 1937Box 91 \ 2  scan0406
Piston ring gap measurements for Unit No Phantom III 13, showing wear after testing.10th Sep 1937Box 91 \ 2  scan0407
Diagram illustrating damage to an off-side frame after 17,110 miles of use.10th Sep 1937Box 91 \ 2  scan0408
Fault analysis diagram of the exhaust suspension system on a Phantom III chassis after extended mileage.10th Sep 1937Box 91 \ 2  scan0409
Blueprint diagram showing cracks in an off-side roll rod main lever after extended mileage.10th Sep 1937Box 91 \ 2  scan0410
Blueprint showing a broken near side rest angle from a Phantom III after testing in France.25th Jun 1937Box 91 \ 2  scan0411
Performance data comparison of four vehicles at Brooklands race track.25th Jun 1937Box 91 \ 2  scan0412
Listing standardisation sheets following a 15,000-mile test on a 32-EX Phantom III.28th Sep 1937Box 91 \ 2  scan0413
List of modifications and instructions for rebuilding Phantom III car 32-EX, Unit 13.20th Oct 1937Box 91 \ 2  scan0414
List of modifications and instructions for various vehicle components, including the propeller shaft, rear axle, shock dampers, and brakes.26th Oct 1937Box 91 \ 2  scan0415
List of specifications for vehicle electrical components and other parts.26th Oct 1937Box 91 \ 2  scan0416
Requesting the construction and fitting of a rear silencer for the exhaust system on car 32-EX.2nd Nov 1937Box 91 \ 2  scan0417
Request to fit a high pressure petrol pump, filter and associated piping on a chassis.3rd Nov 1937Box 91 \ 2  scan0418
Request to fit a Buick car heater and defroster to the 32-EX car.3rd Nov 1937Box 91 \ 2  scan0419
The decision to fit a Buick heater to car 26.G.Vl instead of 32-EX and the required positioning.18th Nov 1937Box 91 \ 2  scan0420
Examination report on a 32 Ex rear near side damper, detailing wear, scoring, and flaking of components after mileage.26th Nov 1937Box 91 \ 2  scan0421
Modifications for a five-blade fan and pulleys for the 32-EX. Car No.13 unit.7th Jan 1938Box 91 \ 2  scan0422
The replacement of a broken cylinder liner and subsequent checks on other cylinders.21th Jan 1938Box 91 \ 2  scan0423
Instruction memo to fit a single ball drain valve and an additional pipe to the induction system of unit no. 13.25th Jan 1938Box 91 \ 2  scan0424
Request to wire up and fit a warning light for the tank unit on car 32-EX.11th Feb 1938Box 91 \ 2  scan0425
The renewal of a car licence for vehicle 32-EX.11th Feb 1938Box 91 \ 2  scan0426
Urgent internal memo requesting the modification of clutch trunnion G.83281 for 32-EX Unit No.13.17th Feb 1938Box 91 \ 2  scan0427
Log book entry detailing feedback and issues with an experimental car's performance.23th Feb 1938Box 91 \ 2  scan0428
The handover of cars 32-EX and B.23.AE to the Repair Department and associated work.5th Apr 1938Box 91 \ 2  scan0429
List of required part modifications and interchanges for car model 32.EX.6th Apr 1938Box 91 \ 2  scan0430
Car 36.EX, requesting a standard fan replacement after a high-speed fan was dispatched to the U.S.A.12th Apr 1938Box 91 \ 2  scan0431
Requesting the cause for a change speed mechanism seizure on vehicle 32-EX.12th Jun 1936Box 91 \ 3  scan0001
Forwarding a report from Hancock on gearboxes, noting no serious trouble is being experienced on test.13th Jun 1936Box 91 \ 3  scan0002
To H.F. Hamilton regarding Gandy's spherical exhaust mounting pieces and filter positioning for car 32-EX.25th Jun 1936Box 91 \ 3  scan0003
Letter to H.F. Hamilton discussing petrol pump delivery issues at high speeds, engine cooling, and experiments with 'Autoflux' pumps.25th Jun 1936Box 91 \ 3  scan0004
Typed memo to H.F. Hamilton regarding staff movements following an accident.26th Jun 1936Box 91 \ 3  scan0005
Planned trip to Paris to investigate Bentley clutch troubles and test a new cylinder head.27th Jun 1936Box 91 \ 3  scan0006
The condition of a clutch plate and flywheel following a gearbox seizure.9th Jun 1936Box 91 \ 3  scan0007
Drawing showing a section of a flywheel with stud holes and a note on fused fabric.9th Jun 1936Box 91 \ 3  scan0008
Hand-drawn sketch illustrating failures on a clutch plate.9th Jun 1936Box 91 \ 3  scan0009
Letter concerning modifications and replacement parts for a 32-EX clutch.9th Jun 1936Box 91 \ 3  scan0010


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙