Rolls-Royce Archives
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Rolls-Royce Experimental Archives                
Choose Archive


Browsing Records        Page 2349 of 2367        Sort by   Box   Date   Description

Filter      from        to             identifier   [all]
DescriptionDateIdentifier
Non-standardization of wider wheel tracks due to feasibility and international road compatibility.30th Aug 1930West Wittering \ U \ August1930-November1930  Scan036
Analysis of variables like tyre size, inflation, and speed affecting A.T. speedometers.4th Sep 1930West Wittering \ U \ August1930-November1930  Scan037
Continued document discussing calculations for speedometer instrument revolutions per mile.13th Sep 1930West Wittering \ U \ August1930-November1930  Scan038
Analysis of speedometer and odometer accuracy based on tyre size, inflation, speed, and temperature.4th Sep 1930West Wittering \ U \ August1930-November1930  Scan039
Speedometer accuracy at high speed, affected by the centrifugal effect of tyres, and a proposal to correct it.4th Sep 1930West Wittering \ U \ August1930-November1930  Scan040
Continued discussion on the compression of instrument scales above 40 mph.1st Sep 1930West Wittering \ U \ August1930-November1930  Scan041
The causes of brake thumping on the 25HP car and a proposed update for the instruction manual.5th Sep 1930West Wittering \ U \ August1930-November1930  Scan042
Brake and clutch experiments, focusing on materials like Ferodo linings and cast iron.5th Sep 1930West Wittering \ U \ August1930-November1930  Scan043
Clarifying that 43% of Phantom II cars carry either one or two spare wheels at the rear.1st Sep 1930West Wittering \ U \ August1930-November1930  Scan044
Single point radiator mounting scheme for specific complaint cases, mentioning 'jelliers' and diabolo rubber fittings.5th Sep 1930West Wittering \ U \ August1930-November1930  Scan045
Sketch of radiator side fittings on 24EX, showing a combination of parts Nsd. 3062 and Nsd. 3059.5th Sep 1930West Wittering \ U \ August1930-November1930  Scan046
Suggested alterations and design considerations for a K.S. petrol gauge tank fitting.6th Sep 1930West Wittering \ U \ August1930-November1930  Scan047
Vibrations in the 25 HP model caused by the whirling of the propeller shaft at high speeds.8th Sep 1930West Wittering \ U \ August1930-November1930  Scan048
Cooling problems and radiator modifications on the Phantom II cars.9th Sep 1930West Wittering \ U \ August1930-November1930  Scan049
Page 2 of a report stating that a complete report is being prepared following a comparison with the original Phantom II.9th Sep 1930West Wittering \ U \ August1930-November1930  Scan050
Failures and proposed improvements for the Phantom clutch.10th Sep 1930West Wittering \ U \ August1930-November1930  Scan051
Ongoing clutch issues related to the driven member, pressure plate binding, and subsequent modifications.10th Sep 1930West Wittering \ U \ August1930-November1930  Scan052
Recommendation to increase the adjustment range for the hand brake lever on left-hand drive chassis.11th Sep 1930West Wittering \ U \ August1930-November1930  Scan053
Tests of an automatic boost regulator, detailing initial inconsistent results due to friction and subsequent improvements.11th Sep 1930West Wittering \ U \ August1930-November1930  Scan054
Engine boost control adjustments and performance under various throttle and altitude conditions.11th Sep 1930West Wittering \ U \ August1930-November1930  Scan055
Issues with friction and 'hunting' in engine controls, boost regulators, and magneto operation.11th Sep 1930West Wittering \ U \ August1930-November1930  Scan056
Performance graph of an automatic boost regulator for an F. Engine T.49 under test conditions.11th Sep 1930West Wittering \ U \ August1930-November1930  Scan057
The mileage testing of Watford Type E.W.6A magnetos with tungsten points.11th Sep 1930West Wittering \ U \ August1930-November1930  Scan058
Recommendation to standardise the fitting of tungsten contact points to EW6A magnetos following successful testing.1st Sep 1930West Wittering \ U \ August1930-November1930  Scan059
The characteristics and issues with thermostat-controlled radiator shutters.12th Sep 1930West Wittering \ U \ August1930-November1930  Scan060
Graphical chart detailing Smith's Calorstat tests, plotting load versus temperature for radiator shutter operation.9th Sep 1930West Wittering \ U \ August1930-November1930  Scan061
Blank cover sheet with a purple ink stamp in the bottom right corner.12th Sep 1930West Wittering \ U \ August1930-November1930  Scan062
Cover note for attached documents concerning valve spring coil vibrations.3rd Sep 1930West Wittering \ U \ August1930-November1930  Scan063
The failure of American-supplied bumpers during stress testing.15th Sep 1930West Wittering \ U \ August1930-November1930  Scan064
Blueprint of a component showing front and rear views with dimensions.13th Sep 1930West Wittering \ U \ August1930-November1930  Scan065
Blank document with a Print Room date stamp.13th Sep 1930West Wittering \ U \ August1930-November1930  Scan066
Requesting the return of a Quadruplex pump sent for evaluation, as the manufacturer is now pressing for payment.15th Sep 1930West Wittering \ U \ August1930-November1930  Scan067
Technical memorandum comparing two types of Phantom clutches and their associated performance issues.15th Sep 1930West Wittering \ U \ August1930-November1930  Scan068
Clutch faults, performance testing, and a proposal to demonstrate its superiority over a competitor's design.15th Feb 1930West Wittering \ U \ August1930-November1930  Scan069
Development of silent third and easy-change gearboxes and the testing of a new four-speed box from an American company.19th Sep 1930West Wittering \ U \ August1930-November1930  Scan070
Letter from Rolls-Royce of America concerning the evaluation of an internal geared transmission from Automotive Research Corp.6th Sep 1930West Wittering \ U \ August1930-November1930  Scan071
Letter discussing a new 'selector' shift gearbox, ideal axle ratios, and a torque-equalized brake system.6th Sep 1930West Wittering \ U \ August1930-November1930  Scan072
Letter from Carl A. Neracher regarding Chrysler's spool gear type transmissions and their potential application.6th Sep 1930West Wittering \ U \ August1930-November1930  Scan073
Letter discussing synchromesh transmissions, Chrysler's experience, and arranging a test of a small transmission.10th Sep 1930West Wittering \ U \ August1930-November1930  Scan074
On the testing of nitro hardened steel crankshafts and a recommendation for an initial order.10th Sep 1930West Wittering \ U \ August1930-November1930  Scan075
Proposing a visit to bring a left-hand drive car fitted with an anti-spilling radiator and low-friction shutters.23th Sep 1930West Wittering \ U \ August1930-November1930  Scan076
The cooling efficiency of different radiator types for the Phantom II model.24th Sep 1930West Wittering \ U \ August1930-November1930  Scan077
Report discussing the efficiency of direct versus indirect radiator cooling, with an attached graph showing mean air speed through a radiator versus car speed.24th Sep 1930West Wittering \ U \ August1930-November1930  Scan078
Radiator efficiency tests, comparing different types and analyzing heat dissipation.24th Sep 1930West Wittering \ U \ August1930-November1930  Scan079
Comparison of radiator tube designs (round, square, hexagon) focusing on efficiency, surface area, and construction.24th Feb 1930West Wittering \ U \ August1930-November1930  Scan080
Improving radiator cooling efficiency by adjusting tube thickness and design, and examining the effects on engine temperature.24th Sep 1930West Wittering \ U \ August1930-November1930  Scan081
Continued discussion on Chrysler radiator design and its matrix with fine air passages.24th Feb 1930West Wittering \ U \ August1930-November1930  Scan082
Comparative analysis table of different radiator tube designs and their performance metrics.24th Feb 1930West Wittering \ U \ August1930-November1930  Scan083
Graph and table comparing the performance of different types of radiator cores for slow-speed cooling.24th Sep 1930West Wittering \ U \ August1930-November1930  Scan084
Blank page stamped by the Print Room in Derby.24th Sep 1930West Wittering \ U \ August1930-November1930  Scan085
Technical drawing of a square matrix tube.11th Sep 1930West Wittering \ U \ August1930-November1930  Scan086
The reverse of a document showing a purple ink 'Print Room' stamp from Derby.25th Sep 1930West Wittering \ U \ August1930-November1930  Scan087
Extensive testing of a push-button switch without carbon contacts.30th Sep 1930West Wittering \ U \ August1930-November1930  Scan088
Summary of experiments conducted on flywheel vibrations for a 25 HP engine.2nd Oct 1930West Wittering \ U \ August1930-November1930  Scan089
Experimental notes on engine flywheel vibration and its measurement.2nd Oct 1930West Wittering \ U \ August1930-November1930  Scan090
Engine flywheel experiments concerning inertia, vibration, and performance.2nd Oct 1930West Wittering \ U \ August1930-November1930  Scan091
Testing clutchless flywheel configurations and their effect on engine smoothness, vibration and noise.3rd Oct 1930West Wittering \ U \ August1930-November1930  Scan092
Investigation into flywheel vibrations and attempted solutions.3rd Oct 1930West Wittering \ U \ August1930-November1930  Scan093
Failures and proposed modifications for the Phantom II battery box supports.6th Oct 1930West Wittering \ U \ August1930-November1930  Scan094
Modification drawing for a battery box support, detailing an additional bracket and stiffener.6th Oct 1950West Wittering \ U \ August1930-November1930  Scan095
Road tests of the Daimler Fluid Flywheel and Easy Change Gearbox fitted to a 50/40 Double Six chassis.7th Oct 1930West Wittering \ U \ August1930-November1930  Scan096
Test report on a vehicle's fluid flywheel and gearbox performance following brutal treatment.7th Oct 1930West Wittering \ U \ August1930-November1930  Scan097
Report and diagrammatic sketch explaining the Maybach Overspeed Gear system.7th Oct 1930West Wittering \ U \ August1930-November1930  Scan098
Report page continuing the analysis of competitor vehicle gearboxes and performance, specifically Daimler and Cadillac.7th Oct 1930West Wittering \ U \ August1930-November1930  Scan099
Road test report on a Daimler Double Six 30/40 chassis.7th Oct 1930West Wittering \ U \ August1930-November1930  Scan100
Test report detailing the specifications and performance of a 16-cylinder Cadillac, page 6.17th Oct 1930West Wittering \ U \ August1930-November1930  Scan101
Performance and noise comparison report between a Phantom II model and a Cadillac.17th Oct 1930West Wittering \ U \ August1930-November1930  Scan102
Performance evaluation report on a Cadillac, covering cooling, brakes, clutch, and steering.17th Oct 1930West Wittering \ U \ August1930-November1930  Scan103
The suspension, performance, and specifications of a 12 Cylinder Maybach, with comparisons to other cars.17th Oct 1930West Wittering \ U \ August1930-November1930  Scan104
The Harris Leon-Laisne's suspension and the frame design of an 8-cylinder Chrysler.17th Oct 1930West Wittering \ U \ August1930-November1930  Scan105
Report page discussing automotive frame, radiator, and wing designs of competitor vehicles.17th Oct 1930West Wittering \ U \ August1930-November1930  Scan106
Notes on Gallay radiators, chassis design, and the Voisin magnetic relay.17th Oct 1930West Wittering \ U \ August1930-November1930  Scan107
Description of the Voisin magnetic relay transmission system with a diagram.7th Oct 1930West Wittering \ U \ August1930-November1930  Scan108
Summary of trial findings on twelve-cylinder engines, highlighting unresolved issues with power unit noise and suspension.7th Oct 1930West Wittering \ U \ August1930-November1930  Scan109
Inconsistent test results for a square tube radiator.7th Oct 1930West Wittering \ U \ August1930-November1930  Scan110
Testing modified Dunlop Silent Tread Tyres for road adhesion and noise.7th Oct 1930West Wittering \ U \ August1930-November1930  Scan111
Proposal to standardise a new type of tyre following successful trials showing improved adhesion and wear.7th Oct 1930West Wittering \ U \ August1930-November1930  Scan112
Arranging to carry the bonnet over the dashboard on the Phantom 11 N.2 Series.13th Oct 1930West Wittering \ U \ August1930-November1930  Scan113
Sixth Brooklands report on a series of tests on six different types of radiator core.14th Oct 1930West Wittering \ U \ August1930-November1930  Scan114
Tests of different radiator tube designs to improve cooling efficiency.14th Oct 1930West Wittering \ U \ August1930-November1930  Scan115
Continued analysis of radiator tube efficiency, including a review of different tube types and the Gallay radiator.24th Oct 1930West Wittering \ U \ August1930-November1930  Scan116
Comparison of radiator tube designs, including a sample from Rolls-Royce of America, and their impact on cooling efficiency.14th Oct 1930West Wittering \ U \ August1930-November1930  Scan117
Comparison of square and round radiator tubes at full throttle and low speeds.14th Oct 1930West Wittering \ U \ August1930-November1930  Scan118
Performance comparison of different types of radiator tubes tested on a 19EX car at Brooklands track.14th Oct 1930West Wittering \ U \ August1930-November1930  Scan119
Graph plotting hydraulic restriction characteristics of a parallel square tube radiator against engine RPM.14th Oct 1930West Wittering \ U \ August1930-November1930  Scan120
Blank document page with a purple ink date stamp from the Print Room.14th Oct 1930West Wittering \ U \ August1930-November1930  Scan121
Graph plotting water flow tests against water temperature for a P.I. No 7 unit standard radiator.14th Oct 1930West Wittering \ U \ August1930-November1930  Scan122
Stamped by the Print Room in Derby.14th Oct 1930West Wittering \ U \ August1930-November1930  Scan123
Experimental findings on the performance of tungsten contact points and related condenser capacity.14th Oct 1930West Wittering \ U \ August1930-November1930  Scan124
Ignition distributor condenser capacity, materials, and performance after a 10,000-mile test.4th Oct 1930West Wittering \ U \ August1930-November1930  Scan125
Test report on distributor point oxidation, examining the effects of varying condenser capacities.4th Oct 1930West Wittering \ U \ August1930-November1930  Scan126
Test results for lower capacity condensers on 20/25 HP and Phantom II chassis to address misfiring.14th Oct 1930West Wittering \ U \ August1930-November1930  Scan127
Experiments investigating flywheel vibrations on a 25 HP engine.20th Oct 1930West Wittering \ U \ August1930-November1930  Scan128
Investigation into flywheel vibrations by systematically isolating components to determine the source.20th Oct 1931West Wittering \ U \ August1930-November1930  Scan129
Experiments to diagnose flywheel and crankshaft vibrations, including specifications for a standard flywheel and clutch.20th Oct 1930West Wittering \ U \ August1930-November1930  Scan130
Results of radiator tests comparing different tube and bonnet designs.20th Oct 1930West Wittering \ U \ August1930-November1930  Scan131
Comparison of square versus round radiator tubes for performance and cost.20th Oct 1930West Wittering \ U \ August1930-November1930  Scan132
Table comparing critical atmospheric overheating temperatures for different radiator types under various driving conditions.20th Oct 1930West Wittering \ U \ August1930-November1930  Scan133
Inspection and test report on a Delco-Remy combined ignition distributor and contact breaker unit.20th Oct 1930West Wittering \ U \ August1930-November1930  Scan134
Inspection and bench test report for a Delco-Remy Ignition Distributor.20th Oct 1930West Wittering \ U \ August1930-November1930  Scan135


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙