Rolls-Royce Archives
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Rolls-Royce Experimental Archives                
Choose Archive


Browsing Records        Page 2257 of 2367        Sort by   Box   Date   Description

Filter      from        to             identifier   [all]
DescriptionDateIdentifier
Test report on magneto performance, detailing primary/secondary resistances and milli-ampere readings.31th Jul 1922West Wittering \ I \ July1922  Scan130
Performance comparison graph of DC Volts and Amperes versus RPM for various dynamos.10th Jul 1922West Wittering \ I \ July1922  Scan131
Test report measuring the slip of the Goshawk fan belt and its effect on radiator airflow.1st Jun 1922West Wittering \ I \ June1922  Scan0
Inlet and outlet water temperature tests at various speeds, including a table of results and conclusions on Goshawk cooling.1st Jun 1922West Wittering \ I \ June1922  Scan1
Report detailing daily mileage, total mileage since leaving Derby, and the failure of a CAV dynamo.4th Jun 1922West Wittering \ I \ June1922  Scan2
Heat damage to a dynamo and a battery, causing insulation failure and melting.6th Jun 1922West Wittering \ I \ June1922  Scan3
Report detailing vehicle faults including a broken speedometer and worn spring shackles.29th Jun 1922West Wittering \ I \ June1922  Scan4
Broken swan neck exhaust pipe bracket being patched with wire, following a request for spare top spring plates.2nd Jun 1922West Wittering \ I \ June1922  Scan5
The condition and replacement of tyres for car 79II.4th Jun 1922West Wittering \ I \ June1922  Scan6
Tyre defects and a cracked crankcase on car 79H.13th Jun 1922West Wittering \ I \ June1922  Scan7
Examination report on a Goshawk 11 engine cylinder head after boiling and detonation tests.7th Jun 1932West Wittering \ I \ June1922  Scan8
Engine run without water, detailing observations and proposing further road tests to reproduce a cylinder head failure.23th Jun 1922West Wittering \ I \ June1922  Scan9
Testing a Goshawk 11 gearbox vent, which resulted in oil leakage and emulsion.9th Jun 1922West Wittering \ I \ June1922  Scan10
Report of a recurring front spring failure on car 6-Goshawk-11 and the dispatch of new replacement springs.9th Jun 1922West Wittering \ I \ June1922  Scan11
Failing Goshawk II battery box brackets and a proposal for a more secure modification.10th Jun 1922West Wittering \ I \ June1922  Scan12
Testing of Goshawk II rear axle shafts made from two different types of steel.2nd Jun 1922West Wittering \ I \ June1922  Scan13
Investigation into Goshawk engine cooling issues and cylinder head cracking due to material choice.13th Jun 1922West Wittering \ I \ June1922  Scan14
Investigation into why some cylinder heads cracked, attributing the cause to the material or its condition.13th Jun 1922West Wittering \ I \ June1922  Scan15
Letter detailing mileage and observations on engine overheating during a road test.14th Jun 1922West Wittering \ I \ June1922  Scan16
Engine cooling tests comparing performance with and without a bonnet, alongside notes on various mechanical repairs.14th Jun 1922West Wittering \ I \ June1922  Scan17
Faulty ball bearing, and a discussion of personnel and vehicle logistics.14th Jun 1922West Wittering \ I \ June1922  Scan18
The unavailability of a car designated for an amateur drivers test.4th Jun 1922West Wittering \ I \ June1922  Scan19
Telegram received by telephone regarding the commencement of an 'amateurs test'.14th Jun 1922West Wittering \ I \ June1922  Scan20
Return of car G-Goshawk-11 to the Works and plans for fitting modified parts.14th Jun 1922West Wittering \ I \ June1922  Scan21
Road test in France detailing the testing of new fan blades to solve an engine overheating problem.10th Jun 1922West Wittering \ I \ June1922  Scan22
Road testing, detailing issues with dynamo noise, tappets, and engine boiling, with suggestions for future monitoring.10th Jun 1922West Wittering \ I \ June1922  Scan23
Vehicle's road test performance, detailing overheating on a hill, brake squeak, gearbox rattle, and a mileage log.14th Jun 1932West Wittering \ I \ June1922  Scan24
Weights of the Goshawk 11 car and a comparison of front axle weights with the 40/50 HP model.14th Jun 1932West Wittering \ I \ June1922  Scan25
The weights of various Goshawk car body styles with and without passengers.14th Jun 1932West Wittering \ I \ June1922  Scan26
Comparison of front axle weights between the 40/50 HP and Goshawk II models.15th Jun 1922West Wittering \ I \ June1922  Scan27
Hill climb test out of Vizille, detailing performance, weather conditions, and gradient calculations.15th Jun 1922West Wittering \ I \ June1922  Scan28
Upholstery dye running when wet and a request for a replacement dynamo due to a noisy bearing.15th Jun 1922West Wittering \ I \ June1922  Scan29
The comparative test of standard nickel chrome and air hardened axle shafts for the Goshawk car.6th Jun 1922West Wittering \ I \ June1922  Scan30
Dispatch of and modifications to a Goshawk Limousine, X4219.9th Jun 1922West Wittering \ I \ June1922  Scan31
Test report on the Goshawk engine's cooling system performance when started with low water levels.19th Jun 1922West Wittering \ I \ June1922  Scan32
Test report on Goshawk & Focker rollers, noting the formation of flats and recommending a new design to replace them.19th Jun 1922West Wittering \ I \ June1922  Scan33
The performance and premature wear issues of Hartford shock absorbers fitted to cars.22th Jun 1922West Wittering \ I \ June1922  Scan34
Continued memo regarding a guarantee for shock absorbers and increased bearing areas.28th Jun 1922West Wittering \ I \ June1922  Scan35
Front spring failures for the Goshawk model, and the testing of new springs with an increased rating.28th Jun 1922West Wittering \ I \ June1922  Scan36
Issues with cracking Goshawk aluminium brake shoes and the proposed modifications.1st Jun 1922West Wittering \ I \ June1922  Scan37
Cracking issues discovered in Goshawk cast iron cylinder heads.28th Jun 1922West Wittering \ I \ June1922  Scan38
Continuation page discussing component stress and the risk of cracking when an engine runs out of water.28th Jun 1922West Wittering \ I \ June1922  Scan39
Issues with the preparation, engine, and body of a 3-Goshawk-11 car.29th Jun 1922West Wittering \ I \ June1922  Scan40
Issues and modifications to a car, including problems with the controls, accelerator, and dynamo.30th Jun 1922West Wittering \ I \ June1922  Scan41
Deficiencies found in a 7-Goshawk-11 car, including issues with the rear wheel, brakes, and steering.30th Jun 1922West Wittering \ I \ June1922  Scan42
Failure and testing of a Goshawk steering box and its supporting tube.30th Jun 1932West Wittering \ I \ June1922  Scan43
Analysis of engine unit movement and steering box failure, specifically referencing Goshawk models.1st Jun 1922West Wittering \ I \ June1922  Scan44
Trial of a Hoffmann deep groove bearing for the Goshawk rear axle, in competition with a New Departure bearing.1st Jun 1922West Wittering \ I \ June1922  Scan45
Fitment, clearances, and proposed design alteration of the Goshawk undershield.1st Jun 1922West Wittering \ I \ June1922  Scan46
Treatment of an undershield on a sloping cross member, referencing the Goshawk design.2nd Jun 1922West Wittering \ I \ June1922  Scan47
Ignition issues with a No.4 Goshawk engine, detailing problems with the distributor, rocker spring, and spark plug adjustments.2nd Jun 1922West Wittering \ I \ June1922  Scan48
Improvements for Goshawk steering column controls and instrument board fittings.2nd Jun 1922West Wittering \ I \ June1922  Scan49
Revised layout of the Goshawk instrument board.2nd Jun 1922West Wittering \ I \ June1922  Scan50
Modifications to the Goshawk bonnet and radiator to alter its proportions from the 40/50 model.2nd Jun 1922West Wittering \ I \ June1922  Scan51
The poor quality of Goshawk engine tappets, detailing issues with non-hardened, incorrectly sized nuts, screws, and spanners.2nd Jun 1922West Wittering \ I \ June1922  Scan52
Ignition issues and suggested modifications for a Goshawk engine.2nd Jun 1922West Wittering \ I \ June1922  Scan53
Fortunate failure of experimental Goshawk dynamo brushes.7th Jun 1922West Wittering \ I \ June1922  Scan54
Confirmation of a wire from Royce regarding a fracture caused by water loss and suggested modifications.7th Jun 1922West Wittering \ I \ June1922  Scan55
Cause of and potential solutions for a cracked Goshawk engine cylinder head.7th Jun 1922West Wittering \ I \ June1922  Scan56
Comparing Dunlop and Rudge-Whitworth wheels for the Goshawk project.7th Jun 1922West Wittering \ I \ June1922  Scan57
Complaint and replacement offer for a Dunlop tyre cover for a Delage car.8th Jun 1922West Wittering \ I \ June1922  Scan58
Lubrication options for the Goshawk pedal countershaft.8th Jun 1922West Wittering \ I \ June1922  Scan59
Internal memorandum discussing revised 'D' type floorboards for the Goshawk project.8th Jun 1922West Wittering \ I \ June1922  Scan60
Modifications to the Goshawk engine's water circulation system, including pipes, fan, and radiator.9th Jun 1922West Wittering \ I \ June1922  Scan61
Query investigating the effects of water loss and overheating on the cooling system, specifically regarding temperature rise and alarm signals.9th Jun 1922West Wittering \ I \ June1922  Scan62
Use of tougher metals and modifications for Goshawk engine cylinder heads to prevent cracking.9th Jun 1922West Wittering \ I \ June1922  Scan63
The overheating of the Goshawk engine, suggesting tests and material improvements for castings.9th Jun 1922West Wittering \ I \ June1922  Scan64
Proposal by Mr. Royce to fit Goshawk handles to the 40/50 bonnet to make it easier to lift.9th Jun 1922West Wittering \ I \ June1922  Scan65
The status of modifications to the Goshawk Bendix to prevent sticking.9th Jun 1922West Wittering \ I \ June1922  Scan66
Incorrectly fitted rubber strip on the Goshawk radiator suspension.9th Jun 1922West Wittering \ I \ June1922  Scan67
Standardising spring washers based on drawing TDC 1594 and removing certain nut sizes from standard lists.10th Jun 1922West Wittering \ I \ June1922  Scan68
Modifications to the Goshawk 11 cylinder head to reduce cracking.13th Jun 1922West Wittering \ I \ June1922  Scan69
40/50 engine cooling, the effects of running without water, and experiments to prevent boiling.13th Jun 1922West Wittering \ I \ June1922  Scan70
Comparative tests on water loss from boiling with different radiator filler caps.13th Jun 1932West Wittering \ I \ June1922  Scan71
Engine boiling time and steam loss with and without the fan operating.13th Jun 1922West Wittering \ I \ June1922  Scan72
The design and specifications for the Goshawk instrument board.14th Jun 1922West Wittering \ I \ June1922  Scan73
Page 2 of a letter detailing that a board must be fixed to the scuttle and a coachwork print will be sent.14th Jun 1922West Wittering \ I \ June1922  Scan74
Proposed modifications to the steering column controls for the Goshawk.14th Jun 1922West Wittering \ I \ June1922  Scan75
Proposed improvements for Goshawk tappet rollers to prevent flats.16th Jun 1922West Wittering \ I \ June1922  Scan76
Proposed modifications to the Goshawk bonnet and radiator.16th Jun 1922West Wittering \ I \ June1922  Scan77
Following Mr. Rowledge's visit, outlining decisions on the Aero Engine Programme, including swash plate experiments and engine starters.19th Jun 1922West Wittering \ I \ June1922  Scan78
Policy document outlining future design considerations for new aero engines, including various cylinder configurations and power outputs.7th Jun 1932West Wittering \ I \ June1922  Scan79
Hardening processes for parts and failures related to Eagle gears.19th Jun 1922West Wittering \ I \ June1922  Scan80
From RS to EFC providing Mr. Royce's remarks on several standardisation sheets.19th Jun 1922West Wittering \ I \ June1922  Scan81
Stiff Goshawk valve gear rocker spindle, questioning the Experimental department about the need for a stronger design.20th Jun 1922West Wittering \ I \ June1922  Scan82
Modifications to the Goshawk fan mounting, putting a hold on the production of the fan bracket and hub.21th Jun 1922West Wittering \ I \ June1922  Scan83
Modifications for the Goshawk carburetter.20th Jun 1922West Wittering \ I \ June1922  Scan84
Recommendation to standardise a modification for the 2 BA box spanner.20th Jun 1922West Wittering \ I \ June1922  Scan85
Sketch for a raised Goshawk 'B' type steering wheel.20th Jun 1922West Wittering \ I \ June1922  Scan86
Alterations to the Goshawk engine, specifically cancelling rollers on valves due to flats forming and replacing them with case-hardened rockers.21th Jun 1922West Wittering \ I \ June1922  Scan87
Suggested modification to the radiator height and width on the No. 3 Goshawk Limousine.21th Jun 1922West Wittering \ I \ June1922  Scan89
Car body types and features for the Goshawk model.23th Jun 1922West Wittering \ I \ June1922  Scan90
Modifications to the Goshawk crankcase bolting at the rear end.23th Jun 1922West Wittering \ I \ June1922  Scan91
The arrangement of the Goshawk throttle control.23th Jun 1922West Wittering \ I \ June1922  Scan92
Design feedback on the No.3 Goshawk Hooper Original Limousine, covering its appearance, steering, and pedals.23th Jun 1922West Wittering \ I \ June1922  Scan93
Feedback and proposed modifications for a vehicle's floorboards, seating, clutch, body, radiator, and tank.23th Jun 1922West Wittering \ I \ June1922  Scan94
Modifications to a car's radiator, bodywork, and chassis.23th Jun 1922West Wittering \ I \ June1922  Scan95
Issues found with the No. 3 Goshawk Hooper limousine upon its arrival.23th Jun 1922West Wittering \ I \ June1922  Scan96
Poor condition of a chassis due to a faulty non-standard dynamo and neglect.10th Dec 1920West Wittering \ I \ June1922  Scan97
Goshawk engine's performance issues and proposing a test arrangement for future designs like the Vulture marine engine.23th Jun 1922West Wittering \ I \ June1922  Scan98


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙